KI 2600XL & KI 9600XL Series Large Area Detector Power Meters / Radiometers

Dynamic Range 1-1000 nW; 780-1650 nm; Integration Time 1 ms-1 min; USB Interface; Internal Light Source 1.55 µm Fibotec Fiberoptics’ dBM-00-C3rd-FCP dB-Meter measures power stability and power changes across a wide dynamic range with high accuracy and high speed. A stabilized 1550 nm light source is built in for quick and easy testing of passive components or local fiber loops. Alternatively light of external sources within a wavelength range of 780 nm to 1650 nm can be used. The power signal is provided both through an analog interface (0 V –3 V) and serial (USB) interface in a digital way. The measurement value is provided on command (“pull”), in fixed time intervals (“push”) or self-triggered on a pre-defined level. No extra power supply is needed when connecting the USB interface. Key Features: Operation With Internal Stabilized Light Source or External Light Source Flexible Operation, 3 Readout Options USB Powered High Dynamic Range: 1 nW to 1 mW Source Wavelength: 1.55 µm (Typical, Special Wavelengths on Demand) Receiver Wavelength Range: 780 nm to 1650 nm (InGaAs Detector) Integration Time: 1 ms to 1 min Max. Fiber Core Diameter (FC/PC): 62.5 µm Power: USB Powered Dimensions: 145 x 100 x 17 mm Operating Temperature: +5°C to +35°C (Non-condensing) Applications: Monitoring of Processes Causing Fast Optical Power Changes; 24/7 Power Monitoring; Testing of Components

Optical Power -70-+33 dBm; 600-1700 nm; Accuracy 1%; Display mW, μW, nW, dB, dBm; Detector InGaAs, Ge; Resolution 0.01 dB Kingfisher’s KI 2600 Series handheld fiber meters measure absolute or relative light levels and test tones and are used by professional installers and contractors to test power, loss, continuity and faults on all types of fiber optic systems. Superior measurement confidence is achieved through a combination of excellent basic accuracy, intuitive use and rugged reliability. KI 2600 Series power meters have comprehensive report generation capabilities and a variety of useful features for productivity. Various detector options cover power levels from +33 to -70 dBm, all useful wavelengths, many connector styles including duplex / ribbon, and large core POF fiber. The meter displays mW, μW, nW, dB, dBm to 0.01 dB resolution, with no range-changing delays. A separate reference for each wavelength is stored and displayed. Superior high-power performance is achieved. Autotest provides fast, easy and automatic multi λ (wavelength) loss testing up to 6 wavelengths, with up to 3 wavelengths displayed simultaneously, along with the respective source nominal power levels. Any Kingfisher Autotest light source/LTS with matching wavelength can be used. Unique in the industry, the tight total uncertainty specification covers all power levels, temperatures, connectors and fibers, without warm-up or user dark current offset. Calibration is ISO 17025 traceable. Interchangeable connectors are dust and drop protected. SC adaptors are supplied, with others available including small form factor LC styles. Metal-free adaptors avoid contamination of connectors in high-power systems. Loss test results can be stored in the large memory, along with a user-input cable name and time stamp. Results can be copied onto a USB memory key with one button push. Alternatively, live readings can be put directly onto a customer report computer using KITS™ customizable Excel-based reporting software. Reports can be easily customized for any terminology, language or format. KITS™ also provides a one-button file dump to a PC with Windows OS. When used with Multi-fiber ID sources, the Multi-fiber ID tone feature uniquely identifies up to 12 fibers, in addition to common test tones. The VFL (Visible Fault Locator) option offers simple fault finding and continuity testing. Flexible power options include a choice of batteries, with a jumper selectable battery charger. External power is provided via USB. For optical power meters with large area optical detectors up to +33 dBm for testing e.g. ribbon fiber, MPO/MT/MTP and MTRJ, large core fiber such as POF, fiber bundles, high power pump lasers, other general optical applications etc., please refer to Kingfisher’s KI 2600XL Series. Key Features: Easy to Use, Rugged & Versatile Optical Power Range: -70 to +33 dBm Wavelength Range: 600 to 1700 nm Detectors: InGaAs, H5 (InGaAs), Ge 28 Genuine 1% Traceable Calibration Wavelengths 1% Accuracy ISO 17025 Traceable Calibration Certificate Improved High Power Accuracy Autotest With up to 3 Wavelengths Displayed Minimum Tone & Autotest Sensitivity: -35 to -50 dBm Typical Wavelength Sensitivity (±30 nm): 0.03 dB Typical Midrange Linearity: 0.04, 0.06 dB Typical Polarization Sensitivity: <0.05 dB Maximum Total Uncertainty: 0.3 to 0.5 dB Power Averaging Mode for Modulated Signal Max/Min Recording Very Long Battery Life, External Micro USB Power Large Back-lit LCD, Sunlight-readable Interchangeable Connectors With Dust Cap/Tilt Bail Large Memory With Text, Time Stamp and USB Dump KITS™ Flexible Real-time PC Reporting Software With Data Security One-Button Memory Dump to USB Key Multi-fiber ID Tone Detection for Fiber Identification VFL Visual Fault Finder Laser Option Size & Weight: 190 x 105 x 35 mm, 420 g Full QA & Linearity Test Report 3 to 7 Years Warranty 3 Years Recommended Calibration Cycle Applications: System Power Testing; Attenuation Testing, Fiber Identification; Fault Finding & Continuity Testing

Optical Power -60-+24 dBm; 635-1625 nm; Accuracy 2%; Display mW, μW, nW, dB, dBm; Detector InGaAs, Ge; Resolution 0.01 dB Kingfisher’s inexpensive KI 9600A Series are simple and reliable shirt-pocket optical power meters for testing power and loss on all types of fiber optic systems. The KI 9600A Series’ 2% traceable calibration accuracy, ease of use and high availability combine to achieve superior measurement confidence. Detector & calibration options cover a wide range of connector types, fiber types, common wavelengths and power levels from +24 to -60 dBm. The small KI 9600A Series pocket fiber power meters are ideal for measuring absolute / relative light levels or test tones on single mode (SM), multi mode (MM) or plastic optical fiber (POF) systems. High traceable accuracy and ease of use make it perfect for field or laboratory. The series’ tough construction includes moisture resistance, rubber corners, a captive connector dust cap and it can be dropped over 2 meters onto a hard surface. These instruments meet MIL PRF 28800F Class 2. When used with multiple KI 9800A Series light sources, the multi-fiber ID feature uniquely identifies up to 12 fibers. The tight total uncertainty specification covers the entire range of measurement, temperature, connectors and fiber types, without warm up or dark current offset. Calibration is ISO 17025 traceable. Operational savings come from a 3-year warranty, 300 hours of battery life and fast operation. The meter displays mW, μW, nW, dB, dBm to 0.01 dB resolution. A separate reference for each wavelength can be stored. A power averaging mode measures the average power of modulated signals. The tamper-lock mode enables a site manager to lock and track instrument settings to reduce measurement skill and improve both test confidence and traceability. Interchangeable optical connectors are dust and drop protected. Other styles include the popular LC. The InGaAs meter is the preferred solution for single mode testing from 900 to 1650 nm. Ge meters offer modest accuracy from 660 to 1550 nm. H series InGaAs meters are available for high-power testing. They offer good immunity to wavelength and reflection effects. For testing 1 mm POF, ribbon fiber, MT-RJ, expanded beam connectors etc., refer to the KI 9600-XL series for instruments with large-area detectors. Key Features: Shirt Pocket Size With Spring Clip: 124 x 81 x 25 mm Low Weight: 0.15 kg Detector: InGaAs, H3B (InGaAs), H5 (InGaAs), Ge Up to 12 Calibrated Wavelengths: 635 to 1625 nm Calibration Accuracy: ±2% ISO 17025 Traceable Easy to Use, Rugged & Reliable 2 x AA Batteries, 300 h Life Large Sunlight-readable Display Displays dBm, dB, linear, Tone Hz Optical Power Level: -60 to +24 dBm Resolution: 0.01 dB Typical Wavelength Sensitivity (±30 nm): 0.03, 0.04 dB Typical Midrange Linearity: 0.04, 0.06 dB Typical Polarization Sensitivity: <0.05 dB Maximum Total Uncertainty: 0.3, 0.5 dB Power Averaging Mode for Modulated Signal Max/Min Recording & Display Hold Tone Detector With Multi-fiber ID for Fiber Identification: -20 to -50 dBm Sensitivity Easy to use Tamper-lock Mode for Low-skill Measurement Patented Low-cost Interchangeable Connectors Full QA Reports ISO 17025 Traceable Calibration Certificate 3 Year Warranty & Calibration Applications: System Power Testing; Attenuation Testing; Fiber Identification; Wavelength Selective Option for PON

The NEW Kingfisher Handheld Fiber Meter is a premium power meter used to test power, loss, continuity and faults on fiber optic systems, The InGaAs detector is recommended for testing singlemode fiber from 1000 - 1650 nm at up to +10 dBm and 200u core diameter,

The small KI 9600A-XL Shirt-Pocket Fiber Meter is a simple and reliable power meter recommended for testing fiber optic systems where a large area detector is required, Two types of 5 mm detector are offered: Si and Germanium, These meters are commonly used for measuring up to 3 mm core diameter POF / PCS / HCS fiber, MTRJ connectors, and MPO / MP / MTP ribbon fiber connectors up to 72 fibers, Typical application areas include Audio, Profibus, industrial, LAN and Telecom, Industry standard screw-on adaptors are available for a wide variety of optical connectors, Our Applications Engineers would be glad to assist with your special needs,

Kingfisher’s KITS™ software is a flexible, powerful and secure cable software solution for real-time data acquisition, labeling, analysis and reporting of fiber optic attenuation, power and optical return loss (ORL). This software can be used with Kingfisher power meters, ORL and loss testers and it easily integrates with cable & rack label printers. KITS™ dramatically improves testing productivity, lowers skill level, minimises errors and enhances report customizing capability. KITS™ can be used across any size of organisation as a true enterprise level solution for performing measurement, reporting and database entry. It quickly produces professional cable pass/fail reports suited to outside plant and LAN / data center requirements. KITS™ is built into Excel. It is a convenient out-of-the-box solution for most users and can be easily customised in many ways. Key Features: Real-time Acquisition, Display, Data Transfer, Report Building and Pass/Fail Using KI 2xxx & 7xxx Series Instruments Integration With Kingfisher Autotest Instruments Easy to Use, Productive & Flexible Pass/Fail Bi-directional Loss & ORL in 5 s, With a KI734x Two-Way Tester Pass/Fail Reporting to TIA 568, IEC 14763, Other & Custom Standards Easily Customize Multiple Customer Reports Print Labels via Cable & Rack Labeling Wizard With Brother P-Touch Editor Software Works on Windows, With Familiar Excel™ User Interface Built-in Demo Instrument Emulation for Easy Trial Flexibility to Accommodate Many Work Practices Data Security With Secure Data Mode and Secure Data Import/Export Formats Use On- or Off-site: Either Work Live or Download Results From Instrument Memory Data Logging Mode for Monitoring & Intermittent Fault Finding Australian LAN, Telstra & NBN Reporting Solutions Compatible Power Meters or Loss Test Sets / Two-Way Testers Easy Data Integration With Corporate Asset Database Demo Mode for Easy Trial Evaluation Free Software & Updates Computer Requirements: Windows 32 or 64 Bit 10/8.x/7/Vista/XP, Apple OSX (Mavericks) using Parallels 9, for Full Functionality: 32 Bit MS Office 2016/2013/2010/2007 Applications: Data Acquisition, Reporting and Data Integration for Fiber Optic Loss, Power & ORL

OEM Type Optical Power Meters, No Display; 450 to 1650 nm; Power Measurement -65 to +10 dBm; Accuracy ±5%; Resolution 0.01 dB; FC, SC, ST, LC Receptacles OZ Optics’ LSDH/POM-600 series of smart detector heads/optical power monitors offers OEM modules (with no built-in display) that can be embedded in systems for remote power monitoring or for long term power logging for burn-in test stations. These OEM versions come with a USB interface in the LSDH (round base) and with RS232 in the POM-600 (rectangular base). SPI or I2C remote interfaces can be provided on demand for volume OEM orders. Customers can install OZ Optics’ provided user graphical interface on a host PC to display the measured optical power. Or customers can use the device commands to develop their own user graphical interface. The LSDH/POM-600 series of smart detector heads/optical power monitors offers a high, greater than 60 dB linear dynamic range and can be easily embedded in long-term power monitoring stations like environmental optical test systems or long term burn-in stations. The device can be offered with calibration at discrete wavelengths or with no wavelength calibration for relative power measurements. Customers may also perform their own calibration. OZ Optics also offers equivalent pocket size units with built-in displays. For further information please refer to the POM-500 series of pocket fiber power meters and the POM-400 series of miniature fiber power meters. For handheld units with built-in displays and a choice of additional receptacles, please refer to OZ Optics’ POM-300 series of handheld fiber power meters. Key Features: Slim and Compact Built-in InGaAs Detector for IR Range or Si Detector for Visible Interchangeable Optical Connectors Available Calibrated and Uncalibrated Versions Available Customers May Perform Their Own Calibration USB and RS232 Interfaces Applications: Long-term Remote Power Monitoring; Fiber Optic Assembling and Testing; Optical Test Systems; Passive Optical Components Burn-in Stations; General Optical Power Measurements; Embedded Systems