P300 Recirculating Chillers

Cooling Capacity 400-800 W @+25 °C; Process Fluid Flow Rate 4 lpm @1 bar; CPC 1/4” Fittings; Temperature Stability ≤±0.1 K; Heating Capacity 150, 200 W Termotek’s miko series of miniature recirculating chillers is one of the smallest compressor cooling systems currently available on the market – available as plug-in unit or stand-alone solution. Although its compact dimensions, the miko chiller series offers an extremely high power density and temperature stability of +/- 0.1 K. The mini-tower version miko p10035 measures just 350 x 200 x 330 mm and delivers a refrigeration capacity of up to 400 W, depending on ambient conditions. The plug-in rack versions deliver between 400 and 800 W with a height of just 3 or 4 RU (rack units). miko features 24 V miniature compressors which are on a par with the large versions on a 230 V basis and also include a speed control unit. This power density means that miko offers an attractive and efficient alternative to Peltier coolers, including for high ambient temperatures. Both the plug-in and stand-alone units in the miko series are noise- and vibration-reduced. Key Features: Speed-controlled Miniature Compressor Robust Desktop or Tower Design Space-saving, Modular Design Principle Reduced Noise and Vibrations Temperature Stability: ≤0.1 K Direct Cooling as an Optional Feature Pump Capacity: 4 l/min @1 bar 24 VDC Technology Inside Customizable Optimized for Medical and Laboratory Applications Efficient Alternative to Peltier Cooling Dimensions: 350 x 200 x 330 mm (Desktop Tower Version), 19”, 3 or 4 HU (Plug-in Rack Version) Applications: Stable and Precise Cooling Processes in Medical, Laboratory and Analytical Applications

Non-latching; 1x2, 2x2, 1x4, 1x8; Fiber Type SM, MM; 1240 to 1650 nm; Insertion Loss 1.0 to 2.0 dB; Crosstalk 50 dB; Switching Time 1 ms Sercalo Microtechnology’s BS series are all optical switch solutions for demanding applications in fiber optic instrumentation or communication. The benchtop instrument can switch up to two input fibers to any of up to eight output fibers, independently of data format, wavelength or optical power. The BS series optical switches are available either for single mode (SM) or multi mode (MM) fibers. The optical connections are set by a MEMS based switch network, where micromachined silicon mirrors redirect light to the selected ports. The use of MEMS technology offers solid state reliability together with long term stability and robustness for stable operation. The switch is controlled over an USB connection which also acts as power supply. BS series switches are built using Sercalo Microtechnology’s Telcordia-qualified MEMS technology, which achieves superior reliability and repeatability when compared to traditional mechanical solutions. The switches are fully bi-directional and transparent to the full wavelength range of the installed fiber. When several input fibers are required, the switch architecture can be either blocking or non-blocking. In the blocking architecture when one input is set, the other inputs can only be set to a limited number of “free” ports. In the non-blocking architecture there is no such limitation. Any of the input ports can go to any of the free output ports. But the complexity of the non-blocking architecture is much higher. Key Features: Reliable Low Insertion Loss: Superior Repeatability Single Mode (SM) or Multi Mode (MM) Fibers CE Compliant Applications: Fiber Optic Telecom and Datacom; Fiber Optic Test and Measurement

Cooling Capacity 1-15 kW @+20 °C; Process Fluid Flow Rate 3-30 lpm @≤8.5 bar; 3/8”, 1/2”, 3/4”, 1” Fittings; Temperature Stability ±0.1-±0.5 K Termotek’s P800 series of stand-alone cooling units for optimum ratio of dimensions and performance are used wherever there is a need for precise cooling and the need to avoid integrating the refrigeration unit in a separate machine housing. High performance in a space-saving, mobile housing – this has proved to be a tried-and-trusted combination over many years in all fields of laser cooling, including optical assemblies, in laboratories, in the printing industry and on machine tools and for HSC milling. The practical arrangement of all the components in the compact housing means not only low maintenance requirements but low vibrations and noise emissions too. The P800 recirculating chillers are available for power ranges from 1 to 15 kW. P800 chillers provide active cooling and therefore contain a refrigeration circuit with a compressor and a heat exchanger for a variety of media. Both the refrigeration circuit and the cold water temperature are monitored and controlled by a central control system. The cold water is reliably fed to where it is required by a pump. An optional particle filter in the cold water outlet keeps the circuit clean, and a flow sensor for the return flow guarantees the required stable operation. The waste heat is either emitted to the environment via speed-controlled fans or transferred to a central water circuit via heat exchangers, so that the waste heat can be used, for example, for preheating the process water. Key Features: Compact, Stand-alone Enclosure Compact and Flexible in Terms of Installation Small Footprint - Excellent Cooling Power to Size Ratio Extremely High Level of Temperature Stability: ±0.1 to ±0.5 K Reliable Operation Low Noise and Vibration Levels Low Maintenance Requirements Small Water Tank Cooling Capacity 1 to 15 kW Flow Rate: 3 to 30 l/min and More on Demand Designed for Water With Additions or De-ionized Water Alarm Dry Contacts via 9-pole Sub-D on Rear Panel Water Level Display Speed-controlled Fan RS232 Interface Remote Start Via 24 VDC Signal 50/60 Hz Design Refrigerant: R134a Applications: Cooling of Lasers (CO2, Passively Cooled Lasers, Fiber Lasers); Cooling of Medical and Laboratory Equipment; Printing Industry; HSC Spindles; Tooling Machines; Laboratories; Optical Assemblies

Motor, pump, 1/2 hp, 115/230 VAC, 1 ph, 50/60 Hz, 4.3 gpm. The 230-0203 replacement motor fits to following chillers and cooling systems: Lytron Kodiak chillers: RC011, RC022, RC030, RC045 Lytron Modular Cooling System: MCS50