330-0022 Cooling Systems Water Filters for Lytron's RC006/045, MCS40/50

0

Optional Bypass for T-Three (former "Oasis 3") (10-12684-1C) and (10-12684-1CL) connected to 3/8" Brass Female NPT.

304 mm X 127 mm, 0.004 °C/W, Tubed Cold Plate.The CP12™ is a dual-sided, copper tubed cold plate that offers high performance and a large mounting area. The tubes of the CP12™ cold plates are coplanar with the plate to allow for dual-sided mounting. The cold plate's tube side offers higher performance as the copper tubes are in direct contact with the component being cooled. Its epoxy-free construction results in 30% better performance than other similar sized cold plates. Our range of standard tubed cold plates provide cost-effective thermal solutions for component cooling applications where the heat load is low-to-moderate. These tubed cold plates consist of copper tubes pressed into a channeled aluminum extrusion. This “Press-Lock” technology eliminates the need for performance-limiting epoxy between the tube and the plate, resulting in superior thermal performance. Each tubed cold plate has a single tube with no joint, ensuring leak-free operation.

Cooling Capacity 1-15 kW @+20 °C; Process Fluid Flow Rate 3-30 lpm @≤8.5 bar; 3/8”, 1/2”, 3/4”, 1” Fittings; Temperature Stability ±0.1-±0.5 K Termotek’s P800 series of stand-alone cooling units for optimum ratio of dimensions and performance are used wherever there is a need for precise cooling and the need to avoid integrating the refrigeration unit in a separate machine housing. High performance in a space-saving, mobile housing – this has proved to be a tried-and-trusted combination over many years in all fields of laser cooling, including optical assemblies, in laboratories, in the printing industry and on machine tools and for HSC milling. The practical arrangement of all the components in the compact housing means not only low maintenance requirements but low vibrations and noise emissions too. The P800 recirculating chillers are available for power ranges from 1 to 15 kW. P800 chillers provide active cooling and therefore contain a refrigeration circuit with a compressor and a heat exchanger for a variety of media. Both the refrigeration circuit and the cold water temperature are monitored and controlled by a central control system. The cold water is reliably fed to where it is required by a pump. An optional particle filter in the cold water outlet keeps the circuit clean, and a flow sensor for the return flow guarantees the required stable operation. The waste heat is either emitted to the environment via speed-controlled fans or transferred to a central water circuit via heat exchangers, so that the waste heat can be used, for example, for preheating the process water. Key Features: Compact, Stand-alone Enclosure Compact and Flexible in Terms of Installation Small Footprint - Excellent Cooling Power to Size Ratio Extremely High Level of Temperature Stability: ±0.1 to ±0.5 K Reliable Operation Low Noise and Vibration Levels Low Maintenance Requirements Small Water Tank Cooling Capacity 1 to 15 kW Flow Rate: 3 to 30 l/min and More on Demand Designed for Water With Additions or De-ionized Water Alarm Dry Contacts via 9-pole Sub-D on Rear Panel Water Level Display Speed-controlled Fan RS232 Interface Remote Start Via 24 VDC Signal 50/60 Hz Design Refrigerant: R134a Applications: Cooling of Lasers (CO2, Passively Cooled Lasers, Fiber Lasers); Cooling of Medical and Laboratory Equipment; Printing Industry; HSC Spindles; Tooling Machines; Laboratories; Optical Assemblies