NOA 83H Optical Adhesive 10g syringe
€26.50
Available in 15 days, delivery time 1-2 days
Product information "NOA 83H Optical Adhesive 10g syringe"
Refractive Index 1.56; 250 cps Viscosity at 25°C
Norland Optical Adhesive 83H ("NOA83H") is a single component liquid adhesive that cures in seconds to a tough, hard polymer when exposed to ultraviolet light. It is recommended as an extremely fast and efficient way to precisely bondoptical components. In addition to UV light, heat can also be usedto cure this one part adhesive.
The outstanding characteristic of this material is its extremely fast cure. Thin films can be initially set in under 10 seconds and thick films in 20 seconds using the light sources listed below. It is also extremely stable when not exposed to UV light. NOA 83H will not gel up in dispenser tips or cure before you want it to.
Typical Properties of NOA 83H
| Solids | 100% |
| Elongation at Failure | 30% |
| Modulus of Elasticity (psi) | 160,000 |
| Tensile Strength (psi) | 3,500 |
| Hardness - Shore D | 85 |
Shelf life of the liquid is at least 4 months from the date of shipment if stored in a cool (5-22° C), dark place in the original container. If refrigerated, allow the adhesive to come to room temperature prior to use.
Customers also viewed
LD 15 A; Chassis Mount; Supply Voltage 10-14 VDC CURRENT & VOLTAGE Output Current Range (I): 0-15 Аmps Output Voltage Range (0.75*Vin max) (V): 1-10 Volts Setpoint Resolution: 0.01 Amp Rise Time: (Iout = 7,5A) min - 150μs; max - 500μs Rise Time: (Iout = 15A) min - 140μs; max - 500μs Fall Time: min - 250μs; max - 1200μs Current Stability: <0.2 % Current Setpoint Absolute Accuracy: <1 % LASER DIODE PROTECTION Soft-Start Ramp to Current Setpoint User Adjustable Current Limit Over-Current Protection Fast Shutdown Over-Temperature Thermal Warning and Shutdown Reverse Current Protection Crowbar Circuit Protection Disable Input Interlock DIMENSIONS AND WEIGHT Dimensions: 57.9 mm x 36.8 mm x 15 mm Weight: 55 g USER INTERFACE Analog RS-232 / UART Digital Interface (USB as a paid option 20 €) Enable / Disable Input Signal Input DRIVER INPUT Input Voltage Range (Vin): 10V to 14V PACKAGE SET Driver – 1 pcs 50 cm ribbon cable with one 8-pin connector – 1 pcs 50 cm ribbon cable with one 14-pin connector – 1 pcs Wires fixing set – 1 pcs Datasheet & User Manual – 1 pcs WARRANTY PERIOD 1-year manufacturer's warranty