mRC-C-450-100/240 mini Recirculating Chiller

HeNe Laser Head 1122 Series

Copper fin, stub-end, 840 W, maximum pressure 150 psi. Aavid-Boyd's (formerly Lytron's) stainless steel Aspen® heat exchanger combines low price and low pressure drop with excellent heat transfer and superior fluid integrity. These heat exchangers are ideal for applications where deionized water or corrosive fluids are used.  When a slightly lower performance/size ratio is acceptable, the Aspen offers better value.

Vapor Compression Chiller; 1000 W @+35°C (amb)/+25°C (water); Flow Rate 5.5 lpm @ 0.5 bar, Temperature Stability ≥±0.05 K at constant load; Power Supply 90-264 VAC Key Features: Recirculating Water Chiller Easy to be Integrated in Customer Application User-Definable PID Parameters and Fan Velocity Silent Operation with Low Vibration and Noise Ideal for Water Cooling Tasks up to 1000 W Customizable booster cooling capacity IoT Ready as an Option: Remote Operation, Monitoring and Service over Integrated Ethernet Interface Depending on the temperatures of coolant (water) and ambient, AMS Technologies’ mRC-C-1000-100/240 recirculating chiller provides approximately 1000 W (Twater = +25°C, Tambient = +35°C) in silent mode boostable to higher cooling capacities with higher fan speeds. The chiller contains a compressor-based refrigerant circuit as well as a closed, recirculating coolant (water) circuit. Due to its speed-controlled compressor, the mRC-C-1000-100/240 recirculating chiller offers low vibration and noise throughout the compressor’s BLDC speed range. The system’s features include global operability due to a universal 90 to 264 VAC power supply, as well as an optional integrated Ethernet interface allowing remote operation, monitoring and service. Further options are a gear pump providing 5 bar @5 l/min, CPC inlet and/or outlet fittings, external coolant filters or dust filters, and a hardware set for 19” rack mount (6U). For lower heat loads, we also carry a mRC-C-450-100/240 mini Recirculating Chiller with up to 450 W cooling capacity. Specifications: Cooling Capacity: nominal 1 kW (Twater = +25 °C, Tambient = +35 °C) Temperature Stability: +-0.05°C at constant load Available Pressure Head: 0.5 bar @ 5.5 lpm (standard), 5 bar @ 5 lpm (optional) Control: Local, RS232, IoT Ready, Interlock Power Supply: 90 to 264 VAC, 24 VDC Derivative for OEM integrations available on Demand Power Consumption: <750 W Options: 19” Rack Mount (6U); Ethernet / IoT Ready; Optional Pumps; CPC Inlet/Outlet Fittings; External Coolant Filters; External Dust Filters; Green Version Based on Propane (R290) as Refrigerant Dimensions: 443 x 283 x 675 mm, Main Body Without Filter Approval: CE (in process) Applications: Water Cooling of Lasers and Other Applications with up to 1000 W Heat Load

Peltier Cooling Assembly Kit; Cooling Capacity 130 W @+25°C; with Detachable Carrier Plate; Power Supply 24 VDC Key Features: Ideal for Precise Cooling of Medical and Industrial Lasers Efficient Peltier System, no Liquids, no Moving Parts (Except Fans) Allows for Excellent Temperature Stability Low Vibration, Low Noise Lightweight, Very Compact Easy to Integrate The compact mDC-T-130-24-KIT thermoelectric plate-to-air cooling kit was developed for precise temperature control of laser diode modules and direct heat transfer to the ambient air. The highly efficient, solid state mini direct cooling system reaches a cooling capacity of 130 W for 24 VDC supply voltage and +25°C on laser mounting plate and +25 °C ambient temperature. The mDC-T-130-24-KIT Peltier cooling assembly kit comes with a 108 mm x 108 mm mounting plate that can be removed without the need to dismantle the Peltier assembly and can be worked on, i.e. individual mounting patterns can be drilled by the customer. The kit comes with graphite foil and screws pre-mounted. The Peltier modules can be configured for either 12 or 24 VDC. Depending on cooling requirements, the 60 x 60 mm fans' speed can be reduced for quiet operation. We also carry a large range of suitable temperature controllers that can be found here. If your application requires higher cooling capacities, take a look at our mRC-C-450-100/240 mini Recirculating Chiller and our liquid cooling solutions offerings – or browse our large portfolio of liquid to air temperature management assemblies. Your customized direct cooler: AMS Technologies’ thermal management specialists are happy to develop a direct cooling solution tailored to your needs – based on Peltier or compressor technology – and offer all services from development and proof-of concept to series production. Get in touch with us now to discuss your customized direct cooler.  Specifications: Nominal Cooling Capacity: 130 W (@+25°C Ambient, +25°C Mounting Plate (Bottom)) Power Consumption per Fan (Manufacturer’s Data): 6 W Max. Noise (Manufacturer’s Data): 49 dB(A) Coefficient of Performance (COP): 0.57  Applications: Direct Cooling and Precise Temperature Control of Laser Diode Modules With Power Dissipation of up to 130 W  

Refractive Index 1.315; 15 cps Viscosity at 25°CNorland Optical Adhesive 1315 is clear liquid adhesive that will cure when exposed long wavelength ultraviolet light. NOA 1315 is recommended for bonding for glass to glass. Adhesion is also good to cellulose acetate butyrate. NOA 1315 is cured by ultraviolet light between 320 to 450 nm. Full cure requires 6 Joules/cm 2. The adhesive exhibits oxygen inhibition when used exposed to air. To overcome this the adhesive must be cured under an inert atmosphere, such as nitrogen. When used as a coating the liquid adhesive's temperature must be kept below 9C to prevent vaporization.Typical Properties of NOA 1315Temperature Range-15°C to 90°CKeep NOA 1315 in a cool ( 5 to 20°C) dark place. If refrigerated, allow the adhesive to come to room temperature before using.

