Skip to main content

mAC-C-400-24 mini Air Cooler Cabinet Cooler

Product information "mAC-C-400-24 mini Air Cooler Cabinet Cooler"

Cabinet Cooler; Compressor Based; 400 W @+26°C Cabinet, +35°C Ambient; 24 VDC; 13 A; Flush Mount; Temperature Stability ±0.05 K

Key Features:

  • Miniature Compressor-based Air Cooler for Cabinet Cooling Tasks up to 400 W
  • Compact Dimensions and Low Weight Compared to Peltier-based & Other Compressor-based Coolers
  • Easy to be Attached to Customer Cabinet
  • IP65 Environmental Protection (Ambient Side) – For Operation in Harsh Environments
  • 24 VDC Power Supply – Independent of Mains AC Voltage or Frequency
  • Integrated Temperature Controller
  • Speed-controlled Compressor – no Hysteresis, Stabilized Temperature to ±0.05 K
  • PWM Speed-controlled Fan for Noise Reduction
  • IoT Ready: Remote Operation, Monitoring and Service over Integrated Ethernet Interface

AMS Technologies’ mAC-C-400-24 compact and rugged, compressor-based mini air cooler provides cabinet cooling capacities up to 400 W. In comparison to Peltier-based cabinet coolers, the highly efficient mAC-C-400-24 features significantly lower size and weight due to its miniature compressor and customized condenser/evaporator.

A powerful fan moves the cabinet internal air at 130 m³/h. The internal air's temperature is maintained at the set value within ±0.05 K by an integrated circuit controlling the rotary compressor’s speed. The external fan is PWM speed controlled for noise reduction. Global Use: Its 24 VDC supply voltage allows the mAC-C-400-24 to operate from the cabinet’s 24 VDC voltage rail, with no need to care for the local mains voltage or frequency. IoT Ready: Access the mini air cooler’s system parameters from any location via the integrated Ethernet interface, also allowing remote control, service and even firmware update.

Your customized air cooler: The mAC-C-400-24 cannot cover your requirements? AMS Technologies’ thermal management specialists are happy to develop a solution tailored to your needs – based on compressor or Peltier technology – and offer all services from development and proof-of concept to series production. Get in touch with us now to discuss your customized air cooler.

Specifications:

  • Cooling Capacity: 400 W @+26°C Tchilled cabinet air +35°C Tambient
  • Temperature Stability: ±0.05 K
  • External Working Temperature Range: +10°C to +50°C
  • Internal Working Temperature Range: +15°C to +35°C
  • Operating Voltage: 24 VDC
  • Max. Operating Current: 13 A
  • Max. Power Consumption: 310 W
  • Refrigerant: R134a, 130 g (0.19 tequCO2)
  • Dimensions: 310 x 157 x 475 mm
  • Weight: 15 kg
  • Orientation: Flush Mount, Side Wall or Door
  • Environmental Protection Level, Enclosure Side: IP2X
  • Environmental Protection Level, Ambient Side: IP65
  • Approvals: CE

Applications: Cabinet Cooling; Cooling of Air inside Cabinets for Applications With up to 400 W Power Dissipation; Harsh Environments

Manufacturer "AMS Technologies"
Related links of the manufacturer

Similar products

Only 1 available
380-24-AA TEC based Cabinet Cooler 210W Cooling Capacity
Cabinet Cooler - 210W Cooling Capacity - TEC based – 380-24-AA
Product number: C008730-1
Manufacturer:

€682.00*
CC200-24 Cabinet Cooler - 16,5W Cooling Capacity - Heatpipe based
Cabinet Cooler - 16,5W Cooling Capacity - Heatpipe based – CC200-24
Product number: C019387-6
Manufacturer:

€1,271.70*
CC2000-24 Cabinet Cooler - 110,4W Cooling Capacity - Heatpipe based
Product number: C019380-6
Manufacturer:

€1,595.70*
CC2500F-24 Cabinet Cooler - 104W Cooling Capacity - Heatpipe based
Product number: C018977-6
Manufacturer:

€2,192.40*
CC254F-24 Cabinet Cooler - 16,5W Cooling Capacity - Heatpipe based
Product number: C018976-6
Manufacturer:

€1,406.70*
CC4000F-24 Cabinet Cooler - 200W Cooling Capacity - Heatpipe based
Product number: C019240-6
Manufacturer:

€3,651.75*
CC400F-24 Cabinet Cooler - 20,4W Cooling Capacity - Heatpipe based
Cabinet Cooler - 20,4W Cooling Capacity - Heatpipe based – CC400F-24
Product number: C008930-1
Manufacturer:

€1,042.00*

Customers also viewed

UM/LabM/UHSM/MicroM Selected Line Infrared Detection Modules
2-12 µm; Active Area 0.0025, 1 mm²; Responsivity ≥5.0x101-≥6.5x104 V/W; Detectivity ≥5.0×106-≥2.3×1010 cm·Hz1/2/W; Power Supply +5,+9 VDC Vigo System’s UM, LabM, UHSM and MicroM selected line series of infrared (IR) detection modules integrate the infrared photodetector with signal processing electronics, optics, heat dissipation systems and other components in a common package – resulting in very convenient and user‑friendly devices that can be easily used in a variety of MWIR/LWIR applications. This integration makes the detectors less vulnerable to over-bias, electrostatic discharge, electromagnetic interference (EMI) and other environmental exposures. Additional advantages of the integration are improved high-frequency (HF) performance, output signal standardization, miniaturization, and cost reduction. Vigo System’s selected product line guarantees a short order fulfillment date and an effective price. Vigo System offers detection modules with an infrared detector optimized for uncooled operation or for temperatures achievable with Peltier-coolers in the spectral range from 2 µm to 12 μm. IR radiation emitted by an object is concentrated on the active area of an IR detector, generating photoelectric signals which are sensed by the front-end electronics (FEE). The front-end electronics circuitry is typically used to: Provide optimum conditions for the operation of IR detectors (to achieve high sensitivity, fast response, and a wide dynamic range. This is typically achieved with optimized constant voltage bias and current mode of the photoelectric signal readout.) Protect detector elements against overbias Amplify the signal within the required frequency band. This could be done with a minimized contribution of the preamplifier noise to the resulting noise of the detection module. In addition to front-end electronics, detection modules may include additional electronic blocks for signal conditioning, such as gain blocks, filters, thermoelectric cooler controllers, analog-digital converters (ADC) and other components. Except for MicroM, these IR detection modules feature 3° wedged zinc selenide anti-reflection coated windows preventing unwanted interference effects. Vigo System’s UM series features universal „all-in-one” 3.0 µm to 6.7 μm and DC to 1 MHz (UM-I-6) as well as 2 µm to 12 μm and DC to 70(100) MHz (UM-(I-)10.6) HgCdTe IR detection modules. A thermoelectrically cooled (for some models optically immersed) photovoltaic detector, based on HgCdTe heterostructure, is integrated with a transimpedance, DC-coupled preamplifier, a fan and a thermoelectric cooler controller in a compact housing. Vigo System’s LabM series of programmable detection modules enable control of many parameters, such as bandwidth and gain, even during normal operation. This opens up completely new possibilities to designers of measuring systems. In a fully analogue input circuit, many switching elements are used, even with a variable, digitally-controlled capacitance to compensate the transimpedance input stage. Within the LabM series, 3.0 µm to 7.5 μm and over 200 MHz (LabM-I-6) and 2 µm to 12 μm and DC to 100 MHz (LabM-I-10.6 ) HgCdTe programmable, laboratory IR detection modules are available, with optically immersed photovoltaic detectors based on HgCdTe heterostructure, integrated with a transimpedance, programmable preamplifier. Vigo System’s UHSM series of convenient and user‑friendly ultra-high-speed detection modules aims at LWIR applications requiring high-time-resolution or high-frequency-bandwidth optical detection. Electronics and mechanics have been designed specifically to support the propagation of high-speed signals. Within the UHSM series, 3 µm to 12 µm and over 1 GHz (UHSM-10.6) or 700 MHz (UHSM-I-10.6) HgCdTe ultra high speed „all-in-one” IR detection modules are available. Thermoelectrically cooled, photovoltaic detectors (optically immersed for UHSM-I-10.6), based on HgCdTe heterostructure, are integrated with a transimpedance, AC coupled preamplifier, a fan and a thermoelectric cooler controller in a compact housing. Vigo System’s MicroM is a micro-size detection module with uncooled photovoltaic multiple junction detector. It is optimized for operation in the spectral range from 2 μm to 12 μm and frequency bandwidth from DC to 10 MHz. It is easy to assemble in space-limited measuring systems for long wavelength infrared (LWIR) applications. Key Features: Very High Performance and Reliability Integrated TEC Controller and Fan (UM, UHSM) Very Small Size (MicroM) Single Power Supply: +5 VDC, +9 VDC DC Monitor (UM, SHSM) DC Offset Compensation (LabM) Parameters Configurable by the User (LabM): Output Voltage Offset; Gain (in 40 dB Range); Bandwidth (1.5 MHz/15 MHz/200 MHz); Coupling AC/DC; Detector’s Parameters (Temperature, Reverse Bias etc.) Sensitive to IR Radiation Polarization (UM(-I)-10.6, ) LabM-I-10.6, MicroM) Optimized for Effective Heat Dissipation Wide Frequency Bandwidth Over 1 GHz (UHSM) Compatible With Optical Accessories Cost-effective OEM Version Available Universal, Versatile & Flexible, Convenient to Use Fast Delivery Active Element Material: Epitaxial HgCdTe Hetereostructure Active (Optical) Area: 1x1 mm², 0.05x0.05 mm² Cut-on Wavelength λcut-on (10%): ≤2.0 to 3.0 μm Peak Wavelength λpeak: 5.2 to 9.5 μm Optimum Wavelength λopt: 6.0 to 10.6 μm Cut-off Wavelength λcut-off (10%): 6.7 to 12.5 μm Detectivity D*: ≥1.50x107 to ≥2.3×1010 cm·Hz1/2/W (λpeak), ≥5.0×106 to ≥1.5×1010 cm·Hz1/2/W (λopt) Output Noise Density vn (100 kHz): ≤70 nV/Hz1/2 to ≤400 µV/Hz1/2 Voltage Responsivity Rv: ≥1.2x102 to ≥6.5x104 V/W (λpeak), ≥5.0x101 to ≥3.6x104 V/W (λopt) Low Cut-off Frequency flo: DC to 300 Hz High Cut-off Frequency fhi: ≥1 MHz to ≥1.0 GHz Infrared Windows: None, wZnSeAR Acceptance Angle Φ: ~36° to ~85° Applications: Leak Detection; Gas Detection, Monitoring and Analysis (CO, CO2, NH3, NOx); CO2 Laser Measurements; Laser Power Monitoring & Control; Laser Beam Profiling & Positioning; Laser Calibration; Characterization of Pulsed Laser Sources; Flue Gas Denitrification; Fuel Combustion Monitoring at Power Plants and Other Industrial Facilities; Breath Analysis; Explosion Prevention; Contactless Temperature Measurement & Control; Semiconductor Manufacturing; Glucose Monitoring; Dentistry; Dual-comp Spectroscopy; Heterodyne Detection; LIDAR; Object Scanners; Time-resolved Fluorescence Spectroscopy; Free-space Optical Communication
Product number: SW11684
Manufacturer: