Disc, Sheet and Roll Type Available; Grit from 0.3 to 60 µm; Aluminum Oxide; Stainless Steel Ferrule; Fiber Optic Polishing Nanolap's high-quality lapping films use precision-graded aluminum oxide particles coated on a polyester film. They provide precision finishes in diverse applications including polishing of industrial rolls (coating, calandering, etc.), micromotor shafts, CD/DVD stampers, as well as other applications requiring controlled surface finishes on metals, alloys and ceramics. 

5 inch Disc; Grit 0.3 µm; Aluminium Oxide; Stainless Steel Ferrule; no PSA The 26M-0.3-5D fiber optics polishing film from Nanolap comes in a pack that contains 10 pieces.

5 inch Disc; Grit 1 µm; Aluminium Oxide; Stainless Steel Ferrule; no PSA The 26M-1-5D fiber optics polishing film from Nanolap comes in a pack that contains 10 pieces.

5 inch Disc; Grit 12 µm; Aluminium Oxide; Stainless Steel Ferrule; no PSA The 26M-12-5D fiber optics polishing film from Nanolap comes in a pack that contains 10 pieces.

5 inch Disc; Grit 3 µm; Aluminium Oxide; Stainless Steel Ferrule; no PSA The 26M-3-5D fiber optics polishing film from Nanolap comes in a pack that contains 10 pieces.

5 inch Disc; Grit 5 µm; Aluminium Oxide; Stainless Steel Ferrule; no PSA The 26M-5-5D fiber optics polishing film from Nanolap comes in a pack that contains 10 pieces.

Disc, Sheet and Roll Type Available; Grit from 1 to 30 µm; Silicon Carbide; Stainless Steel and Ceramic Ferrule; Fiber Optic Polishing The 46P series are tightly-graded silicon carbide particles uniformly coated onto a polyester film backing. These polishing films manufactured by Nanolap can be used in a number of applications. 

5 inch Disc; Grit 15 µm; Silicon Carbide; Stainless Steel and Ceramic Ferrule; no PSA The 46P-15-5D fiber optics polishing film from Nanolap comes in a pack that contains 10 pieces.

5 inch Disc; Grit 3 µm; Silicon Carbide; Stainless Steel and Ceramic Ferrule; no PSA The 46P-3-5D fiber optics polishing film from Nanolap comes in a pack that contains 10 pieces.

5 inch Disc; Grit 30 µm; Silicon Carbide; Stainless Steel and Ceramic Ferrule; no PSA The 46P-30-5D fiber optics polishing film from Nanolap comes in a pack that contains 10 pieces.

5 inch Disc; Grit 9 µm; Silicon Carbide; Stainless Steel and Ceramic Ferrule; no PSA The 46P-9-5D fiber optics polishing film from Nanolap comes in a pack that contains 10 pieces.

Disc, Sheet and Roll Type Available; Grit from 0.5 to 15 µm; Diamond; Ceramic Ferrule; Fiber Optic Polishing Nanolap's polishing films of the 66HPX series are designed for fiber optic connector epoxy removal, refining and polishing. They are manufactured with a high concentration of diamond and a thick coating for high performance and durability. They are available in discs, sheets and rolls in grades of 0.5, 1, 3, 6, and 9 micron, with or without PSA backing. 

5 inch Disc; Grit 15 µm; Diamond; Ceramic Ferrule; no PSA The 66HPX-15-5D fiber optics polishing film from Nanolap comes in a pack that contains 5 pieces.

5 inch Disc; Grit 3 µm; Diamond; Ceramic Ferrule; no PSA The 66HPX-3-5D fiber optics polishing film from Nanolap comes in a pack that contains 5 pieces.

5 inch Disc; Grit 6 µm; Diamond; Ceramic Ferrule; no PSA The 66HPX-6-5D fiber optics polishing film from Nanolap comes in a pack that contains 5 pieces.

5 inch Disc; Grit 9 µm; Diamond; Ceramic Ferrule; no PSA The 66HPX-9-5D fiber optics polishing film from Nanolap comes in a pack that contains 5 pieces.

Disc, Sheet and Roll Type Available; Grit from 1 to 9 µm; Diamond; Ceramic Ferrule; Fiber Optic Polishing Nanolap® 66XL diamond lapping films are produced by a precision coating of diamond particles on a polyester film. The 66XL series provides outstanding life and finish for fiber optic connectors. 

5 inch Disc; Grit 1 µm; Diamond; Ceramic Ferrule; no PSA The 66XL-1-5D fiber optics polishing film from Nanolap comes in a pack that contains 5 pieces.

Disc, Sheet and Roll Type Available; Silicon Dioxide; Ceramic Ferrule; Fiber Optic Polishing Nanolap® 86-series final polishing films are produced by a precision coating of silicon dioxide on a polyester film. They are used for the final step of polishing fiber optic connectors and will help you achieve a consistently superior surface finish. 

5 inch Disc; Silicon Dioxide; Ceramic Ferrule; no PSA The 86P-5D fiber optics polishing film from Nanolap comes in a pack that contains 10 pieces.

Max. No. of Connectors 48; Connector Type ST, FC, SC, APC, MTP, SMA, E2000, Other; Radius of Curvature 7-30 mm; Apex Offset <50 µm; Undercut/Protrusion <50 nm; Back Reflection -35—65 dB; Automated Fiber Stub Removal Nanometer Technologies’ ACP-24 is an automated connector polisher with touchscreen technology for easy use and includes an ASR automated stub removal fiber optic polisher. The ACP-24 can polish many types of industry-standard, military and custom connectors. The system easily accommodates a full range of industry standard polishing styles to accommodate single mode polish specs like PC, UPC, APC, FLAT, and DOMED. With the ACP-24 you can automate fiber stub removal, polishing times, pressure and motor speeds for each step. Complete polishing procedures are stored inside of the ACP-24 to save time and ensure repeatability. Create, save, and recall custom polishing procedures for custom jobs. Polishing procedures can be saved to a computer for easy back-up or for transferring to another ACP-24. The ACP-24 utilizes Nanometer Technologies’ patented figure 8 polishing pattern that creates an angle of attack on the connector end face that changes 720°, 60 times a second, giving optimal control of the connector end face geometry. Use the ACP-24 to polish a wide variety of connectors including: ST, FC, SC, APC, MTP (up to 72 fibers), Mil 29504, Mil 38999, SMA, E2000, Radial Luxcis, T-Foca, bare fiber, bare plastic & many more. Polish a wide variety of ferrule material including all types of ceramic, glass, stainless steel, plastic, bare fiber, bare plastic, titanium & several others. The ACP-24 features a pneumatic pressure system, which allows for flexibility that is required to attain consistent accurate results The system is compatible with all MCP-24 polishing fixtures, supporting up to 48 connectors at a time. It includes the ASR System for automated stub removal – no more removing fiber stubs by hand. ASR works with Nanometer Technologies' polishing fixtures reducing the need to purchase special fixture plates and includes built-in pre-programmed processes. Key Features: Change Polishing Times, Pressure and Motor Speed Automated Fiber Stub Removal Easily Create and Save Custom Polishing Procedures Factory-preset Polishing Procedures Touchscreen Interface for Easy Use, Touchscreen is Both Water and Chemical Proof Patented Figure 8 Polishing Pattern Designed for High-volume Single Mode (SM) and Multi Mode (MM) Polishing Consistent High-yield Repeatable Performance Works With Existing MCP24 Fixture Radius of Curvature: 7 to 30 mm Apex Offset: <50 µm Undercut/Protrusion: <50 nm Back Reflection: PC -45 dB, UPC -55 dB, APC -65 dB, Multi Mode -35 dB Maximum Connector Load: 48 Dimensions: 368 x 375 x 356 mm Weight: 16.9 kg Applications: High-volume Polishing of Single Mode (SM) and Multi Mode (MM) Fiber Optical

Max. No. of Connectors 96; Connector Type ST, FC, SC, APC, MTP, SMA, E2000, Other; Radius of Curvature 7-30 mm; Apex Offset <50 µm; Undercut/Protrusion <50 nm; Back Reflection -35—65 dB; Automated Fiber Stub Removal Nanometer Technologies’ ACP-24/96 is an automated connector polisher with touchscreen technology for easy use and includes an ASR automated stub removal fiber optic polisher. The ACP-24/96 can polish many types of industry-standard, military and custom connectors. With the ACP-24/96 you can automate polishing times, pressure and motor speeds for each step. Complete polishing procedures are stored inside of the ACP-24/96 to save time and ensure repeatability. Create, save, and recall custom polishing procedures for custom jobs. Polishing procedures can be saved to a computer for easy back-up or for transferring to another ACP-24/96. The ACP-24/96 utilizes Nanometer Technologies’ patented figure 8 polishing pattern that creates an angle of attack on the connector end face that changes 720°, 60 times a second, giving optimal connector end face geometry. The system is compatible with all MCP-24 and MCP-48 polishing fixtures, supporting up to 96 connectors at a time. It includes the ASR system for automated stub removal – no more removing fiber stubs by hand. ASR works with Nanometer Technologies' polishing fixtures reducing the need to purchase special fixture plates. Key Features: Polish 96 LC Connectors at a Time Polish 24 MT Connectors at a Time ASR Automated Fiber Stub Removal Automatically Removes 96 Fiber Stubs in 1 min Change Polishing Times, Pressure and Motor Speed 30 Factory-preset Polishing Recipes for All Types of Connectors Easily Create and Save Custom Polishing Procedures Accurate Control of Pressure, Speed and Time 7” Touchscreen Interface for Easy Use, Touchscreen is Both Water and Chemical Proof Patented Figure 8 Polishing Pattern Designed for High-volume Single Mode (SM) and Multi Mode (MM) Polishing Consistent High-yield Repeatable Performance Works With Existing MCP24 & MCP 48 Fixtures Radius of Curvature: 7 to 30 mm Apex Offset: <50 µm Undercut/Protrusion: <50 nm Back Reflection: PC -45 dB, UPC -55 dB, APC -65 dB, Multi Mode -35 dB Maximum Connector Load: 96 Dimensions: 368 x 375 x 356 mm Weight: 16.9 kg Applications: High-volume Polishing of Single Mode (SM) and Multi Mode (MM) Fiber Optical

5 inch Disc; Silicon Dioxide; Ceramic Ferrule; no PSA The ADS film can be used for final polishing for optical fiber connector end-face. The ADS film offers longer life cycle for the optical connector polishing. NTT Advanced Technology’s ADS series of final polishing films is ideal for the final polish of optical connector end faces and offers longer polishing life cycles. These films polish the end face of an optical connector without scratches, residues or contamination on the ferrule end face. ADS-NEXT polishing films feature stable polishing force while maintaining final finish performance and achieving an extended life-span. This series of final polishing films attains a high-performance polish with distilled water. Another feature of the ADS-NEXT series is a sharp improvement in the indentation problems that occur especially in 1.25 mm diameter ferrules from repeated use polishing. Even after many usages, ADS-NEXT can still protect against sudden occurrences of fiber indentation. ADS-MPO series is a new generation of polishing films that has been improved for MPO connector end faces to realize a finishing quality equivalent to that of single fiber polish, leaving no scratches or dirt while at the same time their stable polishing power ensures long life. These films can polish to a convex shape to eliminate dips in the core (Coredip value of “0”) which particularly affects the optical characteristics (IL/RL) of multi mode fiber. APS-MPO final polishing films also realize low return loss, comparable to single connectors, by suppressing subsurface damaged layer to a minimum. With a base thickness of 75 µm, they are available in disc and sheet types. Key Features: Ideal for Final Polish of MPO Optical Connector End Face High Stability and Long Product Lifetime Prevents Excessive Fiber Undercut after Repeated Use (ADS/ADS-NEXT) Multi Mode Fiber Coredip Value of “0” (ADS-MPO) Low Return Loss Comparable to Single Mode Fiber Connectors (ADS-MPO) Compatible with 1.25, 2.5 mm Diameter Zirconia Ferrules (ADS/ADS-NEXT), MPO Ferrule, All Types (ADS-MPO) Compatible with Multi Mode (OM1/2/3/4, GI50/62.5, etc.) and Single Mode (OS1/2, SM, etc.) Fiber (ADS-MPO) Disc Type (5.0 inch, 127 mm Diameter), Sheet Type (5.5 x 5.5 inch, 140 x 140 mm, ADS-MPO) and Roll Type (5.5 inch, 140 mm x 12 m, ADS/ADS-NEXT) Available Applications: Final Polish of Fiber Connector End Face

5 inch Disc; Silicon Dioxide; Ceramic Ferrule; no PSA NTT Advanced Technology’s ADS series of final polishing films is ideal for the final polish of optical connector end faces and offers longer polishing life cycles. These films polish the end face of an optical connector without scratches, residues or contamination on the ferrule end face.