Skip to main content

Beam Analyzers

Product information "Beam Analyzers"

Detector Type Si, IR-Enhanced Si, InGaAs, UV-Enhanced InGaAs, CMOS; 190-2700 nm; Beam Size 0.5-45,000 µm; Power Range 100 µW - 8 kW; Interface USB, USB 2.0, Other Duma Optronics offers a comprehensive series of beam analyzers based on technologies such as scanning knife-edge with tomographic beam reconstruction. The series’ wide spectral range is unprecedented for a single detector, ranging from 200 to 1600 nm and even further on to 2700 nm.

High-power beam analyzers are available for testing high-power laser beams used for material processing. These HP models allow online measuring of beam profile and absolute power, measurement of M² and accurate location of beam waist for laser printing technology.

Duma Optronics’ series of beam analyzers is capable of analyzing beam sizes from under 0.5 µm up to 45 mm and feature a full set of attachments for M² measurement and other sophisticated applications.

BeamOn 2 MP: Best cost-effective system for high-resolution laser beam measurement, especially for focused beams. Key Features are 2 Megapixel resolution, 3 µm per pixel and down to 60 µm beam size. Download datasheet

BeamOn WSR: This beam analyzer is based on a proprietary technology measuring from UV to 1550 nm with camera technology. For BeamOn WSR, a complete set of accessories is available, including a built-in motorized filter wheel. Download datasheet

BeamOn LA: A beam diagnostics measurement system for real-time measurement of continuous or pulsed large laser beams (up to 45 mm). Download datasheet

µBeam: The analyzer for microscopic beams: A beam diagnostics measurement system for real-time measurement and display of small CW or pulsed lasers in the sub-micron range, fiber optic and laser diode beam profiles. Download datasheet

BeamOn U3-E: This 2.35 Megapixel wide spectral range detector is capable of measuring beams up to 1350 nm with a full setup of accessories for various applications. A version for ultraviolet (UV) wavelengths is available on request. Download datasheet

LAM Beam Analyzer: New instrument especially designed for LAM (Laser Additive Manufacturing). Measuring critical parameters such as beam size, accurate beam position and power. Download datasheet

Beam Analyzer HP: High-power measurements up to 5 kW based on beam sampler technology combined with pressurized air cooling will measure beam profile in real time and relative power fluctuation. Download datasheet

BeamOn U3 HP: A full-power measurement system based on a high-resolution camera combined with Duma Optronics’ our patented technology of sampling and cooling will measure up to IR wavelengths of 1.6 microns. Download datasheet

BeamOn HP: Simplified version of beam analysis when compared to BeamOn U3, offering an excellent price-performance ratio. Download datasheet

Microbeam HP: A unique microbeam analyzer for relatively small focused beams down to less than 5 µm with power levels exceeding 100 W. Download datasheet

Key Features:

  • Complete Line of Laser Beam Analyzing
  • Suitable for CW and/or Pulsed Lasers
  • Two Technologies: Tomographic Knife-edge and CCD/CMOS Imaging Systems
  • Wide Range of Beam Sizes: 0.5 to 45,000 µm
  • Broad Wavelength Ranges From UV to 2700 nm
  • High-power (HP) Models Available
  • Full Set of Attachments for M² Measurement and Other Sophisticated Applications

Applications: Analyzing CW and Pulsed Laser Beams, Providing Profiles, Beam Size, Beam Position and Real-time Power Measurements. Analyzing Beams With Sizes Ranging From Less Than 0.5 µm up to 45 mm; Analyzing Laser Beams With Power Levels From pW up to Several W, High Power Versions up to 8 kW; Special Versions for Solar Energy

