PMJ PM Patch Cables

Product number: SW10534

Manufacturer: OZ Optics

Product information "PMJ PM Patch Cables"

Polarization Maintaining; 480 to 1625 nm; Fiber Type PANDA, others; Insertion Loss ≤0.4 to ≤1.5 dB; Operating Temperature Range -20 to +70 °C

OZ Optics’ PMJ series of polarization maintaining (PM) patchcords are based on a high precision butt-style connection technique. The PM axis orientation is maintained by using male connectors with a positioning key and a bulkhead female receptacle with a tightly toleranced keyway, ensuring good repeatability in extinction ratios and insertion losses.The polarization axis of a fiber is aligned with the connector key by rotating either the connector frame or the fiber itself until the polarization axis is in line with keyway of the connector. Once the fiber is correctly aligned, the alignment can be fixed with a drop of glue or epoxy.

OZ Optics minimizes backlash and rotational errors in the PM axis alignment by using specially designed PM ferrules and connector housings.Patchcords are normally offered pre-aligned and referenced with the slow axis aligned to the connector key for optimum coupling efficiency and extinction ratios. Non-angled FC PM connectors are also available unaligned and unlocked (rotatable) for lab use. Unless otherwise specified, pre-aligned patchcords are oriented such that the slow axis of the fiber is aligned with the key of the connector and locked. These patchcords maintain polarization to better than 20 dB. Higher extinction ratios are available upon request. In general, OZ Optics uses polarization maintaining fibers based on the PANDAfiber structure when building polarization maintaining components and patchcords. However OZ Optics can construct devices using other PM fiber structures, including 80 µm cladding sizes. If necessary, OZ Optics is willing to use customer supplied fibers to build devices.

OZ Optics uses a 2.00 mm housing key for its standard FC/PC PM connector design. This is known also as a type “R” keywidth. Also available are FC/PC connectors with a 2.14 mm housing key (Type “N”). Sleeve through adaptors are available to connect same size keys or to convert from a 2.00 mm to a 2.14 mm key connector. In addition to patchcords and sleeve through adaptors, OZ Optics provides male PM connectors and ferrules for fiber termination, bulkhead receptacles to attach fibers to devices as well as ferrules for different fiber sizes.

Key Features:

Terminations Available: FC/PC, SC, ST, LC, MU, E2000
Custom Ferrule Terminations Available
High Extinction Ratios (20 dB to 40 dB)
Low Insertion Losses (<0.2 dB typ.)
Custom Angles Available
Compatible with Industry Standard Connectors
Designed to Meet Telcordia Specifications

Applications: High-speed (10 Gbs / 40 Gbs) Telecommunications; Interferometric Sensors; Integrated Optics; Fiber Amplifiers; Coherent Telecommunications

Manufacturer "OZ Optics"

Similar products

HGPMJ Hermetically Sealable PM Patch Cables

Polarization Maintaining Patchcords, Glass Solder; Polarization Extinction Ratio >20, >25, >30 dB; Helium Leak Rate <10-8 ATM-cc/s; Operating Temperature -40 to +85 °C; Max. Installation Temperature +280 °C OZ Optics’ HGPMJ series of hermetically sealable polarization maintaining (PJ) patchcords with glass solder are designed for today's stringent requirements for component packaging. Utilizing bare fiber without costly metalization, and a proprietary sealing process, these patchcords feature a rugged hermetic feedthrough that can be soldered into an opto-electronic package using standard tin/lead solders. The hermetic seal tube is gold plated to promote good on-site sealing and corrosion resistance. These assemblies are capable of easily creating a seal that meets industry hermeticity requirements. PM fibers offer a means to control polarization of optical signals throughout the system, thus controlling Polarization Dependant Losses (PDL) and Polarization Mode Dispersion (PMD). This control is crucial in developing high speed, 40 Gbs, 100 Gbs coherent detection systems. In general, OZ Optics uses polarization maintaining fibers based on the PANDA fiber structure when building polarization maintaining components and patchcords. However OZ Optics can construct devices using other PM fiber structures. If necessary, OZ Optics is willing to use customer supplied fibers to build devices. Key Features: High Polarization Extinction Ratios up to 30 dB Single or Multiple Fiber Designs up to 24 Channels Ribbon Fiber Versions Available Alternative to fiber Metalization Methods Terminated with Round or Rectangular Ferrules Designed to Meet Telcordia Rrequirements Custom Configurations Possible Applications: Laser Diode Packaging; Waveguide Packaging; Integrated Optics Packaging; Vacuum Feedthrough Assemblies

Product number: SW10608

Manufacturer:

HPMJ Hermetically Sealable PM Patch Cables

Polarization Maintaining Patchcords. Metal Solder; Polarization Extinction Ratio >20, >25, >30 dB; Helium Leak Rate<10-8 ATM-cc/s; Operating Temperature -40 to +85 °C; Max. Installation Temperature +210 °C OZ Optics’ HPMJ series of hermetically sealable polarization maintaining (PM) patchcords with metal solder are designed for today's stringent requirements for component packaging. Utilizing metalized fiber and a proprietary sealing process, these patchcords feature a rugged hermetic feedthrough that can be soldered into an opto-electronic package using standard tin/lead solders. The hermetic seal tube is gold plated to promote good on-site sealing and corrosion resistance. These assemblies are capable of easily creating a seal that meets industry hermeticity requirements. PM fibers offer a means to control polarization of optical signals throughout the system, thus controlling Polarization Dependant Losses (PDL) and Polarization Mode Dispersion (PMD). This control is crucial in developing high speed, 40 Gbs, 100 Gbs coherent detection systems. In general, OZ Optics uses polarization maintaining fibers based on the PANDA fiber structure when building polarization maintaining components and patchcords. However OZ Optics can construct devices using other PM fiber structures. If necessary, OZ Optics is willing to use customer supplied fibers to build devices. Key Features: High Polarization Extinction Ratios up to 30 dB Single or Multiple Fiber Designs up to 24 Channels Ribbon Fiber Versions Available Can be Installed into Packages with Standard Solders Gold Plated Seal Tube for Easy Sealability and Corrosion Resistance Terminated with Round or Rectangular Ferrules Designed to Meet Telcordia Rrequirements Custom Configurations Possible Applications: Laser Diode Packaging; Waveguide Packaging; Integrated Optics Packaging; Vacuum Feedthrough Assemblies

Product number: SW10611

Manufacturer:

PMCONN PM Patch Cables

Polarization Maintaining Patchcords; 633 to 1550 nm; Fiber Type PM; Insertion Loss ≤0,3 to ≤1,5 dB; Return Loss ≥50, ≥60 dB LightComm Technology’s PMCONN series of polarization maintaining patchcords are manufactured with FC, SC, ST, LC, MU, SMA905 and other types of fiber connectors. LightComm Technology’s PMCONN series of patchcords offers low insertion loss, high return loss and high repeatability. PMCONN patchcords are available with both input and output connectors or as pigtail. All PMCONN patch cables are manufactured according to Telcordia GR-326-CORE. Key Features: Low Insertion Loss High Return Loss High Repeatability Connectors: FC/UPC, FC/APC, SC/UPC, SC/APC, etc. Applications: Fiber Devices; Fiber Systems

Product number: SW10558

Manufacturer:

Only 1 available

PMJ-3A3A-1300-7/125-3-1-1 PM Patch Cable

1290-1550 nm; 1280 nm Cutoff Wavelength; Ø3 mm, blue, PVC Jacket; FC/APCs; 1 m Cable Length The PMJ-3A3A-1300-7/125-3-1-1 polarization maintaining fiber patchcord is terminated with angle FC/APC connectors on both ends that are pre-aligned and locked on the slow axis. The PM patch cable is 1 m long and 3 mm OD jacketed.

Product number: C009680-6

Manufacturer:

€100.00*

PMJ-3A3A-1300-7/125-3-2-1 PM Patch Cable

1290-1550 nm; 1280 nm Cutoff Wavelength; Ø3 mm, blue, PVC Jacket; FC/APCs; 2 m Cable Length The PMJ-3A3A-1300-7/125-3-2-1 polarization maintaining fiber patchcord is terminated with angle FC/APC connectors on both ends that are pre-aligned and locked on the slow axis. The PM patch cable is 2 m long and 3 mm OD jacketed.

Product number: C017596-6

Manufacturer:

€115.00*

Only 1 available

PMJ-3A3A-1300-7/125-3-5-1 PM Patch Cable

1290-1550 nm; 1280 nm Cutoff Wavelength; Ø3 mm, blue, PVC Jacket; FC/APCs; 5 m Cable Length The PMJ-3A3A-1300-7/125-3-5-1 polarization maintaining fiber patchcord is terminated with angle FC/APC connectors on both ends that are pre-aligned and locked on the slow axis. The PM patch cable is 5 m long and 3 mm OD jacketed.

Product number: C017898-6

Manufacturer:

€170.00*

PMJ-3A3A-1550-8/125-3-1-1 PM Patch Cable

1460-1625 nm; 1450 nm Cutoff Wavelength; Ø3 mm, blue, PVC Jacket; FC/APCs; 1 m Cable Length The PMJ-3A3A-1550-8/125-3-1-1 polarization maintaining fiber patchcord is terminated with angle FC/APC connectors on both ends that are pre-aligned and locked on the slow axis. The PM patch cable is 1 m long and 3 mm OD jacketed.

Product number: C005068-6

Manufacturer:

€95.00*

Customers also viewed

PMJ-3A3A-980-6/125-3-1-1 PM Patch Cable

980-1300 nm; 970 nm Cutoff Wavelength; Ø3 mm, blue, PVC Jacket; FC/APCs; 1 m Cable Length The PMJ-3A3A-980-6/125-3-1-1 polarization maintaining fiber patchcord is terminated with angle FC/APC connectors on both ends that are pre-aligned and locked on the slow axis. The PM patch cable is 1 m long and 3 mm OD jacketed.

Product number: C022196-6

Manufacturer:

€110.00*

HN-PCF Photonic Crystal Fibers

Cut off Wavelength 650, 1000 nm; Mode Field Dia. 2.0, 4.3 µm; Zero-dispersion Wavelength 800 to 1000 nm; Optical Loss <30, <100 dB/km FORC-Photonics’ HN-PCF series is a new type of fibers, so-called micro-structured or photonic crystal fibers. This type of fibers features holes or inclusions of a material with different refractive index in the core and/or in the cladding. New dispersion and nonlinear properties can be observed in photonic crystal fibers. Most of the specific applications for micro-structured fibers require their own specific structure of the fiber. FORC-Photonics has the capabilities to design and fabricate a broad variety of fiber structures according to customer orders. Other parameters are available on the request. The HN-PCF-800 fiber is specially designed for supercontinuum generation using Ti-sapphire ultra-fast femtosecond lasers, while the HN-PCF-1040 fiber is specially designed for supercontinuum generation using Yb-doped picosecond or femtosecond ultra-fast fiber lasers. Key Features: Mode Field Diameter: 2.0, 4.3 µm Zero-dispersion Wavelength: 800 to 1000 nm Nonlinear Coefficient: 10, 90 1/W*km Optical Loss: <30, <100 dB/km Cut off Wavelength: 650, 1000 nm Applications: Supercontinuum Generating Using Ti-sapphire or Yb-doped Ultra-fast Lasers

Product number: SW11119

Manufacturer:

KTN Deflector Modules

Crystal-based Deflector; Scanning Angle ≤150 mrad; Scanning Speed ≤100 kHz; 488 to 3,500 nm NTT Advanced Technology’s KTN deflector module will realize new technological ideas, with ultra-high-speed scanning and arbitrary scanning. High-speed operation, which has not been supported by conventional technology, becomes possible because the light is controlled by electron transfer and an external electrical field without any mechanical moving parts. For example, when it is applied to a laser radar, higher speed object recognition will be possible compared with conventional technology. As the device features a simple structure of electrodes formed on a crystal and the chip size is very small, the optical polarization module can be mounted in a small-size housing of only 2 x 3 x 6cm. Flexible optical scanner operation is realized by devising an appropriate voltage supply method, because the voltage supply and direction of travel of the light beam correspond to each other, and the operation speed is very high. For example, the light scan angle can be made to move instantly among multiple points by inputting a digital signal, while continuous scan operation is realized by inputting an analog signal. In consequence, the device will be optimum for applications such as a laser radar or a laser scan display, by making use of its flexible operability from continuous operation to arbitrary scanning. Key Features: Wide Deflection Angle up to 150 mrad High Response Frequency up to 100 kHz Broad Wavelength Range 488 to 3,500 nm Polarization Maintaining Single Mode Optical Filter Applications: Laser Processing; Laser Scanning Microscopes; 3D-Measurement; Optical Communication; Displays; Optical Storage Media; Imaging; Sensing; Printers; Copiers; Forward Monitoring Sensors in Automobiles; OCT Swept Laser Source and Imaging; Flow Cytometry; High-speed Spectrometers; Optical Switches; Pulse Pickers

Product number: SW10560

Manufacturer:

PMJ-3A3A-850-5/125-3-5-1 PM Patch Cable

810-980 nm; 800 nm Cutoff Wavelength; Ø3 mm, blue, PVC Jacket; FC/APCs; 5 m Cable Length The PMJ-3A3A-850-5/125-3-5-1 polarization maintaining fiber patchcord is terminated with angle FC/APC connectors on both ends that are pre-aligned and locked on the slow axis. The PM patch cable is 5 m long and 3 mm OD jacketed.

Product number: C005062-6

Manufacturer:

€180.00*

FPS-003 Phase Shifter

780-1550 nm; Total Phase Shift >55π; IL <0.5 dB; RL >55 dB; PDL <0.05 dB; Residual Amplitude Modulation ±0.01 dB General Photonics’ FPS-003 all-fiber phase shifter/modulator combines a wide modulation bandwidth (up to 60 kHz) with low half-wave voltages to create a long-range device that can be driven by standard function generators. Like General Photonics’ other phase shifters, it employs all fiber construction and has low insertion loss and back reflection. In addition to fiber sensor systems, this compact device is ideal for fiber laser systems, fiber resonators, and fiber interferometers for precision phase tuning or phase modulation. Key Features: Wide Frequency Range - Operating Wavelength: 780, 1060, 1310 or 1550 nm Low Half-wave Voltage Large Phase Shift Range Compact Size: 31 x 31 x 14.5 mm Low Insertion Loss (IL): <0.5 dB (at 1550 nm, Excluding Connectors) Return Loss (RL): >55 dB (Excluding Connectors) Low Residual Amplitude Modulation: ±0.01 dB (@ 1550 nm) Total Phase Shift (@500 Hz, Vpp = 150 V): >55π (@ 1550 nm) Fiber Type: ClearCurve ZBL, 780 HP, PM, Other Half-wave Voltage (Vπ @ 500 Hz): 1 to 3 V Typical Resonance Frequency: 36 to -39 kHz Typical Vπ at Resonance Frequency: <150 mV Typical Polarization Dependent Loss (PDL): <0.05 dB at 1550 nm Capacitance of Piezo: 5 to 12 nF Maximum Applied Voltage: 150 V Applications: Fiber Interferometers; Fiber Laser Systems; Fiber Sensor Systems

Product number: SW11311

Manufacturer: