Passives

Product Portfolio
AMS Technologies has many years of experience in the design, sale and support of passive components for high-voltage, high-frequency and high-power applications in the industrial, medical, military, communications and research areas. Our product offering of passives comprises high-quality resistors and capacitors that are suitable exactly for these kind of applications.

A large variety of special high-precision resistor technologies is available from AMS Technologies, e.g. resistors with extremely low inductance, rated for especially high power (up to 100 kW), high voltage (up to 48 kV) or high temperatures (up to +275°C), variants for RF applications, but also components featuring extreme long-term stability (up to 0.025% per 1000 hours in extended load life) or ultra-low temperature coefficients (as low as 2 ppm/°C). Packages range from small surface-mount versions all the way to 1-m-long water-cooled, high- load resistors with 10 cm in diameter.

Our broad capacitor portfolio includes products like ceramic capacitors for HF and high voltage operation and filter or snubber capacitors with polypropylene dielectrics, but also specialty vacuum/gas capacitors for high energy storage and pulse discharge, capacitors for RF use or water-cooled devices rated to 4,000 kVA.

AMS Technologies’ range of passives has been chosen to support customers working in application areas where quality, expertise and customer-specific solutions are of ultimate importance. Our extensive knowledge and experience allow us to advise customers on the correct components, and we can also provide custom solutions and products – contact the AMS Technologies passive components experts to discuss dedicated solutions tailored to your requirements.

Alternative Term: Passive Components

1776 Precision High Voltage Divider Networks

The exceptional performance of this extensive family of 1776 Precision Decade Resistor Voltage Dividers has been achieved through the special combination of advantages provided by Caddock's Tetrinox resistance films. This advanced film resistor technology provides the performance characteristics required by the precision input signal ciruits of both bench-type and laboratory digital instruments. There are now 39 standard models in the expanded family of Type 1776 precision resistor networks that include: 3, 4, and 5 - decade voltage dividers with ratios from 10:1 to 10,000:1. 1,200 volts continuous ratings and overvoltage to 2,000 volts. Many combinations of Ratio and Absolute Tolerance, and Ratio and Absolute Temperature Coefficient.

Product number: SW10263

Manufacturer: Caddock Electronics

1787 Precision Current Sense Resistors

Twelve standard models in five network arrangements of Caddock's 1787 Current Sense Resistor Networks provide the specific accuracy and resistance values required for a wide range of current measuring instruments and circuits. Type 1787 Current Sense Resistor Networks utilize Caddock's Micronox® resistance films and advanced high thru-put laser manufacturing capabilities to achieve many vital advantages in precision current measurement circuits, including laboratory and bench-type digital instrumentation: The thin-profile single-package configuration replaces as many as four discrete current sense resistors. The monolithic construction and standardized lead spacing simplify installation. Caddock Micronox® resistance films provide exceptional stability for improved long-term measurement accuracy.

Product number: SW10264

Manufacturer: Caddock Electronics

AR Series Water-Cooled Oil-Filled Film Capacitors

6.0 µF to 1400 µF; 750 kv to 1250 kv; 300 kVA to 1600 kVA High capacitance at high power 6 to 1,400 µF capacitance 800 to 1,250 VRMS 240 to 2,000 ARMS 300 to 2,000 kVA Up to 25 kHz These oil-filled, water-cooled capacitors are aimed at particularly demanding applications such as high-voltage systems, pulsed lasers or induction heating. Select the right component from our portfolio of oil-filled capacitors. We offer a wide range of standard packing components and internal structures that make the capacitors suitable for energy storage, DC filtering, transient snubbing and high alternating current applications. The standard types offered here do not provide the solution to your challenge? We design, manufacture and test customized oil-filled capacitors according to your specifications - please contact us!

