miko Miniature Recirculating Chillers

Cooling Capacity 200-3,000 W @+20 °C; Process Fluid Flow Rate 0.5-22 lpm @≤8 bar; 3/8” Stainless Steel Fittings; Temperature Stability ±0.1 K; Coolant Temperature 10-35 °C Termotek has been highly successful on the market with the P300 active cooling systems for many years. The P300 recirculating chillers have consistently proven their worth particularly in laser cooling, medical and laboratory equipment applications thanks to outstanding reliability, precise control and a temperature stability up to ±0.1 K. Upon request, the 19" plug-in cooling units can also be supplied as desktop units. The P300 is an active system using a compressor refrigeration circuit that cools either a stainless-steel evaporator coil in the cooling water tank or a plate heat exchanger. Its capacity ranges between 200 W and 3 kW. The standard cooling medium is deionised water. The conductance can be conditioned with the aid of a corresponding DI cartridge, if desired. The central control system of the P300 monitors the water temperature as well as the processes in the refrigerant circuit. A particle filter in the outlet of the cooling unit and a flow sensor in the return flow ensure trouble-free, reliable operation. The heat is dissipated via a fan or transferred to an existing water supply via a heat exchanger for further use. Key Features: Extremely High Level of Temperature Stability: ±0.1 K Low Maintenance Low Noise and Vibration Levels High Level of Reliability Cooling Capacity: 200 W to 3 kW Flow Rate: 0.5 to 22 l/min @≤8 bar Flow Rate Measuring and Monitoring Compact 19” Rack Enclosure or Table-top Design Height: 4 to 12 HU (Height Units) Designed for De-ionized Water Customized Alarm Dry Contacts Via 9-pole Sub-D on Rear Panel Fluid Connections: 2x 3/8” Stainless Steel Coolant Water Outlet: +10 to +35 °C Water Filter Externally or Internally Mounted, Various Filter Grades Available Water Level Display Water By-pass Fan Speed Control RS232 Interface 24 VDC Remote Start Signal 50/60 Hz Design Refrigerant: R134a Applications: Cooling of Lasers, Medical and Laboratory Equipment

Sensor Size 4 x 4 - 100 x 80 mm; 350-1100 nm; Power Range 1-2,500 µW; Position Resolution 0.1-100 µm; Position Accuracy 25-1,000 µm; Interface Analog, USB 2.0, Mobile Lasers propagating through space have a perfect line trajectory. Using this quality, combined with a position sensor capable of measuring perpendicularly to the propagation direction, Duma Optronics’ comprehensive series of beam positioners yields a perfect system for straightness and alignment. Many applications such as machine straightness measurement, alignment of optical systems, vibration and quality control are enabled by combining the system with the powerful computing capability of today. Optical beam position measurements can be done by a variety of sensor heads, including CCD or miniature and large-area PSD. Duma Optronics offers a variety of sensor head sizes to accommodate numerous application needs. Position sensing provides measurements of optical beam location on a detector surface, and also provides absolute power measurements. Duma Optronics’ series of laser beam positioners are measuring accurately down to fractions of a micron, wherein lower resolution allows measurements over wide areas up to 100 mm. This series includes various detector types such as lateral effect, centrally perforated four-quadrant in 4 x 4 mm up to 100 mm size, and CCD. SpotOn Analog: A complete solution for fast and extremely accurate beam positioning. The system measures both optical beam position and power. Download datasheet SpotOn Mobile: High-accuracy compact beam positioning system with Nexus7 PC tablet included. Download datasheet LaserOn: Compact visible laser diode (635 nm) with built-in screws for fine beam direction adjustment. Completing usage for positioning. Download datasheet SpotOn LA: Large aperture beam positioning system for applications exceeding 100 mm of beam positioning area. Download datasheet SpotOn USB 2.0: A portable, fast and accurate optical beam positioning system (down to 0.1 µm) featuring a USB 2.0 interface. Download datasheet Key Features: Complete Line of Laser Beam Positioning Various Detector Types: Lateral Effect, Centrally Perforated Four-quadrant, CCD Simultaneous Operation of Several Detectors Fast Acquisition up to 60 kHz Calibrated Lasers for Alignment Reference Applications: Machine Straightness Measurement; Alignment of Optical Systems; Vibration Measurement; Quality Control

High Speed; Fiber Type SM, PM, RC; 780-1625 nm; Fiber Length 5-17 m; Fiber Stretch 0.035-0.21 µm/V; Fiber Leads 1 m, 0.9 mm OD Jacket; Connector Type Bare Fiber, FC/PC, FC/APC The PZ1 series are the high-speed members of Optiphase’s family of fiber stretchers. At the core of the PZ1 high-speed fiber stretchers is a fiber wound piezoelectric element for use in a wide range of optical interferometric measurement and sensing system applications. Optiphase’s expertise in the design, manufacture and use of all-fiber interferometers has produced a unique multi-layer winding approach resulting in an enhanced modulation function while maintaining a high operational frequency. PZ1 high-speed fiber stretchers are available with single mode (SM), commercial polarization maintaining (PM, Panda or Bowtie) or SM reduced cladding (RC) fiber types PZ1 high-speed fiber stretchers deliver a high performance to cost ratio, exceeding all other known competitive devices. The compact and low-profile form factor makes the PZ1 series easily configurable into small spaces. In addition, Optiphase fiber stretchers are unique in that they do not require proprietary drivers. For most low-voltage applications (<±15 V), Optiphase stretchers can be driven by standard electronics such as signal generators, op-amps or other laboratory equipment without modification. For more information on how to drive PZ1 high-speed fiber stretchers see the downloadable application note. Key Features: High Speed Compact Package Fiber Type: Single Mode (SM), Polarization Maintaining (PM )or Reduced Cladding SM (RC) Fiber Multiple Termination Choices Unique Multi-layer Winding Can Be Driven With General Purpose Electronics Operational Wavelength: 780 to 1625 nm Fiber Stretch: 0.035 to 0.21 µm/V Optical Path Displacement (n = 1): 0.05, 0.2, 0.3 µm/V Time Delay: 0.00017 to 0.001 ps/V Fiber Length: 5, 12.3, 17 m Inclusive Fiber Wind: 4 Layer (1 Layer PM Version Available) Optical Loss: ≤0.5 dB Maximum Voltage Range: ±500 V (Off Resonance, 1,000 V Peak-to-Peak) Fiber Leads: 1 m, 900 μm Loose Tube Connector Type: Bare Fiber, FC/PC, FC/APC Dimensions: 50.8 x 50.8 x 21.6 mm Applications: Open Loop Demodulation; Sensor Simulation; Variable Optical Delay; General Purpose Fiber Interferometry; Large-angle Modulation of Interferometric Phase

Optical Deflection ±0.393 rad; Processing Speed 30-100 rad/s; Positioning Speed 30-100 rad/s; Input Aperture 10, 14, 20 mm; Digital Control via SL2-100 or XY2-100 Protocol Raylase’s MINISCAN III 2-axis deflection units offer very stable digital control, which further improves noise and drift values, thereby making the systems even more reliable and robust. Both the XY2-100 16 Bit and the SL2-100 20 Bit protocols can be used for digital control with the digital interface. A corresponding cable defines the use of the protocol. Lenses, protective glass, and mirror substrates and coatings are available for many standard laser types, wavelengths, power densities, focal lengths and processing areas. This allows to handle a wide range of tasks with best quality and optimized throughput. Speed and dynamic responses are guaranteed, thanks to digital control and powerful PWM output stages. We would also be happy to help you put together the perfect configuration for your application – get in touch with the AMS Technologies deflection experts now to discuss your project’s requirements! Key Features: Digitally Controlled, Low Noise and Drift Control: Via SL2-100 Protocol 20 Bit or XY2-100 Protocol 16 Bit Robust and Dust-proof for Industrial Applications Various Mirror Substrates and Coatings for Marking, Hatching (AM SLM / SLS) and Cleaning Available Input Apertures: 10, 14, 20 mm Optical Deflection (typ.): ±0.393 rad Resolution XY2-100, 16 Bit: 12 µrad Resolution SL2-100, 20 Bit: 0.76 µrad Repeatability (RMS): <2.0 µrad Position Noise (RMS): <3.2, <4.5 µrad Max. Temperature Drift: 15 ppm/K Gain, 10 µrad/K Offset Long-term Drift (8 h): <80 µrad Beam Displacement: 12.4, 17, 26 mm Tuning: M, MA, VC, C Writing Speed with High/Good Writing Quality: 600 to 1000 cps Processing Speed: 30 to 100 rad/s Positioning Speed: 30 to 100 rad/s Tracking Error: 0.13 to 0.34 ms Step Response Time (@1% of Full Scale): 0.30 to 1.01 ms Power Supply: +30/+48 VDC, 2 A RMS, max. 5 A Temperature Range: +15°C to +35°C Protection: IP64 Dimensions: 100.0 x 77.0 x 81.5/83.0 mm, 134.0 x 98.0 x 100.3 mm, 145.0 x 116.0 x 103.5 mm Weight (w/o Objective): Approx. 0.9, 2.0, 2.5 kg Applications: Hatching of Surfaces in Additive Manufacturing with High Dynamic Performances; Ablation and Cleaning of Surfaces at High Speed; Challenging Marking Tasks

mini Liquid Cooling Evaluation Kit; Cooling Capacity 450 W @+25°C; Power Supply 24 VDC Key Features: Up to 450 W Cooling Capacity Ideal for Compact Cooling of Lasers or Bio Reagents Ideal for Mobile Cooling Applications Compressor Speed Control for Ease of Temperature Control Low Vibration, Low Noise Lightweight, Compact Easy to Integrate Kit to Interface With OEM Water Circuit and Electronics Control Components Carefully Designed to Match Each Other The mLC-C-450-24-KIT is a sealed vapor compression circuit with a speed controlled miniature rotary BLDC compressor. The evaporator is a brazed plate heat exchanger, the interface to the customer liquid coolant circuit.  The mLC-C-450-24-KIT comes with the separate 24 VDC inverter board. The compressor speed can be set from the upper control system by frequency or analog signal. The condenser is an aluminum finned copper tube heat exchanger coil and must be cooled by forced convection, i.e. a 120x120 mm fan or equivalent. The heat exchanger stainless steel plates are nickel brazed suitable for a variety of coolant fluids, such as water, DI water and glycol-water mixtures. The plate heat exchanger has male R ¼” connectors for the customer to connect its water circuit. The mLC-C-450-24-KIT’s condenser is an aluminum finned copper tube heat exchanger coil and must be cooled by forced convection, i.e. a 120x120 mm fan or equivalent. The heat exchanger stainless steel plates are nickel brazed suitable for a variety of coolant fluids, such as water, DI water and glycol-water mixtures. The plate heat exchanger has male R ¼” connectors for the customer to connect its water circuit. If you are looking for a ready-to-use recirculating chiller based on this mLC-Kit that includes the coolant loop, have a look at our mRC-C-450-100/240 mini Recirculating Chiller as well as our other liquid cooling solutions offerings – or browse our large portfolio of liquid to air temperature management assemblies. For lower cooling capacities, we also carry a Peltier-based mini Direct Cooling KIT providing up to 130 W with no liquids or moving parts (except fans). Your customized liquid cooler: AMS Technologies’ thermal management specialists are happy to develop a liquid cooling solution tailored to your needs – based on Peltier or compressor technology – and offer all services from development and proof-of concept to series production. Get in touch with us now to discuss your customized liquid cooler. Specifications: Cooling Capacity: Approximately 450 W (at 100 rps, Twater = +25°C, Tambient = +25°C) Power Supply Consumption: < 150 W (6 A @24 VDC, 80 rps) Temperature Range (Ambient, Operating): -10°C to +45°C Hydraulic Parameters: Pressure Drop 30 kPa @4 lpm Controller/Inverter Board: Operating Range 20 to 100 rps, Speed Command Square Wave Pulse Frequency 40 to 200 Hz, Variable Resistor Input 2 kΩ to 10 kΩ Dimensions: 200 x 172 x 180 mm (WxHxD) Weight: 3.4 kg Applications: Compact Cooling of Lasers or Bio Reagents With up to 450 W Cooling Capacity; Mobile Cooling Application; Evaluation Kit to Interface With OEM Water Circuit and Electronics Control