PBCS-X Polarization Beam Combiners/Splitters

Fused; Fiber Type DC (Nufern SM-9/105/125), MM (Nufern 105/125, 250), SM (SMF-28); 1250-1700 nm; Number of Legs 1x2, 2x2; SM IL ≤0.5-≤3.7 dB; Dimensions Ø2.9x50.8 mm Gooch & Housego’s (G&H) 18-X series of fused dual-clad fiber (FDCF) couplers and optical splitters offers a high coupling efficiency for multi mode (MM) fiber over a broad wavelength range with a low wavelength dependent loss. Light launched in the single mode core of the input single mode (SM) fiber or dual-clad (DC) fiber will transmit 100% through G&H’s 18-XXXXX-XX-XXXXX series FDCF coupler directly to the inner core of the output DC fiber, while light launched in the inner cladding of the DC fiber will couple to the multi mode (MM) fiber with at least 50% coupling efficiency depending on the core size of the MM fiber as a bigger MM fiber (i.e. 250 µm core) results in a higher coupling transmission percentage (70% or higher) to the MM fiber. As different DC fibers have different operating wavelength ranges, proper choice of SM fiber is very important for building a high-performance FDCF coupler. The typical 2x2 FDCF couplers have DC fiber in two opposite leads and MM fiber in the other two arms. The DC input fiber can be optionally replaced with a matching SM fiber and the MM output fiber can be terminated to form a 2x1 FDCF coupler. Key Features: Broad Wavelength Range: 1250 to 1700 nm 100% Transmission for single mode (SM) Fiber Input High Coupling Efficiency to Multi Mode (MM) Fiber Low Wavelength Dependent Loss Fiber Type: Double Clad (DC, Nufern SM-9/105/125 µm), Multi Mode (MM, Nufern 105/125 µm, Nufern 250 µm), Single Mode (SM, SMF-28) Number of Legs: 1x2, 2x2 Single Mode (SM) Insertion Loss (IL) for Port 1 -> Port 3 (Core): ≤0.5 dB Single Mode (SM) Insertion Loss (IL) for Port 1 -> Port 2 (Core): ≤2.5, ≤3.7 dB Dimensions: Ø2.9 x 50.8 mm Applications: Instrumentation; OCT Systems; Gyroscopes; Test and Measurement; Sensors

Fused, Visible Wavelength RGB; Fiber Type Panda PM; 400-680 nm; Number of Legs 1x2, 2x2; Splitting Ratio 50/50 to 1/99; IL 0.6-25 dB; Dimensions Ø2.9x40-Ø5.5x34 mm Gooch & Housego’s fused pure silica (52-X67 - XX-XX-XXX0 X) or visible wavelength RGB (52-X65 XX-XX-XXXXX), fiber-based, polarization maintaining (PM), 1x2 and 2x2 fiber optic couplers, taps and optical signal splitters offer high extinction ratio (ER) with polarization launch into a single or dual axis (slow axis and fast axis). Gooch & Housego (G&H) utilizes a proprietary, proven fused biconical taper (FBT) process to manufacture high-grade PM couplers, offering high extinction ratio with minimum optical loss. G&H selects PM fiber from different suppliers to accommodate your application-specific operating wavelengths. These high-quality PM couplers are manufactured mainly using panda fiber which guarantees a high polarization extinction ratio (PER). Operating wavelengths range from 400 nm to 680 nm, and coupling ratio offerings range from 50/50, 20/80, 10/90, 5/95 and 1/99 etc. Other coupling ratio options are available upon request. 52-X6X PM fiber couplers are available in several mechanical package options with multiple connector options like FC/PC, FC/APC etc. Key Features: Operating Wavelength Range: 400 to 680 nm High Polarization Extinction Ratio (PER): ≥18, ≥20 dB Polarization Launch into a Single or Dual Axis (Slow and Fast) Coupling Ratio: 50/50, 20/80, 10/90, 5/95, 1/99, Other Ratio Options on Request Number of Legs: 1x2, 2x2 Low Excess Optical Loss: <0.5 to <1.2 dB Insertion Loss (IL): 0.6 to 25 dB Very Low Polarization Dependent Loss (PDL) Low Back-reflection – Return Loss (RL): ≥30 dB High Isolation High Reliability Power Handling: ≤500 mW Small Size: Ø2.9 x 40 to Ø5.5 x 34 mm Made Using Gooch & Housego’s Proven High-reliability FBT Process Applications: Aerospace; Telecom; Sensors; WDM Systems; Defense; Gyroscopes; Medical

Fused, Broadband; Fiber Type Panda PM, Bow-tie; 800-960 nm; Number of Legs 1x2, 2x2; Excess Loss <0.5 dB; PER ≥18, ≥20 dB; Dimensions Ø2.9x40, Ø3.9x50.8 mm Gooch & Housego’s 53-X89 series of broadband, fused, polarization maintaining (PM) fiber optic couplers, taps and optical signal splitters offer high extinction ratio (ER) with polarization launch into a single or dual axis (slow axis and fast axis). Gooch & Housego (G&H) utilizes a proprietary, proven fused biconical taper (FBT) process to manufacture high grade PM couplers including single wavelength and wavelength flattened (broadband/wideband). G&H’s fused PM fiber couplers/splitters offer high ER with minimum optical loss. Gooch & Housego selects PM fibers such as Panda and bow-tie from different suppliers to accommodate your application-specific operating wavelengths. Fused PM couplers usually operate over a certain wavelength band of ±20 nm. G&H’s latest innovative FBT wavelength flattening technology has expanded the operating wavelength band up to 50 nm, with performance comparable to G&H’s single mode (SM) WFCs (wavelength flattened couplers). G&H’s 53-X89 XX-XX-XXXXX fused broadband PM couplers are small in size and exhibit a flat coupling ratio response over a broadband of wavelength ranges. Splitters are available in a variety of coupling/splitting ratios. Key Features: Ultra-broad Bandwidth Operating Wavelength Range: 800 to 960 nm High Polarization Extinction Ratio (PER): ≥18, ≥20 dB Polarization Launch into a Single or Dual Axis (Slow and Fast) Number of Legs: 1x2, 2x2 Low Excess Optical Loss: <0.5 dB Without Connectors Excellent Uniformity Low Wavelength Dependent Loss High Directivity Dimensions: Ø2.9 x 40, Ø3.9 x 50.8 mm Applications: Instrumentation; OCT Systems; Gyroscopes; Test and Measurement; Sensors

Single Mode Couplers & Combiners, All Band; 1260 to 1620 nm; Coupling Ratio 1/99 to 50/50; Directivity ≥55 dB; Fiber Type SMF-28e, others LightComm Technology builds its ABC all band coupler series using a special technique. The operating bandwidth of the couplers is expanded to 1260 nm to 1620 nm, and the devices feature low excess loss and low PDL. Key Features: Low Excess Loss Low PDL All Band Operating Wavelength High Stability and Reliability Applications: Optical Communication Systems; CATV; FTTH

PM or SM Splitters/Combiners; 1550 nm, Other; Splitting Ratio 50/50-90/10; PDL ±0.25 dB; Directivity >50 dB OZ Optics’ fiber optic beamsplitters are used to divide light from one fiber into two or more fibers. Light from an input fiber is first collimated, then sent through a beam-splitting optic to divide it into two. The resultant output beams are then focused back into the output fibers. Both 1xN and 2xN splitters can be constructed in this fashion with as many as eight or more outputs, with both low return losses and low insertion losses. Standard parts available in this series are FOBS-12P (1x2) and FOBS-22P (2x2) pigtail-style splitters, FOBS-12 (1x2) and FOBS-22 (2x2) receptacle-style splitters, as well as LDBS-12P (pigtail-style) and LDBS-1 (receptacle-style) laser diode to fiber splitters, and finally ULBS-12P (pigtail-style) and ULBS-1 (receptacle-style) laser to fiber splitters This design is extremely flexible, allowing to use different fiber types on different ports, and different beamsplitter optics inside. Custom designs combining circulators, polarizing splitters and non-polarizing splitters in the same package are routinely manufactured. Splitters can be made with either fibers permanently attached to each port (pigtail style) or with receptacles on each port that one can plug your fiber into (receptacle style). OZ Optics can also build source to fiber couplers with built-in beamsplitters for either laser or laser diode sources. Contact AMS Technologies for details. If size is a concern, we recommend that you consider OZ Optics’ miniature line of splitters. Within OZ Optics’ series of beamsplitters and combiners, the two most common types of splitters offered are polarizing beamsplitters and polarization maintaining (PM) beamsplitters. Polarizing beamsplitters split incoming light into two orthogonal states. They can also be used to combine the light from two fibers into a single output fiber. When used as a beam combiner, each input signal will transmit along a different output polarization axis. PM splitters use a partially reflecting mirror to transmit a portion of the light from the input fiber to the main output fiber and reflect the remainder of the light to the second output fiber. All ports made using polarization maintaining fiber are aligned so that polarized light aligned parallel to the stress rods on the input fiber emerges from the output fibers in the same manner, maintaining the polarization state to a high degree. Splitters that only split off a small portion of the input light are commonly known as taps and often used for power monitoring applications. For a very cost-effective alternative configuration, combining the functions of a tap and monitor photodiode in a single unit, we invite you to review OZ Optics’ OPM series of inline optical taps and monitors. Key Features: High Power Handling High Extinction Ratio Highly Modular and Flexible Design Wide Wavelength Range Bi-directional Broadband Performance Custom Designs Welcomed Mode-independent Behavior in Multi Mode (MM) Fiber Applications Splitting Ratio: 50/50 Standard, Custom Split Ratios 50/50 to 95/5 Available on Request Splitting Ratio Tolerance: ±3% (50/50 Splitters), ±2% (90/10 Splitters) Central Wavelength: 1550 nm Standard, Other Wavelengths on Request Bandwidth: ±1.5% of Central Wavelength Wavelength Dependent Loss (WDL): 0.1 dB (1520-1570 nm) Polarization Extinction Ratio: 20 dB Min., 23 dB Typ. (630-1600 nm), 17 dB Min., 20 dB Typ. (400-630 nm) Polarization Dependent Loss (PDL): ±0.25 dB Directivity: >50 dB Return Loss (RL): 30 dB to 60 dB Insertion Loss (IL): <0.5 dB to <1.0 dB Power Handling: >1 W (+30 dBm) Operating Temperature Range: 0°C to +70°C Applications: EDFA Amplifier; Raman Amplifier Combiner; Polarization Mode Dispersion Compensation; Polarization Extinction Ratio (PER) Measurements; Fiber Optic Sensors; Coherent Communication Systems; Quantum Cryptography; Return Loss (RL) Measurement

Single Mode Couplers & Combiners, Dual Window, Standard / Mini Size; 1310 or 1550 nm; Coupling Ratio 1/99 to 50/50; Directivity ≥55 dB; Fiber Type SMF-28e, others LightComm Technology’s series of dual window couplers (DWC) is built with asymmetric coupling technique. The operating bandwidth of the normal couplers is expanding to ±40nm, while the ultra broadband coupler is expanding to ±80nm. The DWC coupler has the same coupling ratio on both 1310 nm and 1550 nm communication windows, and with low excess loss and low PDL. DWC couplers are widely used for communication systems, CATV, and FTTH. The mini size DWC is designed for compact optical modules and communication systems. Key Features: Low Excess & Insertion Loss Standard & Mini Size Low PDL Dual Operating Window High Stability and Reliability Applications: Optical Communication Systems; CATV; FTTH; Mini Size EDFAs; Mini Size Transmitter/Receiver Modules; Optical Communication Systems; Testing Instruments

Fused; Fiber Type SM; 450-1599 nm; Number of Legs 1x2, 2x2; Splitting Ratio 1/99,999-50/50, Other; Fiber Length 0.5, 1 m; RL ≥50 dB; Dimensions Ø3.0x50/60, Ø5.0x75, 80x10x8, 5x5x85 mm Gooch & Housego’s FFS-X series of single mode (SM) fiber couplers split or combine light in the visible or (near) infrared regions. The couplers utilize Gooch & Housego’s (G&H) low-loss fused fiber technology. No light leaves the fiber, therefore no alignment is required and there are no unwanted reflections. Furthermore, the output fiber pigtails may be directly integrated into beam delivery systems. Visible Wavelength SM Fiber Couplers:Within the FFS-xxxxxxxxx series of visible wavelength fiber couplers, versions optimized for any wavelength within the range of 450 to 700 nm may be selected. These couplers are designed for applications in display systems, sensors and biomedical equipment. Near Infrared SM Fiber Couplers:G&H’s FFS-xxxxxxxxx series of near infrared couplers splits light at any selected wavelength from 700 to 1199 nm. These couplers are designed for applications in fiber laser, sensor and avionics applications. Ultra-low Ratio Tap SM Fiber Couplers:G&H’s FFS-xxxxxxAxx series of ultra-low ratio tap couplers splits a very small amount of light from a signal path to a tap port. Suitable for very high optical power, its main application is in the monitoring of optical sources such as fiber lasers. Low tap ratios such as 0.1%, 0.01% or 0.001% enable the monitoring photodetector to operate without damage or saturation. Gooch & Housego proprietary manufacturing technology provides ultra-low loss in the signal path, thereby maximizing optical power handling. Consistently high return loss (>55 dB) reduces the amount of optical power reflected back along the input fiber. This helps the fiber laser operate in a stable manner. Standard ultra-low ratio parts are available for wavelengths from 700 to 1599 nm. For other wavelengths, coupling ratios or customized fiber types please contact AMS Technologies. Key Features: Available at Wide Variety of Operating Wavelengths: 450 to 1599 nm Coupling Ratio: 1% to 50%, Plus 0.1%, 0.01% and 0.001% Ultra-low Coupling Ratio Versions All Fiber – No Lens Alignment Required No Unwanted Reflections High Return Loss (RL): ≥50 dB (Ultra-Low Coupling Ratio Versions) High Optical Power Handling: 4 W Fiber Type: Specialty Single Mode (SM) Fiber Number of Legs: 1x2, 2x2 Pigtail Length: 0.5, 1 m Custom Designs Available Connector Type: FC/PC, FC/APC, SC/APC, FC/UPC, SC/UPC, LC, None Dimensions: Ø3.0 x 50/60, Ø5.0 x 75, 80 x 10 x 8, 5 x 5 x 85 mm Applications: Visible and Display Systems; Fiber Lasers; Sensors; Raman Amplifiers; High-power EDFAs; Avionics; Biomedical Equipment; Research