Manufacturer "Duma Optronics"
Related links of the manufacturer

Similar products

Alignment Solutions
Detector Type Proprietary CMOS; 350-1550 nm; Pixel Size 5.3 x 5.3, 5.86 x 5.86 µm; Position Resolution 1.5-2.5 µrad; Interface USB 3.0; Clear Aperture 36-100 mmDuma Optronics provides a complete series of optical and mechanical alignment solutions, including systems based on autocollimation and laser alignment. Alignment sensing provides simultaneous position and angle measurements for various applications. By combining autocollimation principles with laser alignment, this series of alignment solutions yields extreme accuracies in angular measurement and offers capabilities of inter-alignment between several lines of sight with resolutions in the microradian range. Laser Analyzing Electronic Autocollimator: A combination of electronic autocollimator, measuring minute optical reflections in the visible and NIR, with laser beam analysis providing beam direction and divergence as well. A proprietary version measures and compares reflections to angular directions of incoming beams. The laser analyzing electronic autocollimator is also available with an autofocus feature. Download datasheetAutocollimator HR: Extremely accurate large aperture autocollimator with a high resolution down to 0.01 sec. Download datasheetAlignMeter: A unique instrument for simultaneous measurements of attitude and position of incoming laser. AlignMeter allows simultaneous beam measurement of position (in µm) and angle (in µRad), where AngleMeter measures only incoming angles. Download datasheetLaser Analyzing Telescope: Beam characterization telescope for attitude measurements as well as degree of collimation, resolution down to 1 µrad. Download datasheetAngleMeter LA: Attitude measurements of incoming laser over extremely large angles. With its wide aperture, the AngleMeter LA measures angular laser deviations (in µRad) by monitoring the beam angle in two orthogonal directions, while Laser Analyzing Telescope will display beam divergence as well. Download datasheetKey Features: Complete Line of Laser Beam Alignment Solutions Combining Autocollimation Principles With Laser Alignment Extreme Accuracies in Angular Measurement Capabilities of Inter-alignment Between Several Lines of Sight Resolutions in the Microradian Range Full Beam Divergence and Attitude Characterization Available Unique Infrared IR Autocollimator up to 1550 nm Laser Analyzing Telescope Applications: Alignment of Laser Cavities; Straightness Measurement; Machine Alignment; Wide-bed Printers Alignment; Others
Product number: SW11077
Manufacturer:

Beam Positioners
Sensor Size 4 x 4 - 100 x 80 mm; 350-1100 nm; Power Range 1-2,500 µW; Position Resolution 0.1-100 µm; Position Accuracy 25-1,000 µm; Interface Analog, USB 2.0, MobileLasers propagating through space have a perfect line trajectory. Using this quality, combined with a position sensor capable of measuring perpendicularly to the propagation direction, Duma Optronics’ comprehensive series of beam positioners yields a perfect system for straightness and alignment. Many applications such as machine straightness measurement, alignment of optical systems, vibration and quality control are enabled by combining the system with the powerful computing capability of today. Optical beam position measurements can be done by a variety of sensor heads, including CCD or miniature and large-area PSD. Duma Optronics offers a variety of sensor head sizes to accommodate numerous application needs. Position sensing provides measurements of optical beam location on a detector surface, and also provides absolute power measurements. Duma Optronics’ series of laser beam positioners are measuring accurately down to fractions of a micron, wherein lower resolution allows measurements over wide areas up to 100 mm. This series includes various detector types such as lateral effect, centrally perforated four-quadrant in 4 x 4 mm up to 100 mm size, and CCD. SpotOn Analog: A complete solution for fast and extremely accurate beam positioning. The system measures both optical beam position and power. Download datasheetSpotOn Mobile: High-accuracy compact beam positioning system with Nexus7 PC tablet included. Download datasheetLaserOn: Compact visible laser diode (635 nm) with built-in screws for fine beam direction adjustment. Completing usage for positioning. Download datasheetSpotOn LA: Large aperture beam positioning system for applications exceeding 100 mm of beam positioning area. Download datasheetSpotOn USB 2.0: A portable, fast and accurate optical beam positioning system (down to 0.1 µm) featuring a USB 2.0 interface. Download datasheetKey Features: Complete Line of Laser Beam Positioning Various Detector Types: Lateral Effect, Centrally Perforated Four-quadrant, CCD Simultaneous Operation of Several Detectors Fast Acquisition up to 60 kHz Calibrated Lasers for Alignment Reference Applications: Machine Straightness Measurement; Alignment of Optical Systems; Vibration Measurement; Quality Control
Product number: SW11076
Manufacturer:

Customers also viewed

End Capped High Power Assemblies
Fiber Type Step Index MM, Other; Wavelength 190 to 2400 nm; Sheathing Stainless Steel Monocoil (Bare or PVC Coated); Termination High Power SMA, High Power FD-80Fiberguide’s end capped high power fiber optic assemblies allow the user to achieve higher coupled power into a fiber core by reducing the power density at the air/ silica interface, commonly the point of laser damage. End cap diameters and lengths are offered for select numerical apertures and fiber core sizes but can be easily customized for a variety of fiber types and specialized applications. End capped high power assemblies allow for much higher transmitted powers by reducing the power density to a level below the damage threshold. Their shaped endcap tips can be tailored to specific laser launch conditions and applications. Fiberguide’s proprietary laser polishing process minimizes surface imperfections and maximizes power handling. High Power SMA and D-80 compatible connector options offer superior thermal management while minimizing connector stress for NA conservation. With their epoxy-free cantilevered nose design (available in select versions), Fiberguide’s end capped high power assemblies allow thermal energy to safely dissipate and thus minimize laser and heat damage to surrounding materials Fiberguide offers end capped high power assemblies for a broad range of step index multi mode fibers, including AFS/AFM/AFH/SFS/SFM/SFH all silica optical fiber, AFSH/SFSH hard polymer coat fiber, APC/SPC polymer clad fiber, APCH/SPCH hard clad fiber, AFR/SFR Uniclad™ high power fiber or Solarguide™ solarization resistant fiber. For end capping other fiber types like AGI/ASI anhydrous graded index multi mode fiber or single mode fiber, please get in touch with AMS Technologies’ fiber optic team and discuss the requirements of your solution! For high temperature applications, some fiber types can be aluminium or gold coated on request. Additionally, all fiber types can be equipped on demand with Fiberguide’s patented RARe Motheye anti-reflective technology that enhances fiber transmission performance and significantly increases the damage threshold for your application over a large wavelength range. Key Features: Standard Fiber Type: Step Index Multimode, Other Fiber Types (SM, Graded Index, …) Available Upon Request Core Sizes: 50 to 400 μm Wavelengths: 190 to 1250 (High OH), 300 to 2400 nm (Low OH ) Standard Numerical Aperture: 0.20, 0.22 Connector Options: High Power SMA, High Power FD-80 Sheathing Options: Stainless Steel Monocoil (Bare or PVC Coated) Power Handling Capacity: Up to 3 kW Standard Temperature Range: -40 to +100 °C
Product number: SW10695
Manufacturer:

LOR-220 OTDRs
520-1650 nm; Pulse Width 1 ns; Measurement Range 1.25-160 km; Fiber Type SM, MM, POF; Connector Type FC, SC, ST – APC or PC The LOR-220 series of fully portable stand-alone OTDRs is integrated in a Windows-based PC-platform with touchscreen interface. With the optical pulse width of only 1 ns, the LOR-220 series are the first truly portable high-resolution OTDRs specially designed for short-range multi mode (MM) or single mode (SM) fiber assemblies, found for example in airplanes, ships, automotive, defense, and similar applications. The LOR-220 is based on Luciol’s novel patented scanning photon-counting technology. It is the highest-resolution instrument of this family and has industry-leading resolution and dead-zones (10 cm event dead-zone, 40 cm attenuation dead-zone). A large variety of wavelength options (520 to 1650 nm) as well as single- and dual-output versions are available, up to four different emitters can be integrated in a single module. The OTDR model LOR-220 POF is specially designed for testing large-core optical fibers such as 1 mm PMMA (POF) or others, providing a universal tool to characterize insertion losses and fiber attenuation. The LOR-220 POF is available on a custom basis for most large-core optical fibers and it has several wavelengths options. With the models LOR-220-U (single port) and LOR-220-UD (dual detector, dual port), Luciol Instruments offers a table-top packaging option that requires an external PC for control and operation. The LOR-220-UD OTDR can combine up to four wavelengths in the range of 500 to 1650 nm in one instrument. Both models are equipped with a standard USB port for convenient and easy connection to most Windows based PC and are ideal for test bench integration, laboratory environment OTDR testing and many more applications. Luciol has added several options to the LOR-220 series of high-resolution OTDRs: The Visual Fault Locator (VFL) option enables a blinking red laser, which is connected to the same connector as the OTDR itself. The user can switch from VFL to OTDR measurement directly in the software, without removing the connecting fiber. With access to the end of the fiber under test, the VFL can be used as a fiber identifier, to verify that the correct assembly is tested. This feature is especially useful for customers testing assemblies with multiple-fiber connectors with a probe. Please note that this VFL option is available only for the LOR-220 with 670 nm OTDR wavelength, the LOR-220 POF and the LOR-220-U/UD models. The Optical Power Meter (OPM) option is calibrated at 850, 1310, 1550 and 1610 nm. It covers power ranges of -50 to +8 dBm at 850 nm and -55 to +3 dBm at 1310 to 1610 nm. Please note that the OPM option is not available for the LOR-220-U/UD models. With the Fiber Microscope (FM, FSL) option, the user can verify the surface quality and cleanliness of all optical connectors before use. The surface is shown onto the LOR screen. It can be saved and printed for reference or reporting. Advanced software application is also available. Please note that the FM/FSL option is not available for the LOR-220 POF and LOR-220-U/UD models. Models designed for aviation applications are available. Benefit from the LOR-220’s high resolution for troubleshooting, fiber monitoring and precise fault location. If the standard models should not meet your needs, contact AMS Technologies with your requirements and together let us find the customized solution to your fiber optic measurement challenge. Key Features: Low Optical Pulse Width for Shorter Dead-zones: 1 ns Event Dead-zone: 10 cm Typical Attenuation Dead-zone (for ORL = 45 dB): 40 cm Typical Wide Range of Wavelength Options: 520 to 1650 nm Up to 4 Wavelengths High Dynamic Range for Loss and Reflectance Measurements: Rayleigh Backscattering >12, >20 dB (S/N = 1) Version Optimized for Avionics Applications Available Single Mode (SM), Multi Mode (MM) and Dual SM/MM Versions Available Version for Plastic Optical Fiber (POF) Available Standard Fiber Types: Single Mode (SM, 9/125 µm), Multi Mode (MM, 50/125 or 62.5/125 µm), PMMA 1mm Connector Type: Universal, APC or PC Type, With FC, SC or ST Adapter Distance Measurement Range: 1.25 to 160 km Distance Accuracy: ± (10 mm + 5 x 10-5 x Fiber Length) Reflectance Accuracy: ±1.5 dB Loss Accuracy: ±0.1dB ± 0.02 dB/dB Sampling Resolution: Any Multiple of 2.5 cm (250 ps) Options: Visual Fault Locator (VFL), Optical Power Meter (OPM), Fiber Microscope (FM, FSL), Table-top Format (LOR-220-U/UD) Remotely Controllable Through Ethernet Connection Operating Temperature: 0 to +40 °C Weight: 3.1 kg (Stand-alone Portable), 1.9 kg (Table-top) Dimensions: 320 x 240 x 90 mm (Stand-alone Portable), 310 x 225 x 60 mm (Table-top) Applications: Avionics; Aerospace; Defense; Automotive; Optical Components; Fiber Assemblies; IL/ORL Testing; Fiber Manufacturing, Other
Product number: SW11473
Manufacturer: