KI2600-InGaAs Optical Power Meter

Single-scan, All-parameter Measurement; 1270-1610 nm; Wavelength Resolution 1.6 pm; Loss Measurement Dynamic Range 60, 80 dB; Loss Measurement Resolution ±0.002, ±0.05 dB Luna’s OVA 5000 Optical Vector Analyzer™ is the fastest, most accurate and economical tool for loss, dispersion and polarization measurements of modern optical networking equipment – and the only instrument on the market that is capable of full and complete all-parameter linear characterization of single-mode optical components in a single scan. The OVA 5000 provides comprehensive component characterization of dispersion compensation modules, AWGs, Fiber Bragg Gratings and many other optical devices. The OVA 5000 uses an interferometric method to directly measure the linear transfer function (Jones Matrix) and simultaneously measure its four complex elements at every wavelength. From this data, all standard linear parameter measurements can be extracted with the highest dynamic range and accuracy available. The result is an extremely fast, high-resolution and accurate device characterization that is ideal for silicon photonics and other integrated photonics devices. The OVA 5000 simultaneously performs these optical component characterizations every 3 seconds: Insertion Loss (IL) Return Loss (RL) Dependent Loss (PDL) Phase Response Group Delay (GD) Chromatic Dispersion (CD) Polarization Mode Dispersion (PMD) / Second Order PMD Min/Max Loss Due to Polarization Impulse Response Jones Matrix Elements Phase Ripple – Linear and Quadratic With the optical frequency domain reflectometer (OFDR) option, the OVA 5000 optical vector analyzer can also operate as a high-resolution reflectometer , delivering reflectometer measurements with 20 μm sampling resolution, “zero dead zone” and high sensitivity (>95 dB). An optional polarization analysis software add-on allows the OVA 5000 to measure, calculate and display the response of an optical component to simulated input polarization states, eliminating the tedious and difficult task of polarization alignment. Key Features: Single Measurement, All-parameter Analysis of Devices up to 150 m in Length Full Characterization of Passive Devices in Under 3 s Complete Polarization Response Simultaneously Measure Complete Range of Parameters in One Single Scan: IL, RL, PDL, PMD, Second Order PMD, CD, GD, OTD Response, Jones Matrix Elements, Optical Phase Response High-Resolution C and L Band (OVA 5000) or O Band (OVA 5013) Capability Fast and Averaging Modes Real-time Measurements User-friendly Interface Wavelength Range: 1270 to 1610 nm Wavelength Resolution: 1.6 pm Loss Measurement Dynamic Range: 60, 80 dB Loss Measurement Resolution: ±0.002, ±0.05 dB Applications: Analyze Planar Light Circuits and Silicon Photonic Devices; Characterize Optical Fiber Components; Measure Both Spectral Response and Time Delay Response; Improve Device Simulations and Models With Complete Transfer Function

Handheld Optical Power Meters; 440 to 1650 nm; Power Measurement -75 to +10 dBm; Accuracy ±5%; Resolution 0.01 dB; FC/PC, ST, SC, LC, MU, Universal 1.25/2.5 mm Receptacles OZ Optics’ POM-300 series of handheld fiber power meters offers high resolution with a wide dynamic range covering a broad spectrum of wavelengths. A user-friendly keypad and easy-to-read back-lit display makes it well suited to most user applications. Extremely low power consumption allows extended operation in the field. Alternatively, the AC adapter may be used, either directly or to recharge the internal battery. The POM-300 series of optical power meters can accommodate a variety of standard, interchangeable screw-in receptacles. Power levels as high as +10 dBm or as low as -75 dBm can be easily measured, with the values displayed in W or dBm. Relative measurements can be displayed in dB. The wavelength can be selected in increments of 10 nm or set to a specific value within 1 nm. Through the keypad and liquid crystal display, the user can configure various modes of operation and format the displayed measurements. Alternatively, using the USB interface, the POM-300 series can be controlled by a host PC using a series of simple commands. Key Features: Wide Dynamic Range Wide Wavelength Range Interchangeable Optical Connectors Available Long Battery Lifetime: Up to 300 h Powered by Rechargeable Battery or AC Adapter USB Interface for Computer Control Protective Rubber Boot Built-in Backlight Applications: Fiber Optic Assembling and Testing; Quality Control and Measurement; Network Installation; Component and System Troubleshooting; Education; General Optical Power Measurement