EOPC Photodiode Chips

Product number: SW11568

Manufacturer: EPIGAP OSA Photonics

Product information "EOPC Photodiode Chips"

525-1300 nm; Visible, IR; Active Area 0.071-2.32 mm²; Responsivity 0.08-1 A/W; Dark Current 0.005-20 nA

A selection of photodiode chips with sensitivities in the visible and infrared spectral range is available for customer-specific designs. Low dark current, reliability and high sensitivity are the advantages of these products.

The EOPC series includes GaP, Si, InGaAs and AlGaAs photodiode chips. For more standard applications, EPIGAP Optronic’s photodiode components are also available housed in molded plastic, hermetic TO and SMD packages (EOPD series) with high degradation stability and good matching with LEDS.

The supplier’s diversity of chips in terms of wavelength, chip size and polarity allows the selection and adaptation to the specificity of the application. Please contact the AMS Technologies photodiode experts to find the right solution that meets your design project’s requirements. We would like to support you and look forward to your inquiries!

Key Features:

Product

Max. Sensitivity

Package

Active Area

Responsivity

Dark Current

Downloads

EOPC-525-0.86

525 nm

0.57 mm2

0.08 A/W

5 pA

Datasheet

EOPC-880-0.9-1

880 nm

0.72 mm2

0.25 A/W

1 nA

Datasheet

EOPC-940-1.5

940 nm

2.32 mm2

0.6 A/W

8 nA

Datasheet

EOPC-940-0.1

940 nm

0.1 mm2

0.6 A/W

0.05 nA

Datasheet

EOPC-1300-0.3

1300 nm

0.071 mm2

1 A/W

0.3 nA

Datasheet

EOPC-1300-1.0

1300 nm

0.785 mm2

0.95 A/W

20 nA

Datasheet

Applications: Optical Communications; Safety Equipment; Light Barriers; Colorimeters; Currency Authentication; Spectroscopy Equipment; Fluorescence; Optical Power Monitor PD

Manufacturer "EPIGAP OSA Photonics"

Similar products

1064 nm Long-wavelength Enhanced Silicon Avalanche Photodiodes APD

Active Area Diameter 0.8-3 mm; Responsivity 25-36 A/W; Capacitance 2-10 pF; NEP 14-20 fW/√Hz; Dark Current 50, 100 nA; Package TO-5, TO-8 Excelitas’ 1064 nm long-wavelength enhanced Silicon Avalanche Photodiodes (APDs) C30954EH, C30955EH and C30956EH are made using a double-diffused “reach-through” structure. The design of these photodiodes is such that their long-wave response (i.e. >900 nm) has been enhanced without introducing any undesirable properties. The C30954EH, C30955EH and C30956EH long-wavelength enhanced APDs have quantum efficiency of up to 40 % at 1060 nm. At the same time, the diodes retain the low-noise, low-capacitance, and fast rise and fall times characteristics. To help simplify many design needs, these APDs are also available in Excelitas’ high-performance hybrid preamplifier module type C30659 series, as well as the preamplifier and TE cooler incorporated module type LLAM series. In addition, these APDs are also available with built-in thermo-electric cooler for easier temperature control. The C30954EH long-wavelength enhanced silicon avalanche photodiode (Si APD) provides a 0.8 mm active area diameter in a TO-5 package. The C30955EH long-wavelength enhanced silicon avalanche photodiode (Si APD) provides a 1.5 mm active area diameter in a TO-5 package. The C30956EH large-area, long-wavelength enhanced silicon avalanche Photodiode (Si APD) provides a 3 mm active area diameter in a TO-8 package. Key Features: Active Area Diameter: 0.8, 1.5, 3 mm High Quantum Efficiency at 1060 nm: ≤40% Enhanced Long-wave Response: >900 nm Fast Response Time: 2 ns Wide Operating Temperature Range Low Capacitance @100 kHz: 2 to 10 pF Responsivity @1060 nm: 25 to 36 A/W Dark Current: 50, 100 nA Spectral Noise Current: 0.5 pA/√Hz NEP @1060 nm: 14 to 20 fW/√Hz Vop Range: 275 to 425 V Hermetically Sealed Packages: TO-5, TO-8 RoHS Compliant TEC Option Available Customization Available Upon Request Applications: Range Finding; LiDAR (Light Detection and Ranging); YAG Laser Detection

