mDC-T-130-24-KIT Thermoelectric Plate-To-Air Cooling Kit

LC/APC; Bore 125 µm; Ferrule Outer Diameter 1.25 mm; Bore Tolerance 0/+1 µm; Crimp 3 mm You may also need the connector boot and crimp, check here for the boots and here for the crimps. Further connectors are available. Please check here the whole offer.

Vapor Compression Chiller; 450W @+25°C; 230VAC; 2lpm; USB/ Ethernet; Benchtop Key Features: Miniature Recirculating Water Chiller Compact Size, Easy to be Integrated in Customer Application User-Definable PID Parameters and Fan Velocity Calm Operation With Low Vibration and Noise Ideal for Water Cooling Tasks up to 450 W IoT Ready: Remote Operation, Monitoring and Service over Integrated Ethernet Interface Full chiller power in a shoebox form factor: the mRC-C-450-100/240 mini recirculating chiller provides to 450 W cooling capacity and contains a compressor-based refrigerant circuit as well as a closed, recirculating coolant (water) circuit that is pressurized – all that in a compact, 350 x 290 x 230 mm housing. This small size is enabled by utilizing a miniature rotary compressor, customized miniature evaporator and condenser. On the coolant side, pressurizing the circuit allows a very small tank, and a compact centrifugal pump also contributes to reduced space requirements. Due to the speed-controlled compressor, the mRC-C-450-100/240 chiller offers low vibration and noise throughout the compressor’s BLDC speed range. Further features are automatic fill and drain of the coolant circuit, global operability due to a universal 90 to 264 VAC power supply, and an integrated Ethernet interface allowing remote operation, monitoring and service. Specifications: Cooling Capacity: 300 W (Twater = +20°C, Tambient = +40°C) to 500 W (Twater = +20°C, Tambient = +20°C) Temperature Stability: +2/-1.5 K Over-/undershoot at 250 W Heat Load ON/OFF, Down to 0.05 K Continuous Operation Available Pressure Head: 1.5 bar @1 lpm; 0.5 bar @5.5.lpm Noise Level: 63 dBA (fan 40%, compressor 100%) Control: Local, USB/Serial, Internet (Web Browser) via Ethernet (IoT Ready) Interlock I/O Alarms: Liquid Level, Tank Pressure, Coolant Feed Temperature, Coolant Flow Rate, Condenser Pressure Power Supply: 90 to 264 VAC, 24 VDC Derivative Available on Demand Power Consumption: <300 W Dimensions: 350 x 280 x 230 mm, Main Body Without Filter Weight: 13 kg Approval: CE Applications: Water Cooling of Lasers and Other Applications; Integration of Water Cooling Capabilities in Systems with Limited Space  

Fan Distance Frame with holes, Material: POM, black, dim. 92x92x25mm.

Cabinet Cooler - 60W Cooling Capacity - TEC based – 120-12-AA

Interchangeable Fixtures for Connectors, Waveguides, Bare Fibers, Other; Film Size 4 Inch Diameter; Capacity up to 8 Components; Connector Apex Offset <50 µm; Connector Radius of Curvature 5-25 mm; Connector Protrusion/Undercut: 50--120 nm KrellTech’s NOVA™ automated polishing system provides maximum flexibility for optical surface processing and supports a variety of polishing applications from connectors to waveguides, and bare fibers to custom components. NOVA™ is scalable for R&D projects, high-volume production and the rigors of harsh environments and field installation. NOVA™ workholders feature KrellTech’s patented independent suspension at each connector position for controlled pressure and uniform contact. Combined with NOVA’s Microfeed™ fixture advancement, connector “airpolishing” and epoxy removal can be performed directly in the machine. Each position is optically aligned for optimal polish geometry using KrellTech’s patented process and calibration mechanism. Connector types can also be mixed and matched in a single fixture. NOVA’s versatility provides the ability to support the polishing of many photonic components. A quick change-out of workholder fixtures provides processing capability for waveguides, optical chips, PLCs, lenses and fiber arrays. Workholders utilize a unique holding mechanism that can secure a wide range of component dimensions. The polishing angle is adjustable and custom fixtures can be fabricated for specialized applications. Bare fiber can be polished at variable angles using specialized workholders and adapters. A variety of fiber types from standard single mode (SM) to polarization maintaining (PM) and sapphire to PCF can be processed into wedge and chisel tip shapes. A quick swap-out of adapters allow the polishing of fiber diameters from 80 um to >3 mm. NOVA™ features an intuitive user interface for creating polishing programs. All parameters including cycle time, pressure and speed settings are easily inputted for all component types and desired surface geometries. A unique “manual mode” allows the adjustment of polishing parameters in real-time during NOVA™ operation. This feature streamlines process development efforts and facilitates easy and quick program creation and refinement. A new NOVA™ operation software kit is available that upgrades NOVA™ polishers with the enhanced microfeed feature. This polishing routine provides greater programming flexibility for advancing components to the polishing surface at slower and more controllable rates. While version 1 NOVA™ software was limited to 10 pre-programmed microfeed rates, with the slowest being 100 µm/s, version 2 software allows to customize rates as slow as 5 µm/min. This yields precise removal of material stock and continual component advancement. The enhanced microfeed is ideal for larger optical surfaces, delicate bare fibers, and connector air polishing. V2 also provides the ability to create "pop-up" window prompts in between each polishing step, very useful as reminder to technicians to clean fibers, inspect polishing lengths, confirm geometry, etc. before initiating the next process step. New folder management allows programs to be organized according to connector types, fiber diameters, component, etc. Bare Fiber Coning and Chisel Option The optional Orbit™ bare fiber coning and chisel system enhances NOVA™'s bare fiber processing with conical and chisel tip shaping. Unique fiber tip geometries can be formed for lensing, sensing and light guiding applications. The fiber rotation module can be mounted on standard NOVA™ variable angle and waveguide workholders. Fiber "spin" speed is user adjustable and can be set for continual rotation or the unique "360 auto-reverse" motion that prevent fiber twisting and torquing. All variables are entered and selected via a touchscreen on the Orbit™ controller. When combined with NOVA™ Auto-Angle Workholders, Orbit™ precisely positions the polishing fixture at the designed angle on a repeatable basis. Inspection Options Optional video inspection systems monitor the polishing process and inspect the polished surface directly in NOVA™.  NOVA™'s Profile Videoscope allows the real-time monitoring of component polishing. This videoscope aids with bare fiber/component positioning and confirms process completion. Teamed with measurement software, this system verifies the endface geometry of a broad range of photonics components. Teamed with measurement software, this system verifies the endface geometry of fibers, waveguides and arrays. NOVA™'s Surface Videoscope allows the in-line inspection of polished surfaces while the component is still loaded in the polisher. This minimizes material handling and streamlines photonic production compared to the traditional process of transferring components to off-line inspection stations. Polishing and specification compliance can be determined in a single workcell. Key Features: Precision Optical Polishing Wireless Tablet Control With Microfeed™ Telcordia Compliant Interchangeable Fixtures for Waveguides, Bare Fibers and More Air Polishing Machine Polishing Pressure: Programmable & Automated, Linear Displacement With Micron Positioning Control Polishing Speed and Cycling Time: Program Selectable Polishing Motion: Random Orbital Polishing Routines: Programmable (Step by Step Prompts), Microfeed™ Controlled Advancement, Manual Mode With Full Process Control Film Size: 4 Inch Diameter Connector Support: All Industry Standard Connectors, MIL-spec Termini and Ferrules, UPC & APC Geometries Connector Capacity: Up to 8 Components – Selections Can Be Mixed & Matched in Same Workholder Fixture Connector Apex Offset: <50 µm Maximum, <15 µm Typical Connector Radius of Curvature: 10 to 25 mm (2.5 mm Ferrules), 7 to 20 mm (1.25 mm Ferrules), 5 to 12 mm (APC Ferrules) Connector Protrusion/Undercut: 50 nm to -120 nm Connector Back Reflection: <-60 dB (UPC), <-65 dB (APC) Connector Insertion Loss: <0.25 dB Typical Connector Process Time: Approximately 15 s/Connector Waveguide Component Support: Waveguides, Planar Lightwave Circuits, Optical Chips, Fiber Arrays Waveguide Component Dimension Range: Width 5 to 30 mm, Thickness 0.5 to 5 mm, Length >5 mm Waveguide Angle Repeatability: ±0.3° (X/Y Axis Along Edge) Waveguide Adjustable Polish Angle Range: 0° (Flat) to 45° Fiber Type Range: Single Mode (SM), Multi Mode (MM), Polarization Maintaining (PM), Plastic, PCF, Chalcogenide, Sapphire, Specialty Fibers Fiber Diameter: 80 µm to >3 mm Fiber Angle Range: 0° (Flat) to 50° Fiber Angle Repeatability: ±0.5° Typical Equipment Footprint & Weight: 305 x 305 mm, 11.3 kg Applications: Automated Optical Polishing of Connectors, Waveguides, Bare Fibers and More; Research and Development Projects; High-volume Production; Harsh Environments and Field Installation