MX500 Precision High Voltage Resistors

Product number: SW10927

Manufacturer: Caddock Electronics

Downloads

Product information "MX500 Precision High Voltage Resistors"

1.00 to 1,000 MΩ; ±1%; 2 to 10 W; Silicone Conformal Encapsulation; Film

Caddock Electronics’ MX500 series of RoHS compliant precision high voltage resistors were specifically developed for use in commercial and industrial high-voltage applications. Within the MX500 series, 13 different precision high voltage resistors are available with standard resistance values ranging from 1.00 to 1,000 MΩ.

The MX500 replaces the legacy MX400 series that has been discontinued. These resistors combine the proven performance of Caddock Electronics’ Micronox® resistance system with construction and operating specifications optimized for these general purpose applications.

For demanding high-voltage applications that require a wider operating temperature range or greater stability, we recommend Caddock Electronics' MG series of precision high voltage resistors or TG series of low TC precision high voltage resistors (capable of operating from -55 to +125 °C, with derating to +225 °C).

Key Features:

Five Models (Differing in Body Length) With Voltage Ratings From 7.5 kV To 32 kV
Resistance Range: 1.00 to 1,000 MΩ
Temperature Coefficient (TC): 80 ppm/°C, From 0 °C to +70 °C
Resistance Tolerance: ±1%
Excellent Long Term Stability
Non-Inductive Design
Well-Proven High-Temperature Silicone Conformal Coating

Manufacturer "Caddock Electronics"

Similar products

1776 Precision High Voltage Divider Networks

The exceptional performance of this extensive family of 1776 Precision Decade Resistor Voltage Dividers has been achieved through the special combination of advantages provided by Caddock's Tetrinox resistance films. This advanced film resistor technology provides the performance characteristics required by the precision input signal ciruits of both bench-type and laboratory digital instruments. There are now 39 standard models in the expanded family of Type 1776 precision resistor networks that include: 3, 4, and 5 - decade voltage dividers with ratios from 10:1 to 10,000:1. 1,200 volts continuous ratings and overvoltage to 2,000 volts. Many combinations of Ratio and Absolute Tolerance, and Ratio and Absolute Temperature Coefficient.

Product number: SW10263

Manufacturer:

1787 Precision Current Sense Resistors

Twelve standard models in five network arrangements of Caddock's 1787 Current Sense Resistor Networks provide the specific accuracy and resistance values required for a wide range of current measuring instruments and circuits. Type 1787 Current Sense Resistor Networks utilize Caddock's Micronox® resistance films and advanced high thru-put laser manufacturing capabilities to achieve many vital advantages in precision current measurement circuits, including laboratory and bench-type digital instrumentation: The thin-profile single-package configuration replaces as many as four discrete current sense resistors. The monolithic construction and standardized lead spacing simplify installation. Caddock Micronox® resistance films provide exceptional stability for improved long-term measurement accuracy.

Product number: SW10264

Manufacturer:

CC Precision Chip Resistors

The CC Low Resistance Precision Chip Resistor is the best choice for switching power supplies, motor speed controls, and high current sensing applications. The chip resistors with sizes of 2015 and 2520 for Wire Bond Style and 1512, 2015 and 2520 for Flip Chip Style, provides a resistance ranges of 0,010 Ω to 10 Ω. Key Features: Style FC - Flip Chip version for surface mount applications. Style WB - Wire Bond version for hybrid applications with metallized back surface for solder down heat sinking of the chip, includes bondable termination pads to receive aluminum wire bonds. Thermal resistance is provided to optimize high power designs when utilizing higher thermal conductivity circuit board substrates such as IMS or Alumina. Resistance range down to 0.010 ohm at ±5%, 0.050 ohm at ±2%,and 0.10 Ω at ±1%. Low inductance provides excellent high frequency and pulse response. High pulse handling and overload capability. Best choice for switching power supplies, motor speed controls, and high current sensing applications.

Product number: SW10260

Manufacturer:

CD Precision Chip Resistors

Type CD Low Resistance Precision Chip Resistors utilize the proven Caddock Micronox® resistance films to achieve the unique low resistance range in this family. The special performance features of the Type CD Low Resistance Precision Film Resistor include: Style FC - Flip Chip version for surface mount applications. Style WB - Wire Bond version for hybrid applications with metallized back surface for solder down heat sinking of the chip, includes bondable termination pedestals to receive aluminum wire bonds. Resistance as low as 0.010 Ω at ±1%. Pedestal terminals in this design provide an ultra low resistance connection pad which maintains the precision 0.010 Ω ±1% at the point of customer Kelvin connection to the resistor chip. The pedestal terminal with its copper core also provides heat spreading which enhances the high power handling capability. Thermal resistance is provided to optimize high power designs when utilizing higher thermal conductivity circuit board substrates such as IMS or Alumina. High pulse handling and overload capability. Low inductance provides excellent high frequency and pulse response.

Product number: SW10261

Manufacturer:

CHR Precision Chip Resistors

The CHR High Resistance Precision Chip Resistors are designed for use in extremely low signal detection/amplification circuits. Applications include: Photodiode signal amplification, photomultipliers, ionization detection, etc. These precision high resistance chip resistors can also be ideal for use as the input resistor for high impedance voltage division. KEY FEATURES: Style FC - Flip Chip version mount applications with solderable metallized termination pads on one side of the substrate, back side is bare ceramic Style WB - Wire Bond for hybrid applications

Product number: SW10262

Manufacturer:

HVD Ultra-Precision Voltage Dividers

The HVD Ultra-Precision Voltage Dividers are monolithic voltage dividers built with ceramic sendwich construction. These voltage dividers have ultra-precision performance in the range of 1500 Volts DC to 5000 Volts DC. These dividers are ideal for high performance voltage divisions applications in medical equipment, laboratory equipment, analytical instruments, etc.

Product number: SW10189

Manufacturer:

MG Precision High Voltage Resistors

The MG Precision High Voltage Resistors has been proven through many years of use in equipment that demands the highest reliability and stability, including TWT amplifiers, X-Ray systems, geophysical instruments and medical electronic. Most models are manufactured with Caddock's non-inductive design. KEY FEATURES Single-resistor values as high as 10 000 Megaohms Maximum continous operating voltages as high as 48 000 Volts Resistance Tolerances from 1% to 0.1% Temperature Coefficient, for standard resistance range, of 80 ppm/°C om combination with resistance tolerances as tight as 0,1%

Product number: SW10185

Manufacturer: