TEG B25-12 (М) Thermoeletric Power Generators

Peltier Cooling Assembly Kit; Cooling Capacity 130 W @+25°C; with Detachable Carrier Plate; Power Supply 24 VDC Key Features: Ideal for Precise Cooling of Medical and Industrial Lasers Efficient Peltier System, no Liquids, no Moving Parts (Except Fans) Allows for Excellent Temperature Stability Low Vibration, Low Noise Lightweight, Very Compact Easy to Integrate The compact mDC-T-130-24-KIT thermoelectric plate-to-air cooling kit was developed for precise temperature control of laser diode modules and direct heat transfer to the ambient air. The highly efficient, solid state mini direct cooling system reaches a cooling capacity of 130 W for 24 VDC supply voltage and +25°C on laser mounting plate and +25 °C ambient temperature. The mDC-T-130-24-KIT Peltier cooling assembly kit comes with a 108 mm x 108 mm mounting plate that can be removed without the need to dismantle the Peltier assembly and can be worked on, i.e. individual mounting patterns can be drilled by the customer. The kit comes with graphite foil and screws pre-mounted. The Peltier modules can be configured for either 12 or 24 VDC. Depending on cooling requirements, the 60 x 60 mm fans' speed can be reduced for quiet operation. We also carry a large range of suitable temperature controllers that can be found here. If your application requires higher cooling capacities, take a look at our mRC-C-450-100/240 mini Recirculating Chiller and our liquid cooling solutions offerings – or browse our large portfolio of liquid to air temperature management assemblies. Your customized direct cooler: AMS Technologies’ thermal management specialists are happy to develop a direct cooling solution tailored to your needs – based on Peltier or compressor technology – and offer all services from development and proof-of concept to series production. Get in touch with us now to discuss your customized direct cooler.  Specifications: Nominal Cooling Capacity: 130 W (@+25°C Ambient, +25°C Mounting Plate (Bottom)) Power Consumption per Fan (Manufacturer’s Data): 6 W Max. Noise (Manufacturer’s Data): 49 dB(A) Coefficient of Performance (COP): 0.57  Applications: Direct Cooling and Precise Temperature Control of Laser Diode Modules With Power Dissipation of up to 130 W  

Cabinet Cooler; Compressor Based; 400 W @+26°C Cabinet, +35°C Ambient; 24 VDC; 13 A; Flush Mount; Temperature Stability ±0.05 K Key Features: Miniature Compressor-based Air Cooler for Cabinet Cooling Tasks up to 400 W Compact Dimensions and Low Weight Compared to Peltier-based & Other Compressor-based Coolers Easy to be Attached to Customer Cabinet IP65 Environmental Protection (Ambient Side) – For Operation in Harsh Environments 24 VDC Power Supply – Independent of Mains AC Voltage or Frequency Integrated Temperature Controller Speed-controlled Compressor – no Hysteresis, Stabilized Temperature to ±0.05 K PWM Speed-controlled Fan for Noise Reduction IoT Ready: Remote Operation, Monitoring and Service over Integrated Ethernet Interface AMS Technologies’ mAC-C-400-24 compact and rugged, compressor-based mini air cooler provides cabinet cooling capacities up to 400 W. In comparison to Peltier-based cabinet coolers, the highly efficient mAC-C-400-24 features significantly lower size and weight due to its miniature compressor and customized condenser/evaporator. A powerful fan moves the cabinet internal air at 130 m³/h. The internal air's temperature is maintained at the set value within ±0.05 K by an integrated circuit controlling the rotary compressor’s speed. The external fan is PWM speed controlled for noise reduction. Global Use: Its 24 VDC supply voltage allows the mAC-C-400-24 to operate from the cabinet’s 24 VDC voltage rail, with no need to care for the local mains voltage or frequency. IoT Ready: Access the mini air cooler’s system parameters from any location via the integrated Ethernet interface, also allowing remote control, service and even firmware update. Your customized air cooler: The mAC-C-400-24 cannot cover your requirements? AMS Technologies’ thermal management specialists are happy to develop a solution tailored to your needs – based on compressor or Peltier technology – and offer all services from development and proof-of concept to series production. Get in touch with us now to discuss your customized air cooler. Specifications: Cooling Capacity: 400 W @+26°C Tchilled cabinet air +35°C Tambient Temperature Stability: ±0.05 K External Working Temperature Range: +10°C to +50°C Internal Working Temperature Range: +15°C to +35°C Operating Voltage: 24 VDC Max. Operating Current: 13 A Max. Power Consumption: 310 W Refrigerant: R134a, 130 g (0.19 tequCO2) Dimensions: 310 x 157 x 475 mm Weight: 15 kg Orientation: Flush Mount, Side Wall or Door Environmental Protection Level, Enclosure Side: IP2X Environmental Protection Level, Ambient Side: IP65 Approvals: CE Applications: Cabinet Cooling; Cooling of Air inside Cabinets for Applications With up to 400 W Power Dissipation; Harsh Environments