NOA 61 Optical Adhesive 10g syringe

Refractive Index 1.51; 3500-5500 cps Viscosity at 25°C Norland Optical Adhesive 76 (NOA 76 10g syringe), also known as NOA 76A, is an optically clear, liquid adhesive that will cure when exposed to long wavelength ultraviolet light. It is also sensitive to visible light between 400 - 450 nanometers which will assist in producing faster cures when curing through UV absorbing materials. This one part, moderate viscosity adhesive is 100% solids and offers advantages in optical bonding applications. The use of NOA 76 eliminates premixing, drying or heat curing operations common to other adhesive systems.NOA 76 is recommended for bonding glass to plastic. The adhesive has best adhesion with plastics such as acrylic, polycarbonate and cellulose acetate butyrate with typical applications being glass to plastic bonding or laminating polarized film between glass.Typical Properties of NOA 76 (76A) Color Clear Modulus (psi) 970 Tensile (psi) 450 Elongation at failure 47% Hardness - Shore D 60 Dielectric Constant at 1 MHz 3.33 Dissipation Factor at 1 MHz .0346 Volume Resistivity (ohm/cm 4.723 x 10 to the 12 power Surface Resistivity (Megohms) 2.148 x 10 to the 12 power Dielectric Strength (volts) 131 The shelf life of NOA 76 liquid material is at least 4 months from the date of shipment if kept in a cool (5-22°C) dark place in the original container. If refrigerated, allow the adhesive to come to room temperature prior to use.

 Refractive Index 1.56; 200 cps Viscosity at 25°C Norland Optical Adhesive 71 ("NOA71") is an optically clear, liquid adhesive that will cure when exposed to long wavelength ultraviolet light (10g syringe). The adhesive is a one-part, 100% solids material that offers advantages in bonding applications that require optical clarity or require fast cure times and long term stability over a wide range of temperatures. The use of NOA 71 eliminates premixing, drying, or heat curing operations common to other adhesive systems.NOA 71 was formulated to provide a strong bond to glass surfaces. This adhesive can also be used for adhering to other substrates, such as metal, fiber- glass, and glass filled plastics. Typical applications are laminating solar cells, holographic plates, flat panel displays and touch screens or as a clear coating on plastic or metal.NOA 71 is cured with long wavelength UV light from 315 to 400 nanometers with peak absorption at 365 nm. The amount of energy required for full cure is 3.5 Joules/sq. cm of UV light. Typical Properties of NOA 71 Solids 100% Elongation at Failure 43% Modulus of Elasticity (psi) 55,000 Tensile Strength (psi) 1,300 Hardness - Shore D 86 Dielectric Constant (1 MHz) 4.0 Dielectric Strength (V/mil) 456 The shelf life of NOA 71 liquid is at least 4 months from the date of shipment if kept in a cool (5-22° C), dark place in the original container. If refrigerated, allow the adhesive to come to room temperature prior to use.

Refractive Index 1.6; 155 cps Viscosity at 25°C Norland Optical Adhesive 72 ("NOA72 10g syringe")is an optically clear, liquid adhesive that will cure when exposed to either long wavelength ultraviolet light or visible light. This one part,low viscosity adhesive is 100% solids and offers advantages in optical bonding applications. The use of NOA 72 eliminates premixing, drying or heat curing operations common to other adhesive systems.NOA 72 is recommended for bonding plastics such as acrylic, polycarbonate, cellulose acetate butyrate or glass where low UV light transmission prevents curing of other adhesives. Typical applications would be bonding of compound lenses, laminating polarized film between glass or plastic or bonding leaded glass.NOA 72 is cured by ultraviolet light between 315 to 400 nanometers and visible light between 400 to 450 nanometers. The peak absorption wavelengths are 320, 365 and 420 nm. Full cure requires 5 Joules/sq. cm of energy between 315 and 450 nm.Typical Properties of NOA 72 Hardness - Shore D 75 Dielectric Constant at 1 MHz 3.98 Dielectric Strength (V/mil) 456 Dissipation Factor at 1 MHz .0351 Volume Resistivity (ohm/cm) 7.37 x 10 to the 14 power Surface Resistivity (ohm) 3.73 x 10 to the 12 power Shelf life of the liquid is a minimum of 4 months from the date of shipment, refer to the package label for the actual expiration date, if stored in a cool (5-22° C), dark place in the original container.If refrigerated, allow the adhesive to come to room temperature prior to use.

Refractive Index 1.56; Viscosity at 25°C 300 cps Norland Optical Adhesive 81 ("NOA81") is a single component liquid adhesive that cures in seconds to a tough, hard polymer when exposed to ultraviolet light. It is recommended as an extremely fast and efficient way to precisely bond optical components or fiber optics. It can be cured in a thin layer between two transparent substrates or applied as a dropto form a bridge between two components. Exposure to UV light quickly cures the adhesive and holds the components in place.The outstanding characteristic of this adhesive is its extremely fast cure. Thin films can be initially set in under 10 seconds and thick films in 20 seconds using the light sources listed below. It is also extremely stable when not exposed to UV light. NOA 81 will not gel up in dispenser tips or cure before you want it to.Typical Properties of NOA 81 Solids 100% Elongation at Failure 25% Modulus of Elasticity (psi) 200,000 Tensile Strength (psi) 4,000 Hardness - Shore D 90 Shelf life of the liquid is at least 6 months from the date of shipment if stored in a cool (5-22° C), dark place in the original container. If refrigerated, allow the adhesive to come to room temperature prior to use.

