High Refractive Index Optical Adhesives

Cleaning Tools for Connectors, Plugs & Adapters; Pen, Simple or Stick Types; Connector Types MU, LC, SC, SC2, FC, FAS, FA, ST, E2000, PC/APC, ODC, MPO, MPT, ATC, Ø1.25 mm, Ø2.5mm; No Alcohol or SolventsNTT Advanced Technology Corporation’s NEOCLEAN series of fiber optical connector cleaners are tools that combine compactness with the workability of one-push cleaning. NEOCLEAN tools remove dirt you can’t even see, without scratching the connector’s end face.Designed to work with dedicated microfiber tissue, the NEOCLEAN series of fiber optical connector cleaners allows all operators to consistently achieve high quality cleaning without alcohol or other solvents.With NEOCLEAN-E, NEOCLEAN-EZ and NEOCLEAN-M/M2, the NEOCLEAN line of pen type fiber optical connector cleaners provides a line-up of nine different high performance hybrid type cleaners that provide cleaning for a broad range of both optical connector plugs and adaptors in one unit.The NEOCLEAN-E simple one push action cleans the ferrule end face in device adapters. Its cleaning cartridge is replaceable, with each cartridge performing about 750 cleanings, greatly reducing cleaning costs. Using the attached cap you can also the clean ferrule end face in plugs. The NEOCLEAN-EZ line features an especially compact body, designed for cleaning in the narrow spaces of optical connector ports with a one push action. Simply remove the front tip cap to clean optical plugs. Fixing the attachment to the rear end allows you to also clean deeply recessed optical ports.NEOCLEAN-EZv is developed exclusively for easy cleaning of 2 mm broadcasting and video optical connectors, while NEOCLEAN-EZ3 can clean 2.5 mm optical connector ports and plugs as well as 2 mm video connectors. NEOCLEAN-EZ1Plus can clean 1.25 mm optical connector ports, ODC plugs and ODC sockets.The NEOCLEAN-M series of pen type cleaners allows you to instantly clean MPO/MTP connectors. NEOCLEAN-M for 12-core systems and NEOCLEAN-M2 for 16-core systems respond to the need for end face cleaning.NTT-AT’s NEOCLEAN-R2 line of simple type fiber optical connector cleaners uses cleaning tape that does not produce dust and provides special cleaning strength while resisting foreign particles to mix into the tape. A simplified tape advance mechanism resulted in cost reductions for both manufacturing and assembly. The main body is also made from anti-static material.Also made with antistatic materials, the NEOCLEAN-S line of stick type fiber optical connector cleaners controls the generation of static electricity during the cleaning process. And just as with the reel type, the cloth in the cleaning part is made from special cleaning fiber. Featuring 1.25 mm or 2.5 mm ends, NEOCLEAN-S is a very useful tool for cleaning connector end faces inserted into adaptors and housings.Key Features:Compact Design- Easy to Use and EfficientNo Alcohol or SolventsPen, Simple and Stick Types AvailableCost Effective Replaceable Cartridge (NEOCLEAN-E)Excellent Anti-static PropertiesApplications: Cleaning of Single Core and Multi Core Fiber Optical Connectors, Plugs & Adapters; Cleaning of Fiber Optical Connectors for Video Equipment

Viscosity 36,000, 180,000 mPas; Bending Adhesion Strength >114, >128 kgf/cm²; UV Curing Conditions 100 mW/cm², 2 min; Curing Shrinkage Rate 0.5%, 0.9%; Tg +195, +233 °C; Thermal Expansion Coefficient 18, 20 ppm/°CNTT Advanced Technology Corporation’s high-precision optical adhesives allow easy fixation of optical components with sub-micron accuracy. Based on epoxy, these high-precision optical adhesives are available with low viscosity of 36,000 mPas (AT3916P) or with high viscosity of 180,000 mPas (AT3862P). Both adhesives show minimal position changes due to curing time and temperature.Shrinkage rate during curing is very low for this series of high-precision optical adhesives, and the thermal expansion coefficient is small. Using ultraviolet (UV) ray curing makes alignment easy.NTT Advanced Technology Corporation’s series of high-precision adhesives show excellent durability: Even after a high-temperature process at +260 °C, the adhesives’ bonding strength does not change. And no peeling occurred after 200 cycles in a simplified heat cycle test.In order to achieve high reliability, a product must clear the tests conducted by the users themselves. If you have had even just a bit of dissatisfaction in precision or durability results in the past, please put NTT Advanced Technology Corporation’s high-precision adhesives to the test.In case you need any consulting regarding issues related to adhesion, please contact the AMS Technologies optical adhesives experts to discuss the detailed challenges of your application.Key Features:Low Shrinkage Rate During Curing: 0.5% (AT3862P), 0.9% (AT3916P)Low Thermal Expansion Coefficient: <20 ppm/°CUltraviolet (UV) Curing for Easy AlignmentExcellent Durability: No Change in Bonding Strength After +260 °C High-temperature Process, No Peeling After 200 Heat Test CyclesViscosity: 36,000, 180,000 mPasBending Adhesion Strength: >114, >128 kgf/cm²UV Curing Conditions: 100 mW/cm², 2 minGlass Transition Temperature Tg: +195, +233 °CApplications: High-precision Fixation of Optical Components With Sub-micron Accuracy