Product number: SW11551

Manufacturer:

4X4D Two-dimensional Silicon Array Detectors

4x4 Array Detector; 810, 850 nm Band Optimized; Active Area 1,0, 1.96 mm2; Responsivity 0.35 to 0.4 A/W; Capacitance 35, 75 pF; Package Ceramic LCC OSI Optoelectronics’ 4X4D series comprise 4 by 4 arrays of super blue enhanced photodetectors. Two models are available: PIN-4X4D silicon array detectors feature an active area of 1.96 mm2 and a peak responsivity wavelength of 850 nm, while UDT-4X4D silicon array detectors with an active area of 1.0 mm2 show peak responsivity at 810 nm. OSI Optoelectronics’ proprietary design provides virtually complete isolation between all of the 16 elements. The standard LCC package allows easy integration into your surface mount applications. Numerous applications include ratio and scattering measurements, as well as Position Sensing. For custom packages, special electro-optic requirements, or to order these parts in die form, please contact AMS Technologies. Key Features: 4x4 Array Detector Active Area: 1.0x1.0 mm (UDT-4X4D), 1.4x1.4 mm (PIN-4X4D) Peak Responsivity Wavelength: 810 (UDT-4X4D), 850 nm (PIN-4X4D) Very Fast Response Extremely Low Cross-talk Surface Mount Design Package: Ceramic LCC Applications: Ratio and Scattering Measurements; Position Sensing

Product number: SW11021

Manufacturer:

A2C-16-1.57 Multi-channel X-Ray Detector

540, 930 nm Band Optimized; 16 Elements; Active Area 2.35 mm2 per Element; AA Dimensions 2.00 x 1.18 mm per Element, Pitch 1.57 mm; Rise Time 0.1 µs; Responsivity 0.31, 0.59 A/W; Capacitance 28 pF; Package Special PCB OSI Optoelectronics' A2C-16-1.57 multi-channel X-ray detector consists 16 individual elements grouped together in an array and mounted on PCB. For X-ray or gamma-ray application, these multi-channel detectors offer scintillator-mounting options: BGO, CdWO4 or CsI(TI). BGO (Bismuth Germanate) acts as an ideal absorber: it is widely accepted in high-energy detection applications. CdWO4 (Cadmium Tungstate) exhibits sufficiently high light output, helping improve spectrometry results. CsI (Cesium Iodide) is another high energy absorber, providing adequate resistance against mechanical shock and thermal stress. When coupled to scintillators, these silicon arrays map any medium or high radiation energy over to visible spectrum via scattering effect. Also, their specially designed PCB allows end-to-end connectivity. Multiple arrays can be deployed in situations that call for larger scale assembly. Key Features: Scintillator Platform 5 V Bias Channel Spacing Variety Applications: Position Sensors; Multi-channel Gamma Counting; X-ray Security Systems

Product number: SW11074

Manufacturer:

Ambient Light Sensors

Active Area 0.191-37.7 mm²; Radiometric Sensitivity 0.034-7 A/W; Capacitance 0.15-11 nF; Spectral Range 330-720 nm; Typ. Peak Wavelength 555, 580, 585 nm; NEP 11, 13, 53 fW/√Hz; Max. Dark Current 0.02-50 nA; Package TO-8, TO-46, T-1¾ Flat Excelitas offers ambient light sensors that provide an easy solution for applications requiring a response similar to the human eye, making them ideal when the response should only be influenced by visible light. Within this product family, we offer two types of Excelitas devices: IR-filtered silicon photodiodes and IR-filtered silicon phototransistors. These devices contribute in various applications to energy conservation in both fixed and portable devices. They are available in a number of standard packages, including surface mount for automated assembly. Applications: Interior and Exterior Light Switching (Dusk/Dawn Switch); Interior and Exterior Light Control (Dimming); Automotive Headlight Dimmer; Display Contrast Control; Energy Conservation

Product number: SW11560

Manufacturer:

APD Silicon Avalanche Photodiodes

800 nm Band Optimized; Active Area 0.03 to 19.6 mm2; AA Dia. 0.2 to 5.0 mm; Responsivity 20 to 50 A/W; Capacitance 1.5 to 105 pF; Package TO-5, TO-8, TO-52 OSI Optoelectronics’ APD series of silicon avalanche photodiodes make use of internal multiplication to achieve gain due to impact ionization. The result is this optimized series of high responsivity devices, exhibiting excellent sensitivity. OSI Optoelectronics offers several sizes of detectors that are available with flat windows or ball lenses for optical fiber applications. Optimized for the 800 nm wavelength band, the APD series is available with five different active area sizes ranging from 0.2 to 5.0 mm in diameter. Depending on active area size, the devices are supplied in TO-5, TO-8 or TO-52 packages. Key Features: High Speed Responsivity / QE High Bandwidth / Fast Response Low Noise Low Bias Voltage Hermetically Sealed TO-Packages Applications: High Speed Optical Communications; Laser Range Finders; Bar Code Readers; Optical Remote Control; Medical Equipment; High Speed Photometry

Product number: SW11018

Manufacturer:

APDXX-8-150 Silicon Avalanche Photodiodes

800 nm Band Optimized; Active Area 0.003 to 1.77 mm2; AA Dia. 0.2 to 1.5 mm; Responsivity 50 A/W; Capacitance 1.5 to 10 pF; Package TO-5, TO-52 OSI Optoelectronics introduces its APDXX-8-150 “800 nm optimized” silicon avalanche photodiode (APD) series, available in hermetic metal packages. Devices offer lower noise and high sensitivity over bandwidths up to 1 GHz. APDXX-8-150 devices exhibit a low temperature coefficient of 0.45 V/˚C. OSI Optoelectronics’ APD series of silicon avalanche photodiodes make use of internal multiplication to achieve gain due to impact ionization. The result is this optimized series of high responsivity devices, exhibiting excellent sensitivity. The APDXX-8-150 series is available with different active area sizes ranging from 0.2 to 1.5 mm in diameter as well as with flat windows or ball lenses for optical fiber applications. Depending on active area size, the devices are supplied in TO-5, or TO-52 packages. Key Features: Active Area Diameters: 0.2, 0.5, 1.0, 1.5 mm Low Temperature Coefficient: 0.45 V/°C High Sensitivity Low Noise High Bandwidth Applications: Optical Fiber Communication; Laser Range Finder; High-speed Photometry

Product number: SW11047

Manufacturer:

Avalanche Photodiode APD Arrays & Quadrants

C30927 Series: Number of Elements 4; Photo Sensitive Diameter 1.5 mm; Responsivity 15-62 A/W; Capacitance 1 pF; NEP 9-16 fW/√Hz; Spectral Noise Current per Element 0.5 pA/√Hz Excelitas’ C30927 family of avalanche photodiode (APD) arrays and quadrants utilize the double-diffused “reach-through“ structure. This structure provides ultra-high sensitivity at 400 nm to 1000 nm. The C30927 quadrant structure has a common avalanche junction, with separation of the quadrants achieved by segmentation of the light entry p+ surface opposite the junction. With this design, there is no dead space between the elements and therefore no loss of response at boresight. The C30927EH-01, -02 and -03 APD arrays and quadrants are optimized for use at wavelengths of 1060, 900, and 800 nm respectively. Each device type will provide high responsivity and excellent performance when operated within about 50 nm of the specified wavelength. The C30985E is a 25-element silicon avalanche photodiode (Si APD) consisting of a double diffused “reach-through” structure. The standard versions of the Excelitas C30737 silicon APD array series are available with 16 or 64 elements and provide high responsivity between 500 nm and 1000nm. The standard versions are available either in a compact surface-mount “top-looking” leadless package (C30737MA) or in a BGA type “top-looking” package (C30737GA). Both packages are ideally suited for high volume, cost-effective applications where a high gain APD is required. The leadless SMD and BGA packaged parts are RoHS-compliant and suitable for reflow soldering. The C30737MH series of LLC SMD packaged EPI APDs has the smallest footprint SMD packages. The C30737GA-02-64-90 silicon avalanche photodiode array (Si APD array) provides high responsivity between 500 nm and 1000 nm and is available in a BGA-type “top-looking” package. The C30737GA is ideally suited for high volume, cost-effective applications where a high gain APD is required. Its leadless BGA package is RoHS-compliant and suitable for reflow soldering. Key Features C30927 Series: High Quantum Efficiency Hermetically Sealed Packages Monolithic Chip With Minimal Dead Space Between Elements Specific Tailored Wavelength Response RoHS Compliant Customization Available Upon Request Applications C30927 Series: Spectroscopy; Particle Detection; Spot Tracking and Alignment Systems; Adaptive Optics; LiDAR (Light Detection and Ranging)

Product number: SW11549

Manufacturer:

Customers also viewed

Accessories for LED Light Sources

Accessories for Mightex LED light sources comprise lightguide collimators, dedicated focusing modules for collimated LED light sources, various cables, fiber-optic adapters, microscope illumination tubes, connector tubes for LCS-Series light sources, a thread converter, empty filter/optics holders, a lightguide holder for converting Type-B LCS into Type-B GCS as well as accessories for beam combiners like a push-pull adjustable mount, a 11 mm LCS adapter or connecting plates. Four different lightguide collimators are used to either couple light from free space into a lightguide or collimate light from a lightguide to form a collimated (parallel) optical beam. Lightguide collimators are key components with numerous applications. For example, a lightguide collimator can project light from a lightguide into a uniform spot in free space. High-numerical-aperture aspherical lenses are used for precise collimation and maximum light throughput. The collimators feature adjustable focus from ~100 mm to infinity. Various lightguide ferrule diameters are supported. Customization is available for other ferrule diameters. For further details, please refer to the downloadable datasheet and the downloadable “Accessories for LED Light Sources Overview”. Six different ACC-LCS-F-xx focusing modules for collimated LED light sources are available, comprising modules for 11 to 48 mm clear-aperture collimated LED light sources with working distances from 5 to 100 mm. For details, please refer to the downloadable “Accessories for LED Light Sources Overview” and the downloadable installation drawings. Four different cables are available for FCS-, FFC-, GCS-, WFC- and WLS-Series LED light sources. Some cables feature push-pull connectors and/or are suitable for 4-channel light sources. For details, please refer to the downloadable “Accessories for LED Light Sources Overview”. A LCS-FPC-ADP-SMA fiber-optic adapter can be used to couple light from a LCS-Series collimated LED light source (22-mm aperture) into a fiber patchcord and accepts SMA connectorized fiber patchcords. Three different ACC-BC25-MIT-xxx microscope illumination tubes allow to couple a beam combiner or LCS-Series collimated LED light source into the infinity optical path of microscopes. The lengths of these microsope illumination tubes are designed for one beam-combiner distance (up to two LCS sources) or two beam-combiner distances (up to four LCS sources). For details, please refer to the downloadable installation drawing. Three different ACC-LCS-xxx connector tubes for LCS-Series collimated LED light sources are available, comprising a male-to-male C-mount connector with inner threads, a female-to-female C-mount connector with outer threads and a 15 mm extension tube for 22 mm clear-aperture LCS-Series light sources. For details, please refer to the downloadable “Accessories for LED Light Sources Overview”. An ACC-LCS-27C adapter is available for converting M27 thread to C-thread. Two different empty filter/optics holders for 22 mm clear-aperture collimated LED light sources are available (ACC-LCS-H-22, ACC-LCS-EH). Both are excitation filter holders for 25.4 mm (1”) diameter filters with up to 5 mm thickness, with ACC-LCS-EH featuring a threaded output end to connect to Mightex LCS-LGA22-xxx lightguide adapters or ACC-BC25-xxx microscope adapters. For details, please refer to the downloadable “Accessories for LED Light Sources Overview” and the downloadable installation drawing. Mightex’s GCS-LGH-B-0515 lightguide holder is used to replace the collimating lens on a Type-B LCS in order to convert it to a Type-B GCS. This holder is suitable for lightguides with a ferrule diameter of 5 mm (typical 3-mm-core lightguides) and a ferrule length of 15 mm or greater. Mightex’s ACC-LCS-BC25-PPM push-pull mount for multi-wavelength beam combiners is user-adjustable. Currently, Mightex’s multi-wavelength beam combiners can only be used to directly combine 22-mm-diameter collimated LED light sources. For 11-mm-diameter collimated LED light sources, an ACC-BC25-011 mechanical adapter can be used to attach the LED sources to the beam combiners, before the 11-mm-diameter collimated LED sources can be combined. Three different ACC-BC25-CP-01/02/03 connecting plates are available to connect two or more multi-wavelength beam combiners together, with four screws included. For details, please refer to the downloadable “Accessories for LED Light Sources Overview” and the downloadable product overview.

Product number: SW11232

Manufacturer:

Ox-SAC-08 Diamond Angled Fiber Cleaver

Manual Angled Cleaver; Fiber Type SM, PM; Fiber Diameter 125 µm; Buffer Diameter 250-900 µm; Cleave Angle 8° (±2°); Min. Cleave Length 8 mm Oxford Fiber’s Ox-SAC-08 is the world’s simplest angled cleaver. The single mode (SM) or polarization maintaining (PM) fiber is clamped under rubber rings at two points and bent down onto a sharp diamond blade. The optical fiber is cleaved so that its single mode or polarization maintaining core is at an angle of 8° from perpendicular. This way, the back-reflection from the cleaved end facet is is reduced to <-60dB, avoiding optical noise in telecom systems or eliminating reflections in fiber sensor arrays. If you require a cleaver for any other fiber type or a custom cleaver tailored to your specifications, please get in touch with the AMS Technologies fiber cleaving experts. Key Features: Staple Action for Easy Use Rugged Construction for Field Use 10 Position Diamond Bladed for Extended Life Blade Life: >10,000 Fibers Cleaved (Estimated) Benchtop and Handheld Operation Easy Fiber Loading Using Detachable Fiber Holder Compatible with Angled Mechanical Splice Offcut Bin, Tool Catch & Case Fiber Diameter: 125 μm SM or PM Buffer Diameter: 250 µm to 900 μm Cleave Angle: 8° (±2°) Dimensions (max): 67 mm x 40 mm x 79 mm Weight: 170 g Minimum Cleave Length: 8 mm – Set by Fiber Holder Applications: Mechanical Field-installed Connectors; Pigtailing Fiber to Semiconductor Emitters and Detectors; Removing End-reflections in Fiber-optic Sensing Applications

Product number: SW11777

Manufacturer:

4X4D Two-dimensional Silicon Array Detectors

Product number: SW11021

Manufacturer:

EOLD-xxxx-0xx Hermetic TO LEDs

255-1720 nm; UV, Visible, IR; Radiant Power 0.8-8 mW; Viewing Angle 6°-114°; Package TO-05, TO-18, TO-39, TO-46 With the EOLD-xxxx-0xx series, EPIGAP Optronic provides a variety of different LEDs in hermetic TO cases as standard products, featuring high efficiency and degradation stability. TO metal case options with TO‐05, TO‐18, TO‐39 or TO‐46 package are available, equipped with flat window cap or lens cap. The package, lens shapes, viewing angle and wavelength in the range from 255 nm (UV) to 1750 nm (infrared) can be adapted to the application. EPIGAP Optronic manufactures samples and series for standard LEDs and customer-specific components according to your specifications. If you should not see the exact configuration that meets your design project’s requirements, please contact the AMS Technologies LED experts to find the right standard or customized product. EPIGAP Optronic’s LED components are also available in molded plastic cases (EOLD-xxxx-3xx/5xx series) and SMD packages (EOLS series) as well as bare LED chips (EOLC series) with high efficiency and very good degradation stability. The supplier’s variety of chips in terms of wavelength, chip size and polarity allow for the selection and adaptation to the requirements of your application. The portfolio includes special chips like EOLC-xxx-19-xx point source LED chips or EODC-660-19-xx monolithic LED display chips for optical systems. Key Features: Product Wavelength Package Luminous Intensity Radiant Power Viewing Angle Downloads EOLD-255-092 255 nm TO-46 1.25 mW 100° Datasheet EOLD-255-012 255 nm TO-46 1 mW 6° Datasheet EOLD-265-092 265 nm TO-46 1.35 mW 100° Datasheet EOLD-265-012 265 nm TO-46 1.1 mW 6° Datasheet EOLD-275-092 275 nm TO-46 2.2 mW 100° Datasheet EOLD-275-012 275 nm TO-46 1.6 mW 6° Datasheet EOLD-310-013 310 nm TO-46 0.9 mW 6° Datasheet EOLD-310-023 310 nm TO-18 1.2 mW 24° Datasheet EOLD-310-043 310 nm TO-18 1.2 mW 40° Datasheet EOLD-310-093 310 nm TO-18 1.2 mW 113° Datasheet EOLD-310-093-1 310 nm TO-5 1.5 mW 114° Datasheet EOLD-310-013-6 310 nm TO-5 0.8 mW 6° Datasheet EOLD-325-013 325 nm TO-46 1 mW 6° Datasheet EOLD-325-023 325 nm TO-18 1.5 mW 24° Datasheet EOLD-325-043 325 nm TO-18 1.4 mW 40° Datasheet EOLD-325-093 325 nm TO-18 1.2 mW 113° Datasheet EOLD-325-093-1 325 nm TO-39 1.7 mW 114° Datasheet EOLD-325-013-6 325 nm TO-5 1 mW 6° Datasheet EOLD-340-013 340 nm TO-46 0.9 mW 6° Datasheet EOLD-340-023 340 nm TO-18 1.3 mW 24° Datasheet EOLD-340-043 340 nm TO-18 1.3 mW 40° Datasheet EOLD-340-093 340 nm TO-18 1.3 mW 113° Datasheet EOLD-340-093-1 340 nm TO-5 1.7 mW 114° Datasheet EOLD-340-013-6 340 nm TO-5 1 mW 6° Datasheet EOLD-365-012 365 nm TO-18 1.5 mW 10° Datasheet EOLD-365-092 365 nm TO-18 1.5 mW 90° Datasheet EOLD-370-012 370 nm TO-46 1.5 mW 10° Datasheet EOLD-460-013 460 nm TO-46 16000 mcd 8 mW 10° Datasheet EOLD-470-013-2 470 nm TO-46 4 mW 12° Datasheet EOLD-810-095-4 810 nm TO-46 2.2 mW 90° Datasheet EOLD-880-015-1 880 nm TO-46 1.8 mW 6° Datasheet EOLD-940-015 940 nm TO-46 5 mW 6° Datasheet EOLD-1050-015 1050 nm TO-46 1.6 mW 6° Datasheet EOLD-1050-095 1050 nm TO-46 5 mW 40° Datasheet EOLD-1060-015 1060 nm TO-46 1.6 mW 6° Datasheet EOLD-1200-015 1200 nm TO-46 1.5 mW 6° Datasheet EOLD-1200-095 1200 nm TO-46 1.5 mW 50° Datasheet EOLD-1300-015 1300 nm TO-46 1.6 mW 6° Datasheet EOLD-1300-095 1300 nm TO-46 1.6 mW 50° Datasheet EOLD-1450-015 1450 nm TO-46 1.5 mW 6° Datasheet EOLD-1650-015 1650 nm TO-46 1 mW 6° Datasheet EOLD-1720-015 1720 nm TO-46 1 mW 6° Datasheet EOLD-1720-095 1720 nm TO-46 1 mW 50° Datasheet Applications: Industrial Sensors; Automation; Security and Safety Technology; Diagnostics; Biomedical Technology; Medical Imaging; Analytical Instruments; Scientific Analysis; Photo Catalyst; Medical Phototherapy; UV Curing; UV Sterilization

Product number: SW11562

Manufacturer: