OPTIPOP Reel Cleaner Spare Reel Set ATC-RS-01 (1 set = 6 pieces)

Reel Cleaner - One slot type

P/N 14100400 Cletop Cleaning Stick - 2,5mm Dia, 2,5mm Diameter Cletop Cleaning Sticks, Sold 200 Sticks per Box, Use on bulkhead adapters with 2,5mm diameter sleeves such as FC, ST, and SC adapters,

Neoclean-E is a simplified pen type cleaner with a replacement cartridge, which allows the cleaning of the end-faces of fibre connectors and in-adapter ferrules with one simple action,

Refractive Index 1.56; 250 cps Viscosity at 25°C Norland Optical Adhesive 83H ("NOA83H") is a single component liquid adhesive that cures in seconds to a tough, hard polymer when exposed to ultraviolet light. It is recommended as an extremely fast and efficient way to precisely bondoptical components. In addition to UV light, heat can also be usedto cure this one part adhesive.The outstanding characteristic of this material is its extremely fast cure. Thin films can be initially set in under 10 seconds and thick films in 20 seconds using the light sources listed below. It is also extremely stable when not exposed to UV light. NOA 83H will not gel up in dispenser tips or cure before you want it to.Typical Properties of NOA 83H Solids 100% Elongation at Failure 30% Modulus of Elasticity (psi) 160,000 Tensile Strength (psi) 3,500 Hardness - Shore D 85 Shelf life of the liquid is at least 4 months from the date of shipment if stored in a cool (5-22° C), dark place in the original container. If refrigerated, allow the adhesive to come to room temperature prior to use.

Refractive Index 1.54; 20,000-25,000 cps Viscosity at 25°C Norland Optical Adhesive 68T is a clear, colorless, high viscosity liquid photopolymer that will cure when exposed to ultraviolet light. Since it is a one part system and 100% solids, it offers many advantages in bonding of optical materials where the bonding surface can be exposed to light. The use of NOA 68T eliminates premixing, drying and heat curing operations common to other optical adhesive systems. Curing time is remarkably fast, and is dependent upon thethickness applied and the amount of ultraviolet light energy available.The NOA 68T is designed to give improved adhesion to many plastics such as acrylic, polycarbonate and celluloseacetate butyrate. In addition to plastics,NOA 68T has good adhesion to glass and metals and can be used to bond combinations of the three. Suggested uses for NOA 68T include bonding compound plastic lenses, laminating polarizedfilm between glass or plastic, mounting plastic lenses in metal or plastic mounts and bonding cover glasses. NOA 68Thas a high viscosity which allows the user to screen printed onto substrates. Typical Properties of NOA 68T Solids 100% Elongation at Failure 59% Modulus (psi) 12,400 Tensile (psi) 714 Hardness - Shore D 50Ty Shelf life of the liquid is at least 4 months from the date of shipment if stored in a cool (5-22° C), dark place in the original container. If refrigerated, allow the adhesive to come to room temperature prior to use.

Gold Coated, Other Materials on Request; Fiber Type SM, MM, PM; Metalization Thickness 1.65 to 5.2 µm; Maximum Plating Length 50 mm; Operating Temperature -40 to +85 °C OZ Optics’ ME series of metalized fibers are specifically designed for optoelectronic packaging. The fiber is first coated with a layer of nickel to provide superior adhesion and a stable soldering base. The fiber is then plated with an overcoat layer of gold to provide resistance to oxidization. The result is a strong, uniform coating capable of handling the rigors of soldering and hermetic sealing. OZ Optics metalized fibers are well suited for use in assemblies that must conform to Telcordia requirements. If required, OZ Optics metalized fibers can be manufactured with masked ends. This process provides a clean, non-metalized fiber end suitable for termination with ceramic ferrules, fusion splicing or direct connection to a device and allows for an easy transformation of devices into hermetically sealed packages. Also available are custom mid-span metalization of optical fibers and metalized ribbon fibers. The mid-span configuration provides a solution for hermetically sealing in-fiber devices such as fiber Bragg gratings, optical isolators or optical filters, as well as allowing larger package devices that exceed the length restrictions of standard metalized fibers. Metalization of ribbon fibers allows for easy hermetic sealing of multiple fibers into hermetic packages that require many fibers or are being used with V-Groove assemblies. OZ Optics metalized fibers are available with Single Mode (SM), Multi Mode (MM) or Polarization Maintaining (PM) fibers. In general, OZ Optics uses polarization maintaining fibers based on the PANDA fiber structure when building polarization maintaining components and patch cords. However, OZ Optics can construct devices using other PM fiber structures. OZ Optics also carries some alternative fiber types in stock, please contact AMS Technologies for availability. If necessary, OZ Optics is willing to use customer supplied fibers to build devices. Key Features: Single Mode (SM), Multi Mode (MM) or Polarization Maintaining (PM) Fibers Easy to Solder Cleaved Enfaces Available Unplated (Masked) Ends Available Mid-span Plating Available Designed to Meet Telcordia Requirements Large Volume Manufacturing Capacity Custom Configurations Available Applications: Hermetic Feed-throughs; Integrated Optics Packaging; Diode Pigtailing

The AMS-109-1.4-1.5CH is a high-efficiency thermoelectric cooler (TEC) designed for advanced thermal management applications in industrial, medical, and scientific fields. With a Qmax of 51W, this compact and powerful Peltier module ensures precise and stable temperature control for semiconductors, laser systems, medical instruments, and industrial automation equipment.Engineered with high-quality Al₂O₃ ceramic materials, this 40x40 mm TEC module provides exceptional heat transfer efficiency and features a maximum temperature differential (dTmax) of 70K, making it ideal for applications requiring strict thermal stability and long-term reliability. The integrated 13.0mm center hole enhances mounting flexibility, allowing for secure and easy installation in complex cooling assemblies.Key FeaturesSuperior Cooling Performance – Qmax of 51W ensures effective thermal dissipation, supporting high-precision cooling applications.Optimized Electrical Efficiency – Operates at Umax 13.7V and Imax 6.1A, ensuring stable power consumption and energy efficiency.Wide Temperature Differential – With a dTmax of 70K, this TEC provides excellent thermal regulation in demanding environments.Durable and Compact Design – The 40x40 mm rectangular shape with a 4.0 mm height ensures optimal integration into confined cooling systems.High-Quality Ceramic Construction – Made with Al₂O₃ ceramic, offering high thermal conductivity and mechanical stability.Integrated Center Hole for Versatile Installation – A 13.0 mm hole allows for secure mounting, enhancing compatibility with specialized cooling systems.Reliable Lead Wires – Equipped with 22 AWG wires for secure electrical connections, and ROHS compliance ensures environmental safety.Sealed for Durability – Features epoxy sealing (E-type) for enhanced protection against environmental factors.ApplicationsSemiconductor Thermal Management – Ensures efficient heat dissipation in high-performance chips, sensors, and microprocessors, preventing overheating and performance degradation.Medical and Laboratory Devices – Provides stable temperature control for diagnostic instruments, cryogenic research, and precision laser equipment.Laser and Optical Cooling Systems – Effectively regulates thermal conditions in high-power laser diodes and optoelectronic devices.Industrial Electronics and Instrumentation – Supports temperature-sensitive electronics, ensuring operational efficiency in automation and testing equipment.Aerospace and Automotive Thermal Control – Delivers reliable cooling solutions for high-performance vehicle and aerospace applications.What’s Next?The AMS-109-1.4-1.5CH Thermoelectric Cooler is a cutting-edge solution for applications demanding high-efficiency, precision cooling, and durability. Its advanced Peltier technology and versatile mounting options make it an ideal choice for professionals requiring robust temperature control solutions.For technical support, availability, or customized solutions, consult with a thermal management specialist to integrate this TEC into your next project.

mini Liquid Cooling Evaluation Kit; Cooling Capacity 450 W @+25°C; Power Supply 24 VDC Key Features: Up to 450 W Cooling Capacity Ideal for Compact Cooling of Lasers or Bio Reagents Ideal for Mobile Cooling Applications Compressor Speed Control for Ease of Temperature Control Low Vibration, Low Noise Lightweight, Compact Easy to Integrate Kit to Interface With OEM Water Circuit and Electronics Control Components Carefully Designed to Match Each Other The mLC-C-450-24-KIT is a sealed vapor compression circuit with a speed controlled miniature rotary BLDC compressor. The evaporator is a brazed plate heat exchanger, the interface to the customer liquid coolant circuit.  The mLC-C-450-24-KIT comes with the separate 24 VDC inverter board. The compressor speed can be set from the upper control system by frequency or analog signal. The condenser is an aluminum finned copper tube heat exchanger coil and must be cooled by forced convection, i.e. a 120x120 mm fan or equivalent. The heat exchanger stainless steel plates are nickel brazed suitable for a variety of coolant fluids, such as water, DI water and glycol-water mixtures. The plate heat exchanger has male R ¼” connectors for the customer to connect its water circuit. The mLC-C-450-24-KIT’s condenser is an aluminum finned copper tube heat exchanger coil and must be cooled by forced convection, i.e. a 120x120 mm fan or equivalent. The heat exchanger stainless steel plates are nickel brazed suitable for a variety of coolant fluids, such as water, DI water and glycol-water mixtures. The plate heat exchanger has male R ¼” connectors for the customer to connect its water circuit. If you are looking for a ready-to-use recirculating chiller based on this mLC-Kit that includes the coolant loop, have a look at our mRC-C-450-100/240 mini Recirculating Chiller as well as our other liquid cooling solutions offerings – or browse our large portfolio of liquid to air temperature management assemblies. For lower cooling capacities, we also carry a Peltier-based mini Direct Cooling KIT providing up to 130 W with no liquids or moving parts (except fans). Your customized liquid cooler: AMS Technologies’ thermal management specialists are happy to develop a liquid cooling solution tailored to your needs – based on Peltier or compressor technology – and offer all services from development and proof-of concept to series production. Get in touch with us now to discuss your customized liquid cooler. Specifications: Cooling Capacity: Approximately 450 W (at 100 rps, Twater = +25°C, Tambient = +25°C) Power Supply Consumption: < 150 W (6 A @24 VDC, 80 rps) Temperature Range (Ambient, Operating): -10°C to +45°C Hydraulic Parameters: Pressure Drop 30 kPa @4 lpm Controller/Inverter Board: Operating Range 20 to 100 rps, Speed Command Square Wave Pulse Frequency 40 to 200 Hz, Variable Resistor Input 2 kΩ to 10 kΩ Dimensions: 200 x 172 x 180 mm (WxHxD) Weight: 3.4 kg Applications: Compact Cooling of Lasers or Bio Reagents With up to 450 W Cooling Capacity; Mobile Cooling Application; Evaluation Kit to Interface With OEM Water Circuit and Electronics Control

Vapor Compression Chiller; 1000 W @+35°C (amb)/+25°C (water); Flow Rate 5.5 lpm @ 0.5 bar, Temperature Stability ≥±0.05 K at constant load; Power Supply 90-264 VAC Key Features: Recirculating Water Chiller Easy to be Integrated in Customer Application User-Definable PID Parameters and Fan Velocity Silent Operation with Low Vibration and Noise Ideal for Water Cooling Tasks up to 1000 W Customizable booster cooling capacity IoT Ready as an Option: Remote Operation, Monitoring and Service over Integrated Ethernet Interface Depending on the temperatures of coolant (water) and ambient, AMS Technologies’ mRC-C-1000-100/240 recirculating chiller provides approximately 1000 W (Twater = +25°C, Tambient = +35°C) in silent mode boostable to higher cooling capacities with higher fan speeds. The chiller contains a compressor-based refrigerant circuit as well as a closed, recirculating coolant (water) circuit. Due to its speed-controlled compressor, the mRC-C-1000-100/240 recirculating chiller offers low vibration and noise throughout the compressor’s BLDC speed range. The system’s features include global operability due to a universal 90 to 264 VAC power supply, as well as an optional integrated Ethernet interface allowing remote operation, monitoring and service. Further options are a gear pump providing 5 bar @5 l/min, CPC inlet and/or outlet fittings, external coolant filters or dust filters, and a hardware set for 19” rack mount (6U). For lower heat loads, we also carry a mRC-C-450-100/240 mini Recirculating Chiller with up to 450 W cooling capacity. Specifications: Cooling Capacity: nominal 1 kW (Twater = +25 °C, Tambient = +35 °C) Temperature Stability: +-0.05°C at constant load Available Pressure Head: 0.5 bar @ 5.5 lpm (standard), 5 bar @ 5 lpm (optional) Control: Local, RS232, IoT Ready, Interlock Power Supply: 90 to 264 VAC, 24 VDC Derivative for OEM integrations available on Demand Power Consumption: <750 W Options: 19” Rack Mount (6U); Ethernet / IoT Ready; Optional Pumps; CPC Inlet/Outlet Fittings; External Coolant Filters; External Dust Filters; Green Version Based on Propane (R290) as Refrigerant Dimensions: 443 x 283 x 675 mm, Main Body Without Filter Approval: CE (in process) Applications: Water Cooling of Lasers and Other Applications with up to 1000 W Heat Load

Combining a 2A current driver for a laser diode, SLED, SOA or a similar device with a TEC controller capable of driving up to 4A of TEC current in a compact, self-contained enclosure, the “cLDD” device (compact Laser Diode Driver) is an all-in-one unit designed for convenience of use. It can be operated remotely via USB using a software control application with graphical user interface for real-time device monitoring, control and data logging. Once configured, the cLDD may also be operated stand-alone (disconnected from the computer), and operating parameters may be changed via the cLDD keypad. The cLDD base unit is shipped with USB cable, software control application and power supply (country-specific AC power cord not included). For operation of the device, at least one of two user-interchangeable mounts has to be selected and ordered separately: 1) 14-pin butterfly mount, provided with adapter boards for Type 1, Type 2 and customizable laser diode pinouts, or 2) DIL mount.

405-480 nm; 400 nm Cutoff Wavelength; Ø3 mm, blue, PVC Jacket; FC/APCs; 5 m Cable Length The QPMJ-3A3A-400-3/125-3-5-1 high power polarization maintaining fiber patchcord is terminated with angle FC/APC connectors on both ends that are pre-aligned and locked on the slow axis. The PM patch cable is 5 m long and 3 mm OD jacketed. OZ Optics’ QPMJ series of polarization maintaining (PM) fiber optic patchcords is specifically designed for high-power applications.