Epo-Tek 353ND Epoxy, 4g PE353ND-4G

High Speed; Fiber Type SM, PM, RC; 780-1625 nm; Fiber Length 5-17 m; Fiber Stretch 0.035-0.21 µm/V; Fiber Leads 1 m, 0.9 mm OD Jacket; Connector Type Bare Fiber, FC/PC, FC/APC The PZ1 series are the high-speed members of Optiphase’s family of fiber stretchers. At the core of the PZ1 high-speed fiber stretchers is a fiber wound piezoelectric element for use in a wide range of optical interferometric measurement and sensing system applications. Optiphase’s expertise in the design, manufacture and use of all-fiber interferometers has produced a unique multi-layer winding approach resulting in an enhanced modulation function while maintaining a high operational frequency. PZ1 high-speed fiber stretchers are available with single mode (SM), commercial polarization maintaining (PM, Panda or Bowtie) or SM reduced cladding (RC) fiber types PZ1 high-speed fiber stretchers deliver a high performance to cost ratio, exceeding all other known competitive devices. The compact and low-profile form factor makes the PZ1 series easily configurable into small spaces. In addition, Optiphase fiber stretchers are unique in that they do not require proprietary drivers. For most low-voltage applications (<±15 V), Optiphase stretchers can be driven by standard electronics such as signal generators, op-amps or other laboratory equipment without modification. For more information on how to drive PZ1 high-speed fiber stretchers see the downloadable application note. Key Features: High Speed Compact Package Fiber Type: Single Mode (SM), Polarization Maintaining (PM )or Reduced Cladding SM (RC) Fiber Multiple Termination Choices Unique Multi-layer Winding Can Be Driven With General Purpose Electronics Operational Wavelength: 780 to 1625 nm Fiber Stretch: 0.035 to 0.21 µm/V Optical Path Displacement (n = 1): 0.05, 0.2, 0.3 µm/V Time Delay: 0.00017 to 0.001 ps/V Fiber Length: 5, 12.3, 17 m Inclusive Fiber Wind: 4 Layer (1 Layer PM Version Available) Optical Loss: ≤0.5 dB Maximum Voltage Range: ±500 V (Off Resonance, 1,000 V Peak-to-Peak) Fiber Leads: 1 m, 900 μm Loose Tube Connector Type: Bare Fiber, FC/PC, FC/APC Dimensions: 50.8 x 50.8 x 21.6 mm Applications: Open Loop Demodulation; Sensor Simulation; Variable Optical Delay; General Purpose Fiber Interferometry; Large-angle Modulation of Interferometric Phase

Fiber Type SM, MM, PM; 400 to 2000 nm; Focused Spot Size 2.0 to 6.5 µm; Working Distance 3 to 30 µm; Minimum Strip Distance 5 mm; Return Loss -20 dB Standard, -25 dB With AR Coating OZ Optics TSMJ/TMMJ/TPMJ series of tapered and lensed fibers offers a convenient way to improve coupling between optical fibers and waveguide devices, laser diodes or photo diodes. By laser shaping the fiber end, the light can be transformed to improve mode matching and coupling efficiency with the waveguide device, laser diode chip or photodiode chip. The manufacturing process allows for improved coupling to either circular or oval input spots (this must be specified in advance). OZ Optics tapered and lensed fibers are manufactured by laser shaping the endface to create the optimal light output/input for specific applications. This method provides the best coupling efficiencies and mode matching abilities in a taper. An alternative technique is to instead polish the end face of the fiber to a specific radius and taper angle, forming a lens. Oval spots can also be formed using the polishing technique, normally by shaping the fiber to form a chisel or wedge shape. Single mode (SM), multi mode (MM) or Panda type polarization maintaining (PM) fibers can be tapered. For multi mode fibers, only polished versions with a polish radius and taper angle can be produced. OZ Optics can also generate other polish profiles, such as wedge shapes, which are useful for coupling strip laser diodes into multimode fibers. In general, OZ Optics uses polarization maintaining fibers based on the PANDA fiber structure when building polarization maintaining (PM) components and patch cords. However, OZ Optics can construct devices using other PM fiber structures. OZ Optics also carries some alternative fiber types in stock, please contact AMS Technologies for availability. If necessary, OZ Optics is willing to use customer supplied fibers to build devices. Custom configurations can be designed if required. Tapered fibers can be incorporated into other OZ Optics assemblies including the HSMJ, HMMJ, HPMJ series of hermetically sealable patchcords with metal solder, the HGSMJ/HGMMJ/HGPMJ series of hermetically sealable patchcords with glass solder or the VGA series of V-Groove assemblies, thus aiding in the development of photonic devices that meet Telcordia requirements. Contact AMS Technologies for more information on your customized tapered fiber project. Key Features: Wide Wavelength Range: 400 to 2000 nm, Other Wavelengths on Demand Improved Coupling to and from Waveguides, Laser Diodes and Photodiodes Single Mode (SM), Multi Mode (MM) or Polarization Maintaining (PM) Fibers Anti Reflection (AR) Coated Endfaces Available Can be Made Based on Either Spot Size or Taper Shape Metalized Fiber Versions Available Hermetically Sealable Versions Available Other Custom Configurations Available Chisel and Wedged Shaped End Faces Available Applications: Active Component Pigtailing; DWDM Devices; Waveguide Packaging; MEMS Device Connections; Miniaturized Fiber Optic Components; Coupling to Circular or Elliptical Beam Outputs