Swept Light Sources

1700-1750 nm; Output Energy ≤50 µJ; Repetition Rate ≤10 kHz; Pulse Width 2-5 ns; Pump Laser and OPO in Single Rugged Housing Our 170P0-1-50-S MID-IR tunable OPO (optical parametric oscillator) source combines pump laser and OPO in a single, rugged housing and generates laser pulses in the mid-infrared (MID-IR) range around 1700 nm – the applications for such wavelengths are mainly in the field of photoacoustic imaging, in addition to gas chromatography and other analysis tasks. The OPO’s wavelength can be tuned in an extended range from 1700 nm to 1750 nm. Other wavelength ranges (e.g. 1500 nm to 2000 nm) are available on demand. Using an electro-optical Q-switch, very short pulses with typical pulse widths of 2 ns to 5 ns are generated. If different wavelengths, repetition rates, pulse energies or pulse widths is what you are looking for, the laser experts at Elforlight (an AMS Company) are happy to specify, design and manufacture your customized OPO solution. Get in touch with us now to discuss your project’s requirements! Key Features: Tunable Wavelength Range: 1700 nm to 1750 nm (1500 nm to 2000 nm on request) Ideal for Cardiovascular Photoacoustic Imaging Pump Laser and OPO in Single Rugged Housing Operation Mode: Pulsed Pulse Width: 2 ns to 5 ns Pulse Repetition Rate: Up to 10 kHz Pulse Energy: 50 µJ @1 kHz, 30 µJ @5 kHz Beam Quality: Close to TEM00, M2 < 1.3. (Capable of Launch into Multimode Optical Fiber) Beam Profile: Circular Triggering: External Laser Pulse Trigger Option (Input Trigger Signal 5 V) Control: RS232 Interface With: Switch Laser On/Off, Set Laser Energy, Enable/Disable Emission Power Supply: 110 VAC to 240 VAC, 50/60 Hz, ~200 W Safety Features: Redundant Interlock, Warning Outputs Applications: Biomedical Photoacoustic Imaging; Gas Chromatography; Other

1.4-12 µm; Output Power 20-850 mW; Repetition Frequency 100, 200 MHz; Pulse Duration 1-5 ps; Beam Diameter 1-6 mm Chromacity has developed a range of tunable laser sources which span the short to long IR wavelength regions. The Chromacity Auskerry (formerly the Near-IR OPO) is Chromacity’s flagship tunable optical parametric oscillator (OPO) which generates light across 1.4 µm – 4.2 µm (7150 cm-1– 2400 cm-1). The Chromacity Auskerry tunable laser source can be integrated into an FTIR spectrometer, providing the ability to interrogate multiple chemical signatures in real time (at a high resolution). It has a broad bandwidth across the 3µm-3.5µm to quantify gases such as of methane, ethane and benzene in a single measurement with resolutions of 0.05cm-1. The high powers of the Chromacity Auskerry have demonstrated open-path stand-off detection measurements beyond 100m. The Chromacity Haskeir (formerly the Mid-IR OPO) is powered by a new generation of non-linear crystals which generate broad bandwidth coherent light across the long wavelength regions between 4.5 µm and 12 µm (2200 cm-1 to 850 cm-1). Spectroscopy across the fingerprint regime provides that ability to characterize volatile organic compounds with complex chemical signatures, and the high brightness of the Chromacity Haskeir OPO across 4.5 to 12µm can be used in a number of these set-ups. It can also be used to characterize and differentiate between compounds, such as VX and Sarin, as well as pharmaceutical powders such as aspirin and ibuprofen. Both picosecond OPOs deliver high power, broad band coherent light and are optically pumped by Chromacity’s high-power Chromacity 1040 femtosecond laser, which is fully integrated into the optical head to maximize stability and reduce the overall system footprint. Fiber delivery capability reinforces the inherent stability of Chromacity’s OPO systems and seamless OEM integration for industrial applications. Chromacity is the first laser manufacturer to remotely install ultrafast OPOs. Patent protected manufacturing and design processes have driven Chromacity to build truly robust and affordable OPO systems with drop-ship capability and plug & play functionality. With a wealth of expertise in optical parametric oscillator technology, non-linear optics and optical fiber delivery, the Chromacity team are able to consider a wide range of options to help meet your requirements. If you have a specific request, please don’t hesitate to contact AMS Technologies. Key Features Chromacity Auskerry: Compact Laser Housing With an Integrated Pump Source Coherent Beam With Broadband Coverage Intuitive Web Browser Interface Remote Installation Capability Signal Wavelength: 1.4 µm to 1.8 µm Pulse Duration: ~1 ps to 5 ps Signal Average Power: Up to 850 mW (@1.5 µm) and >350 mW Across the Range Idler Average Power: Up to 350 mW (@3.3 µm) With >200 mW Across the Range Idler Wavelength: 2.4 µm to 4.2 µm Pump Source: Fully Integrated Chromacity 1040 Pump Laser Residual Pump Power (@1040 nm): >300 mW (Depending on OPO Wavelength) Repetition Frequency: 100 MHz Beam Diameter: Signal 1 mm to 2 mm, Idler 3 mm to 6 mm Control Interface: Web Browser Interface, Ethernet and Serial Port (RS232) Also Available Cooling: Air-cooled Electrical: 110-240 VAC, 50-60 Hz, 80 W Dimensions Chromacity Auskerry Module: 814 mm x 255 mm x 86 mm (LxWxH) Dimensions Control Unit: 483 mm x 285 mm x 86 mm (LxWxH) Key Features Chromacity Haskeir: Output Wavelength Tunability: Across 4.5 µm to 12 µm (2000 cm-1 to 850 cm-1) Output Power: Up to 100 mW @4.5 µm to 7 µm, Up to 20 mW @12 µm Quasi-CW, Providing Instantaneous Broad Bandwidth Spectra Repetition Frequency: 100 MHz or 200 MHz Available Pump Source: Fully Integrated Chromacity 1040 Pump Laser Remote Installation Capability Control Interface: Web Browser Interface, Ethernet and Serial Port (RS232) Also Available Crystals with Different Central Wavelengths Available Crystal Specifications: Quasi-phase Matching Crystal Design – Wavelength Tuning via Multi-grating (Discrete) or Fan-out (Continuous) Structures Pump Source: Integrated 1040 Pump Source (Access to Depleted 1040 Pump on Request) Cooling: Air-cooled, No Water Required Electrical: 110-240 VAC, 50-60 Hz, 80 W Dimensions Chromacity Haskeir Module: 970 mm x 245 mm x 82 mm (LxWxH) Dimensions Control Unit: 483 mm x 285 mm x 86 mm (LxWxH) Weight: 16 kg (Laser Head), 2 kg (Control Unit) Applications: Laser Spectroscopy, Including FTIR Spectroscopy, Stand-off Detection, Identification of Volatile Compounds; Nonlinear Physics Research; Material Characterization; Interrogation of Photonics Integrated Circuits (PIC); Multi-species Gas Analysis; Telecoms; Quantum Research; Explosive Detection

3-5, 7.5-13 µm; Output Energy 4 µJ; Repetition Rate 0.3, 1 kHz; Pulse Width 30-50 ns; Peak Output Power 5 W, ≤100 W; Linewidth ≥100 MHz Based on an orientation-patterned GaAs crystal, Teem Photonics’ Mid-IR, Optical Parametric Oscillator (OPO) pulsed source combines a wide spectral tunability, from 7.5 µm to 13 µm or 3 µm to 5 µm, with a very narrow linewidth down to 100 MHz. With the optional additional Optical Parametric Amplifier (OPA) stage, the source also features high peak power (100 W) and an energy of 4 µJ per pulse. This OPO source converts the input signal from a 2 μm pump laser into a tunable Mid-IR beam using a nonlinear crystal. Its single longitudinal mode output features a kHz repetition rate and a few tens of ns of pulse duration. One of the widely tunable OPO source’s main applications is LIDAR remote gas detection in the whole LWIR or MWIR spectral region – implemented in a LIDAR system and tested in the field, the source allowed to successfully detect different toxic gas at a distance of 300 m. For more information on the widely tunable OPO source, please contact the AMS Technologies OPO experts. Key Features: Wavelength Tunability: 7.5 µm to 13 μm and 3 µm to 5 μm Linewidth: Down to 100 MHz Single Longitudinal Mode Real-time Wavelength Control With Spectrum Analyzer Included Peak Power: 5 W; Up to 100 W With the OPA (Optical Parametric Amplifier) Option Output Energy per Pulse: 4 µJ Repetition Rate: Fixed at 300 Hz or 1 kHz Pulse Duration: 30 ns to 50 ns Compact OPO Source: ~297 mm x 210 mm x 80 mm (~A4 Footprint) Applications: Stand-off Gas Detection; Multi-species Gas Analysis; LIDAR; Other