Product number: SW10338

Manufacturer: HIGH ENERGY CORPORATION

CC Precision Chip Resistors

The CC Low Resistance Precision Chip Resistor is the best choice for switching power supplies, motor speed controls, and high current sensing applications. The chip resistors with sizes of 2015 and 2520 for Wire Bond Style and 1512, 2015 and 2520 for Flip Chip Style, provides a resistance ranges of 0,010 Ω to 10 Ω. Key Features: Style FC - Flip Chip version for surface mount applications. Style WB - Wire Bond version for hybrid applications with metallized back surface for solder down heat sinking of the chip, includes bondable termination pads to receive aluminum wire bonds. Thermal resistance is provided to optimize high power designs when utilizing higher thermal conductivity circuit board substrates such as IMS or Alumina. Resistance range down to 0.010 ohm at ±5%, 0.050 ohm at ±2%,and 0.10 Ω at ±1%. Low inductance provides excellent high frequency and pulse response. High pulse handling and overload capability. Best choice for switching power supplies, motor speed controls, and high current sensing applications.

Product number: SW10260

Manufacturer: Caddock Electronics

CC Series Oil-Filled Film Capacitors

1 µF to 20 µF; 2,000 kv to 10,000 kv DC Filter Capacitors 1 to 20 µF capacitance Voltage 2,000 to 10,000 VDC Plated drawn steel cans Our oil-filled capacitors are aimed at particularly demanding applications such as high-voltage systems, pulsed lasers or induction heating. Select the right component from our portfolio of oil-filled capacitors. We offer a wide range of standard packing components and internal structures that make the capacitors suitable for energy storage, DC filtering, transient snubbing and high alternating current applications. The standard types offered here do not provide the solution to your challenge? We design, manufacture and test customized oil-filled capacitors according to your specifications - please contact us! Specifications Capacitance Range 1 to 20 µF Capacitance Tolerance ± 10 % standard, other tolerances available Operating Temperature -40 °C to +90 °C Insulation Resistance 25,000 MΩ•µF at 25 °C typical AC Ripple Voltage The sum of the DC voltage and peak AC ripple should not exceed the capacitor’s VDC rating. Additionally, the AC component should not exceed: 20 % of VDC at 60 Hz; 10 % of VDC at 400Hz; 5 % of VDC at 1 kHz; 1 % of VDC at 10 kHz Can Construction Drawn plated steel, epoxy paint optional Dielectric Kraft paper and polypropylene with environmentally compatible impregnant

Product number: SW10336

Manufacturer: HIGH ENERGY CORPORATION

CD Precision Chip Resistors

Type CD Low Resistance Precision Chip Resistors utilize the proven Caddock Micronox® resistance films to achieve the unique low resistance range in this family. The special performance features of the Type CD Low Resistance Precision Film Resistor include: Style FC - Flip Chip version for surface mount applications. Style WB - Wire Bond version for hybrid applications with metallized back surface for solder down heat sinking of the chip, includes bondable termination pedestals to receive aluminum wire bonds. Resistance as low as 0.010 Ω at ±1%. Pedestal terminals in this design provide an ultra low resistance connection pad which maintains the precision 0.010 Ω ±1% at the point of customer Kelvin connection to the resistor chip. The pedestal terminal with its copper core also provides heat spreading which enhances the high power handling capability. Thermal resistance is provided to optimize high power designs when utilizing higher thermal conductivity circuit board substrates such as IMS or Alumina. High pulse handling and overload capability. Low inductance provides excellent high frequency and pulse response.

Product number: SW10261

Manufacturer: Caddock Electronics

CHD Series Metallized Film Capacitors

0.01 µF to 0.33 µF ; VMAX 700 kV; SMAX 150 kVA 700 VRMS Working Voltage 150 kVA Max Power 250 ARMS Max Current Conduction Cooled Series & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.1 to 0.2 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 68 x 33 x 22.5 mm, 2 11/16 x 1 5/32 x 7/8 inch Weight 0.2 kg; .44 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10320

Manufacturer: HIGH ENERGY CORPORATION

CHE Series Metallized Film Capacitors

0.2 µF to 2.0 µF ; 525 kV to 700 kv; 325 kVA to 400 kVA Up to 700 VRMS Working Voltage Up to 400 kVA Max Power Up to 800 ARMS Max Current Conduction Cooled Series & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.2 to 2.0 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 70 x 57 x 41 mm, 2 3/4 x 2 1/4 x 2 5/8 inch Weight 0.5 kg; 1.1 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10321

Manufacturer: HIGH ENERGY CORPORATION

CHG Series Metallized Film Capacitors

0.1 µF to 1.32 µF ; 500 kV to 1000 kv; SMAX 300 kVA Up to 700 VRMS Working Voltage 600 kVA Max Power Up to 525 ARMS Max Current Conduction Cooled Series & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.18 to 1.2 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 49 x 49 x 30 mm, 1 15/16 x 1 15/16 x 1 3/16 inch Weight 0.25 kg; 0.5 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10322

Manufacturer: HIGH ENERGY CORPORATION

CHH Series Metallized Film Capacitors

0.1 µF to 2.5 µF ; 400 kV to 700 kv; SMAX 160 kVA Up to 700 VRMS Working Voltage160 kVA Max PowerUp to 625 ARMS Max CurrentConduction CooledSeries & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.1 to 2.5 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 68 x 30.2 x 30.2 mm, 2 11/16 x 1 3/16 x 1 3/16 inch Weight 0.5 kg; 1.1 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10323

Manufacturer: HIGH ENERGY CORPORATION

CHJ Series Metallized Film Capacitors

0.18 µF to 5.0 µF ; 300 kV to 700 kv; 180 kVS to 210 kVA Up to 700 VRMS Working Voltage Up to 210 kVA Max Power Up to 600 ARMS Max Current Conduction Cooled Series & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.18 to 5.0 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 76.2 x 50.8 x 36.5 mm, 3 x 2 x 1 7/16 inch Weight 0.27 kg; 0.6 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10324

Manufacturer: HIGH ENERGY CORPORATION

CHL Series Metallized Film Capacitors

0.1 µF to 2.5 µF ; 400 kV to 700 kv; SMAX 160 kVA Up to 700 VRMS Working Voltage 160 kVA Max Power Up to 400 ARMS Max Current Conduction Cooled Series & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile.Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.1 to 2.5 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 68 x 32 x 30.2 mm, 2 11/16 x 1 1/4 x 1 3/16 inch Weight 0.5 kg; 1.1 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10325

Manufacturer: HIGH ENERGY CORPORATION

CHM Series Metallized Film Capacitors

0.1 µF to 2.5 µF ; 400 kV to 700 kv; SMAX 160 kVA Up to 700 VRMS Working Voltage 60 kVA Max Power Up to 400 ARMS Max Current Conduction Cooled Series & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.1 to 2.5 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 70 x 32 x 30.2 mm, 23/4 x 11/4 x 13/16 inch Weight 0.5 kg; 1.1 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10326

Manufacturer: HIGH ENERGY CORPORATION

CHN0 Series Metallized Film Capacitors

1.4 µF to 10 µF; 600 kV to 650 kv; SMAX 250 kVA Up to 650 VRMS Working Voltage 250 kVA Max Power Up to 600 ARMS Max Current Conduction Cooled Up to 10 µF This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 1.4 to 10 µF Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 80 mm (maximum) diameter x 70 mm high, 31/8 (maximum) diameter x 23/4 high Weight .75 kg; 1.7 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10327

Manufacturer: HIGH ENERGY CORPORATION

CHN6 Series Metallized Film Capacitors

0.03 µF to 1.2 µF; 450 kV to 1000 kv; SMAX 120 kVA Up to 1000 VRMS Working Voltage 120 kVA Max Power Up to 125 ARMS Max Current Conduction Cooled This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.025 to 1.2 µF Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 30 mm diameter x 29 mm high, 1 3/16 “ diameter x 1 1/8 “ high Weight .15 kg; .33 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10328

Manufacturer: HIGH ENERGY CORPORATION

CHR Precision Chip Resistors

The CHR High Resistance Precision Chip Resistors are designed for use in extremely low signal detection/amplification circuits. Applications include: Photodiode signal amplification, photomultipliers, ionization detection, etc. These precision high resistance chip resistors can also be ideal for use as the input resistor for high impedance voltage division. KEY FEATURES: Style FC - Flip Chip version mount applications with solderable metallized termination pads on one side of the substrate, back side is bare ceramic Style WB - Wire Bond for hybrid applications

Product number: SW10262

Manufacturer: Caddock Electronics

CHX Series Water-Cooled Film Capacitors

0.06 µF to 0.69; VMAX 1500 kv; SMAX 300 kVA 1500 VRMS Working Voltage 300 kVA Max Power Up to 200 ARMS Max Current Water-Cooled This series of water cooled metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package. They are water cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.06 µF standard; up to 0.069 µF custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 53 mm diameter x 71 mm high, 2 1/16 “ diameter x 2 13/16 “ high Weight .36 kg; .79 lb Operating Temperature Up to +90 °C Cooling method Individually water-cooled Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10329

Manufacturer: HIGH ENERGY CORPORATION

CP Series Oil-Filled Film Capacitors

0.01 µF to 1 µF; 10,000 kv to 100,000 kv DC Filter Capacitors 0.01 to 1 µF capacitance Voltage 10,000 to 100,000 VDC Welded Polypropylene cases Our oil-filled capacitors are aimed at particularly demanding applications such as high-voltage systems, pulsed lasers or induction heating. Select the right component from our portfolio of oil-filled capacitors. We offer a wide range of standard packing components and internal structures that make the capacitors suitable for energy storage, DC filtering, transient snubbing and high alternating current applications. The standard types offered here do not provide the solution to your challenge? We design, manufacture and test customized oil-filled capacitors according to your specifications - please contact us! Specifications Capacitance Range 0.01 to 1 µF Capacitance Tolerance ± 10 % standard, other tolerances available Operating Temperature -40 °C to +90 °C Insulation Resistance 25,000 MΩ•µF at 25 °C typical AC Ripple Voltage The sum of the DC voltage and peak AC ripple should not exceed the capacitor’s VDC rating. Additionally, the AC component should not exceed: 20 % of VDC at 60 Hz, 10 % of VDC at 400Hz, 5 % of VDC at 1 kHz, 1 % of VDC at 10 kHz Case Construction Welded Polypropylene plastic Dielectric Kraft paper and polypropylene with environmentally compatible impregnant

Product number: SW10340

Manufacturer: HIGH ENERGY CORPORATION

E Series Film Capacitors

Cornell Dubilier CDE (formerly NWL)’s E-Series polypropylene DC link film capacitors offer an alternative to small round cans, both film and electrolytic, with high capacitance density in an economical standard dry resin filled package. The rectangular painted aluminum package with various termination options allows for versatility in design layout. E-Series capacitors are well suited for many inverter and power supply applications including: DC input / output filtering DC Link AC harmonic filtering High energy storage pulse Unique features of the E-Series capacitor include: Standard economic package – With a standard case construction and end cap covers, Cornell Dubilier CDE created automated assembly to enhance production efficiency. Terminal options – Threaded terminals, threaded inserts, insulated exiting wires, and laminated bus are only a few of the terminal options to select from. Inverter design flexibility – Compact standard rectangle case, and central mounting stud option give designs various component layout alternatives.

Product number: SW10249

Manufacturer: NWL-Cornell Dubilier CDE

EC Series Film Capacitors

Cornell Dubilier CDE (formerly NWL)’s EC-Series metalized polypropylene DC link film capacitors offer large capacitance values, high Joule energy, and large current ratings in a single welded metal package. This dry resin filled package can have a variety of low inductance terminal options, brackets for mounting, and can also incorporate additional metal structure to accommodate additional components such as resistors, chill plates, etc. EC-Series capacitors are well suited for many inverter applications including: DC input / output filtering DC Link AC harmonic filtering High energy storage pulse Traction drives and heavy vehicles Unique features of the EC-Series capacitor include: Large Capacitance values at high voltages – By utilizing fabricated welded metal packages, Cornell Dubilier CDE can incorporate large capacitance values with the higher voltage ratings. Rugged metal cases – Welded metal cans fabricated from alum, brass, steel, and stainless steel are provided for rugged packages up to 500 lbs. Inverter design flexibility – With an already fabricated metal package, Cornell Dubilier CDE can fasten onto the metal container unique brackets to accommodate a variety of functionality.

Product number: SW10254

Manufacturer: NWL-Cornell Dubilier CDE

EPSL Series Ceramic Capacitors

180 pF to 16,000 pF; 6 kV to 40 kV Features Designed For High Voltage DC-Blocking High Capacitance Values in Small Size Rugged & Epoxy Encapsulated High-Torque Terminals Available Class II X5U Dielectric Specifications Temperature Range Operating: -55 °C to +85 °C Storage: -55 °C to +125 °C Capacitance Tolerance +80 %, -20 % standard Dissipation Factor 1.5 % Maximum when measured at a frequency of 1 kHz and 25 °C Dielectric Characteristic Class II X5U (+22 %, -56 % capacitance change with temperature over -55 °C to +85 °C) Dielectric Strength Will withstand a DC potential of 1.5 times VMAX rating for 10 Seconds at 25 °C Insulation Resistance 20,000 Megohms (MΩ) Minimum at 100 VDC Terminal Strength Maximum applied torque to be 12 inch-pounds or less (standard S terminal) Maximum applied torque to be 25 inch-pounds or less (high-strength H terminal) Humidity Protection Epoxy encapsulated Standard Markings “HEC”, Capacitance, Tolerance, Rated Working Voltage (VDC) and Date Code

Product number: SW10313

Manufacturer: HIGH ENERGY CORPORATION

EPSP Pulse Power Ceramic Capacitors

500 pF to 4,000 pF; 20 kV to 52 kV The EPSP Series of pulse power ceramic capacitors are optimized for sourcing and sinking short-duration high-current pulses. They are ideal components for use in pulsed gas laser systems, HVDC power supplies, lightning arrestor systems, electrostatic copying machines and electron microscopes. They utilize an N5500 temperature characteristic Class 1 dielectric to achieve a very low dissipation factor coupled with a very high capacitance-per-volume and an absence of etectable piezoelectric or electrorestrictive effects. Epoxy encapsulation provides excellent insulation resistance and a physically robust package. Specification Temperature Range Operating: -30 °C to +50 °C Storage: -30 °C to +50 °C Capacitance Tolerance ± 20 % standard; other tolerances available Dissipation Factor 0.5 % Maximum when measured at a frequency of 1 kHz Dielectric Characteristic Class I N5500 (± 1000 ppm/ °C) over the Operating Temperature range Dielectric Strength Will withstand a DC potential of VTEST (listed above) for 10 Seconds at 25 °C Insulation Resistance 20,000 Megohms (MΩ) Minimum at 100 VDC Terminal Strength Maximum applied torque to be 20 inch-pounds or less Humidity Protection Epoxy encapsulated Standard Markings “HEC”, Capacitance, Tolerance, Rated Working Voltage (VDC), TC and Date Code

Product number: SW10312

Manufacturer: HIGH ENERGY CORPORATION

EPSR Series High Voltage Pulse Power Ceramic Capacitors

700 pF to 4,000 pF; 20 kV to 40 kV High Energy Corporation's new line of Epoxy Encapsulated Ceramic Capacitors are designed for use in HVDC Power Supplies, electrostatic copying machines, lightning arrestor systems, electron microscopes and many laser applications. These capacitors feature a class I ceramic dielectric, low dissipation factor, and small case size. Specification Temperature Operating -300 °C to +500 °C Range: storage -300 °C to +500 °C Capacitance listed as +/- 20 %, other values Tolerance: available Dissipation 0.5 % maximum, when MeaFactor: sured at a frequency of 1 KHz. Dielectric all capacitors will withstand a strength DC test voltage, as listed, for test: 10 sec. at a temp. of 250 °C

Product number: SW10307

Manufacturer: HIGH ENERGY CORPORATION

ER Series Film Capacitors

Cornell Dubilier CDE (formerly NWL)’s ER-Series polypropylene DC link film capacitors offer a distinct alternative to small round cans, both film and electrolytic, with high capacitance density power in an economical standard package. The rectangular aluminum package with various mounting bracket options enables the capacitor to be operated in a variety of orientations. Component inventory, integration, and installation are streamlined as a result. ER-Series capacitors are well suited for many inverter applications including: DC input / output filtering DC link AC harmonic filtering High energy storage pulse Unique features of the ER-Series capacitor include: Standard economic package – With standard terminals and case construction, Cornell Dubilier CDE created automated assembly to enhance production efficiency. Unique stackable bracket design – Welded metal brackets enable capacitors to be mounted and stacked on floor or wall vertically or horizontally. Three bracket versions are available. Robust, rugged, and reliable construction – ER-Series capacitors are used in numerous high reliability, mission-critical applications such as renewable energy inverters. Inverter design flexibility – Compact design and mounting options give designs more component layout alternatives.

Product number: SW10245

Manufacturer: NWL-Cornell Dubilier CDE