Index Matching Liquid IML 150 (1oz bottle)

High Fiber Cleaving Strength; Fiber Cladding Diameter 80-250 µm; Typ. Cleave Angle <0.5°; Ultrasonic Diamond Scribe Technology; Supports Fujikura, Fitel, 3SAE Technologies Fiber Holders NorthLab’s ProCleave HS is an advanced electronic fiber cleaver for fibers with a cladding diameter of up to 250 μm. The cleaver is specifically designed for use in production lines where ease-of-use, process speed and a high production yield is crucial. The cleaver is at the same time well suited for R&D environments. ProCleave HS is utilizing an advanced ultrasonic diamond scribe technology to achieve optimal cleave performance and consistency. The cleaver generates very flat end-faces, low cleave angles (typical <0.5°) with minimum blade intrusion. ProCleave HS has a clamping mechanism which is designed for ease of use and with process speed in mind. The system is powered from an external power supply or the built-in rechargeable battery. The cleaver is used together with a fiber holder from a fusion splicer (adapted for all main splicer brands). Key Features: Automated Cleave Process for Optimal Cleave Quality and Repeatability Universal Fiber Clamping Mechanism Designed for Fiber Cladding Diameters From 80 to 250 µm Supported Fiber Coating: Depending on Fiber Holder Low Cleave Angles With Very Flat End Faces, Typical <0.5° (125 μm, SMF28) Operates on Built-in Rechargeable Li-Ion Battery or External Power Supply (100 to 240 VAC) Available Platforms Support Fujikura, Fitel and 3SAE Technologies Fiber Holders Dimensions: 150 x 95 x 45 mm, 150 x 115 x 55 mm Including Lever Application: High-strength Cleaving of Fibers With a Cladding Diameter of up to 250 μm

Liquid to Ambient Air Cooling System; 1,300 to 3,500 W @ 25 K initial temperature difference; Modular; 230, 115 V; 4.9 to 8.7 l/min @2.1 bar Lytron’s MCS series of modular liquid cooling systems are a cost-effective and reliable option where precise temperature control and cooling below ambient temperature are not required. These systems consist of a high-performance heat exchanger integrated with a fan, pump and tank in a durable metal chassis. MCS modular liquid cooling systems feature cooling capacities of up to 3.5 kW. Components of MCS modular liquid cooling systems are performance-matched for maximum cooling capacity. The most critical component, the heat exchanger, is designed for optimum performance. All components have been designed for long life and high reliability. Lytron offers systems that are compatible with a range of coolants, ensuring there is an option available for nearly every fluid. MCS modular liquid cooling systems are easy to use with installation instructions as simple as completing the liquid loop, filling the liquid reservoir tank and flipping the switch. These systems offer a fast option for upgrading to liquid cooling in a cost effective and reliable package. Key Features: Cooling Capacity: 1,300 to 3,500 W @ 25 K initial temperature difference (hot coolant temperature  – cold ambient air temperature)  Fluid Connections: ½” FNPT Reservoir Capacity: 2.8 l Maximum Liquid Temperature: +55 °C Recommended Coolant: Water (MCS30: Oil, EGW) Pump Performance: 4.9 to 8.7 l/min @ 2.1 bar Dimensions: 439 x 384 x 338 mm (MCS20/MCS30), 381 x 381 x 610 mm (MCS40/MCS50) Applications: Power Supply Cooling; Power Conversion Cooling; Process Automation Systems; Security Screening; Sample Test Equipment Cooling Systems; Diagnostic Systems; Medical Lasers; MRI; Edge Computing Center Cooling Systems