Spectral Linewidth 10kHz; Tuning range 38-60nm; Output Power 7-17dBm; In-operation Power Adjust 7dBM-MAX; In-operation Frequency Adjust +/- 12GHz The Pure Photonics tunable laser is founded on a volume-produced micro-ITLA tailored for the Telecom industry, guaranteeing top-notch performance, quality, and reliability. A telecom-grade variant with unaltered hardware and optimized firmware is available, alongside a sensor-grade option featuring optimized hardware and firmware with customizable features. These configurations allow for tailored adjustments in output power performance (up to 17 dBm for C-band and 16 dBm for L-band) and frequency range (up to 60 nm). Additionally, each version can be further augmented with available operating features such as modulation and fast tuning. The low-noise tunable lasers are available either standalone, with an evaluation board (PPEB700), or integrated into select models such as the PPCL500 (or PPCL600), PPCL550 (or PPCL700), PPCL560 (featuring a DB-9 interface), or CoBrite enclosure. The comprehensive Pure Photonics full-band tunable laser solution boasts an exceptionally narrow linewidth (~10 kHz), markedly reduced low-frequency AM and FM noise, and a variety of operating modes within this low-noise realm. Moreover, the product facilitates access to any desired frequency set-point within the tuning range (C-band, L-band, or optionally up to 60 nm), with output power adjustable from as low as 7 dBm to as high as 18 dBm. Key features: Whispermode (PPCL600) 12 GHz Fine Tune Range (PPCL600) 30 GHz Fine Tune Range (PPCL700) Clean Sweep (PPCL700) Clean Jump (PPCL700) No-Drift mode (PPCL700) Clean Modulation (PPCL700) Clean Measurement (PPCL700) Applications: High-SNR (Signal-to-Noise-Ratio) Applications, Such as Sensing or Test and Measurement

Four wavelengths: 532 nm, 555 nm, 579 nm, 606 nm; pulse-by-pulse switchable with 2 kHz; Pulse Energy 20 µJ; Pulse Length <5 ns The diode-pumped solid-state laser TETRA emits very short laser pulses (< 5 ns) of high energy (up to 20 µJ) with four wavelengths in the visible range, which are particularly suitable for multispectral photoacoustic imaging. Using sophisticated technology, the TETRA laser can switch from pulse to pulse between these four wavelengths with a very high pulse repetition frequency of 2 kHz. Utilizing the Raman effect and the light of a 532 nm pump laser, the TETRA laser additionally generates the wavelengths 555 nm, 579 nm and 606 nm. A tunable optical filter separates the four wavelengths and routes one wavelength at a time to the optical output of the unit at a switching frequency of up to 2 kHz. This makes TETRA about ten times faster than tunable lasers based on OPOs (Optical Parametric Oscillators) – typical frequencies of such OPO systems range from 100 Hz to 200 Hz – while also being considerably more cost-effective. The wavelengths emitted by TETRA are well matched to the absorption curves of many blood components, making the laser particularly suitable for photoacoustic tomography in biomedicine. We have equipped TETRA with a number of features to meet the requirements of medical safety standards for use in clinical environments. For instance a fast, fault-tolerant shutter at the laser output interrupts the beam in the event of a fault in the shortest possible time in order to avoid any hazards to a patient.