Refractive Index 1.52; 80-95 cps Viscosity at 25°C Norland Optical Adhesive 74(10g syringe) is a clear, colorless, liquid photopolymer that will cure when exposed to ultraviolet light. Since it is a one part system and 100% solids, it offers many advantages in bonding where the adhesive can be exposed to UV light. The use of NOA 74 eliminates premixing, drying or heat curing operations common to other adhesive systems. Curing time is remarkably fast, and is dependent upon the thickness applied and the amount of ultraviolet light energy available.NOA 74 is designed to give the best possible optical bond when using plastic to plastic or plastic to glass substrates. NOA 74 has excellent adhesion to cellulose acetate butyrate (CAB) and glass and good adhesion to CR-39, polarized film, nylon, polycarbonate and acrylics.Typical Properties of NOA 74 Solids 100% Hardness - Shore D 30 Water Absorption (ASTM D 570-63) .0.86%/48H Modulus PSI 2900 Tensile Strength PSI 217 Elongation at failure 10% Shelf life of the liquid is at least 4 months from the date of shipment if stored in a cool (5-20C), dark place in the original container. If refrigerated, allow the adhesive to come to room temperature prior to use.

5 inch Disc; Grit 9 µm; Silicon Carbide; Stainless Steel and Ceramic Ferrule; no PSA The 46P-9-5D fiber optics polishing film from Nanolap comes in a pack that contains 10 pieces.

Refractive Index 1.56; 300 cps Viscosity at 25°C Norland Optical Adhesive 61 is a clear, colorless, liquid photopolymer that will cure when exposed to ultraviolet light. Since it is a one part system and 100% solids, it offers many advantages in bonding where the adhesive can be exposed to U.V. light. The use of NOA 61 eliminates premixing, drying or heat curing operations common to other adhesive systems. Curing time is remarkably fast, and is dependent upon the thickness applied and the amount of ultraviolet light energy available. NOA 61 meets Federal Specification MIL-A-3920 for optical adhesives and is approved for use on all government contracts specifying such adhesives. The adhesive is designed to give the best possible optical bond to glass surfaces, metals, fiberglass and glass filled plastics. NOA 61 is recommended for bonding lenses, prisms and mirrors for military, aerospace and commercial optics as well as for terminating and splicing optical fibers.Typical Properties of NOA 61 Solids 100% Elongation at Failure 38% Modulus of Elasticity (psi) 150,000 Tensile Strength (psi) 3,000 Hardness - Shore D 85 Shelf life of the liquid is at least 4 months from the date of shipment if stored in a cool (50C - 220C), dark place in the original container. If refrigerated, allow the adhesive to come to room temperature prior to use.

All Musashi Engineering syringes are specialized to meet the most severe requirements of precision dispensing operations when utilized with the supplier’s dispenser series. These are high-precision, high-quality, highly reliable parts backed by Musashi Engineering’s well-researched know-how for fluid dispensing. The most important points of Musashi Engineering’s system that put the supplier far ahead of the competition are: high-precision dispensing (thanks to superior fluid handling characteristics); Musashi Engineering’s unique system for creating smooth piston movement; and the supplier’s straight wall design that eliminates jerky plunger movements. These advantages allow Musashi Engineering to improve dispensing quality and dispensing efficiency, while letting customers save money. The broad portfolio of syringes ranges from clear and UV-block and colour syringes in various sizes, heat-resistant and mounter-specific versions as well as antistatic and stainless steel syringe sets. Available accessories for syringes are adapter tubes with stopper and partly clamp, air connector tube with filter, O-rings for adapter tubes, plungers and head or tip caps. Key Features: Clear Syringes, 1 to 100 ml UV-block Syringes, 3 to 70 ml Color Syringes, 5 to 50 ml Heat-resistant Syringes, +130 °C or +180 °C, 30 ml Mounter-specific Syringe, 20 ml Antistatic Syringe Set, 10 to 40 ml Stainless Steel Syringe Set, 1 to 50 ml 1 m Adapter Tube With Stopper, for 1 to 100 ml Syringes 1 m Adapter Tube With Stopper and Clamp, for 3 to 70 ml Syringes 1 m Adapter Tube for Plastic Connector With Stopper, for 3 to 70 ml Syringes 1 m Side Connection Adapter Tube With Stopper for 5 to 70 ml Syringes 150 mm Air Connector Tube With Filter O-ring for Adapter Tube, for 1 to 100 ml Syringes Plungers in Several Colours, High-speed, High-precision and Special Wiping Types, for 1 to 70 ml Syringes Syringe Head Caps, for 1 to 100 ml Syringes Syringe Tip Caps, Normal and Knurled Type, Common for all Syringe Sizes Applications: Fluid Control for Dispensing Devices, Meeting Most Severe Requirements of Precision Dispensing Operations