Rotary Mini Compressor 2.4cc, 24VDC/ Electr. Controller / Mount. Kit incl. Inverter board Cooling Capacity of up to 500 W  Low Vibration of <20µm Low Noise of <42dBA

405-976 nm; Output Power 0.002-12 W; Fiber Core Diameter 4-400 µm; Fiber NA 0.13, 0.14, 0.22 BWT provides a broad range of single-emitter diode lasers with wavelengths from 405 nm to 97 6nm and output powers from 2 mW to 12 W. Variants with wavelengths in the area of 9xx nm (915 nm to 976 nm) are especially suited for pumping of fiber lasers and solid state lasers. Further areas of applications are computer to plate (CTP) printing, medical, aiming beam, industry and others. BWT’s high-power diode laser modules are manufactured by adopting specialized fiber coupling techniques. Using special micro optics, the asymmetric radiation from the laser diode chip is transferred into an output fiber with small core diameter. The result are volume products with a high efficiency, stability and superior beam quality. Inspecting and burn-in procedures guarantee each product with reliability, stability and long lifetime. For customer-specific applications, varieties of packages as well as optional functions like aiming beam, photo detector, TEC, fiber detector, thermistor and other functions are available. Contact the AMS Technologies diode laser experts to discuss your customized diode laser solution.   Item Number Wavelength Power Fiber Core Diameter Fiber Numerical Aperture  Features Applications Download K405E03CN-0.160W 405 nm 160 mW 40 µm 0.22   Printing Datasheet K450FFBFN-0.800W 450 nm 800 mW 105 µm 0.22   Biochemical Analysis; Scientific Research; Printing Datasheet K520F03SN-0.005W 520 nm 5 mW 4 µm 0.13   Aiming Beam Datasheet K520F03FN-0.010W 520 nm 10 mW 105 µm 0.22   Aiming Beam Datasheet K635F03RN-0.002W 635 nm 2 mW 4 µm 0.13 1040-1200 nm Feedback Protection Aiming Beam for Fiber Laser; Printing; Medical; Scientific Research Datasheet K635F03RN-0.020W 635 nm 20 mW 4 µm 0.13 1040-1200 nm Feedback Protection Aiming Beam for Fiber Laser; Printing; Medical; Scientific Research Datasheet K785AFLFN-0.600W 785 nm 600 mW 105 µm 0.22 Δλ<0.12 nm Raman Spectroscopy; Sensing; Medical Datasheet K785AFLWN-0.600W 785 nm 600 mW - - Δλ<0.12 nm Raman Spectroscopy; Sensing; Medical Datasheet K793DB2RN-4.000W 793 nm 4 W 105 µm 0.22 1900-2100 nm Feedback Protection Fiber Laser Pumping; Solid State Laser Pumping Datasheet K808F11CA-4.000W 808 nm 4 W 200 µm 0.22   Medical; Material Processing Datasheet K808DB2RN-8.000W 808 nm 8 W 400 µm 0.22   Solid State Laser Pumping; Medical; Material Processing Datasheet K808F14CA-8.000W 808 nm 8 W 400 µm 0.22   Medical Datasheet K830AFLWN-0.600W 830 nm 600 mW - - Δλ<0.12 nm Raman Spectroscopy; Sensing; Medical Datasheet K830AFLFN-0.600W 830 nm 600 mW 105 µm 0.22 Δλ<0.12 nm Raman Spectroscopy; Sensing; Medical Datasheet K830F02FN-1.000W 830 nm 1 W 50 µm 0.14   CTP Printing Datasheet K830F02FN-2.000W 830 nm 2 W 50 µm 0.14   Flexo Printing Datasheet K915FB2RN-10.00W 915 nm 10 W 105 µm 0.22   CATV; Fiber Laser Pumping; Medical; Material Processing Datasheet K915FB2RN-12.00W 915 nm 12 W 105 µm 0.22   Fiber Laser Pumping; Medical; Material Processing Datasheet K940EB2RN-10.00W 940 nm 10 W 105 µm 0.22   Fiber Laser Pumping; CATV Datasheet K976AB2RN-3.000W 976 nm 3 W 105 µm 0.22 Wavelength-stabilized, Δλ<0.7 nm, 1020-1200 nm Feedback Protection Fiber Laser Pumping Datasheet K976AB2RN-9.000W 976 nm 9 W 105 µm 0.22 Wavelength-stabilized, Δλ<0.7 nm, 1020-1200 nm Feedback Protection Fiber Laser Pumping Datasheet K976DB2RN-10.00W 976 nm 10 W 105 µm 0.22 1020-1200 nm Feedback Protection Laser Pumping; Medical; Material Processing Datasheet K976F11CA-10.00W 976 nm 10 W 200 µm 0.22 Customer Options:  Aiming Beam, Power PD, Thermistor, Reflective Fiber Detection Sensor Medical; Material Processing Datasheet K976F14CA-10.00W 976 nm 10 W 200 µm 0.22 Customer Options:  Red Aiming Beam, Power PD, Thermistor, TEC Medical; Material Processing Datasheet   Applications: Pumping of Fiber Lasers and Solid State Lasers; Biochemical Analysis; Scientific Research; Computer to Plate(CTP) Printing; Aiming Beam; Medical; Material Processing; Raman Spectroscopy; Sensing; CATV