Skip to main content

MG Precision High Voltage Resistors

Product information "MG Precision High Voltage Resistors"

The MG Precision High Voltage Resistors has been proven through many years of use in equipment that demands the highest reliability and stability, including TWT amplifiers, X-Ray systems, geophysical instruments and medical electronic. Most models are manufactured with Caddock's non-inductive design.

KEY FEATURES

  • Single-resistor values as high as 10 000 Megaohms
  • Maximum continous operating voltages as high as 48 000 Volts
  • Resistance Tolerances from 1% to 0.1%
  • Temperature Coefficient, for standard resistance range, of 80 ppm/°C om combination with resistance tolerances as tight as 0,1%
Manufacturer "Caddock Electronics"
Related links of the manufacturer

Similar products

1776 Precision High Voltage Divider Networks
The exceptional performance of this extensive family of 1776 Precision Decade Resistor Voltage Dividers has been achieved through the special combination of advantages provided by Caddock's Tetrinox resistance films. This advanced film resistor technology provides the performance characteristics required by the precision input signal ciruits of both bench-type and laboratory digital instruments. There are now 39 standard models in the expanded family of Type 1776 precision resistor networks that include: 3, 4, and 5 - decade voltage dividers with ratios from 10:1 to 10,000:1. 1,200 volts continuous ratings and overvoltage to 2,000 volts. Many combinations of Ratio and Absolute Tolerance, and Ratio and Absolute Temperature Coefficient.
Product number: SW10263
Manufacturer:
1787 Precision Current Sense Resistors
Twelve standard models in five network arrangements of Caddock's 1787 Current Sense Resistor Networks provide the specific accuracy and resistance values required for a wide range of current measuring instruments and circuits. Type 1787 Current Sense Resistor Networks utilize Caddock's Micronox® resistance films and advanced high thru-put laser manufacturing capabilities to achieve many vital advantages in precision current measurement circuits, including laboratory and bench-type digital instrumentation: The thin-profile single-package configuration replaces as many as four discrete current sense resistors. The monolithic construction and standardized lead spacing simplify installation. Caddock Micronox® resistance films provide exceptional stability for improved long-term measurement accuracy.
Product number: SW10264
Manufacturer:
CC Precision Chip Resistors
The CC Low Resistance Precision Chip Resistor is the best choice for switching power supplies, motor speed controls, and high current sensing applications. The chip resistors with sizes of 2015 and 2520 for Wire Bond Style and 1512, 2015 and 2520 for Flip Chip Style, provides a resistance ranges of 0,010 Ω to 10 Ω. Key Features: Style FC - Flip Chip version for surface mount applications. Style WB - Wire Bond version for hybrid applications with metallized back surface for solder down heat sinking of the chip, includes bondable termination pads to receive aluminum wire bonds. Thermal resistance is provided to optimize high power designs when utilizing higher thermal conductivity circuit board substrates such as IMS or Alumina. Resistance range down to 0.010 ohm at ±5%, 0.050 ohm at ±2%,and 0.10 Ω at ±1%. Low inductance provides excellent high frequency and pulse response. High pulse handling and overload capability. Best choice for switching power supplies, motor speed controls, and high current sensing applications.
Product number: SW10260
Manufacturer:
CD Precision Chip Resistors
Type CD Low Resistance Precision Chip Resistors utilize the proven Caddock Micronox® resistance films to achieve the unique low resistance range in this family. The special performance features of the Type CD Low Resistance Precision Film Resistor include: Style FC - Flip Chip version for surface mount applications. Style WB - Wire Bond version for hybrid applications with metallized back surface for solder down heat sinking of the chip, includes bondable termination pedestals to receive aluminum wire bonds. Resistance as low as 0.010 Ω at ±1%. Pedestal terminals in this design provide an ultra low resistance connection pad which maintains the precision 0.010 Ω ±1% at the point of customer Kelvin connection to the resistor chip. The pedestal terminal with its copper core also provides heat spreading which enhances the high power handling capability. Thermal resistance is provided to optimize high power designs when utilizing higher thermal conductivity circuit board substrates such as IMS or Alumina. High pulse handling and overload capability. Low inductance provides excellent high frequency and pulse response.
Product number: SW10261
Manufacturer:
CHR Precision Chip Resistors
The CHR High Resistance Precision Chip Resistors are designed for use in extremely low signal detection/amplification circuits. Applications include: Photodiode signal amplification, photomultipliers, ionization detection, etc. These precision high resistance chip resistors can also be ideal for use as the input resistor for high impedance voltage division. KEY FEATURES: Style FC - Flip Chip version mount applications with solderable metallized termination pads on one side of the substrate, back side is bare ceramic Style WB - Wire Bond for hybrid applications
Product number: SW10262
Manufacturer:
HVD Ultra-Precision Voltage Dividers
The HVD Ultra-Precision Voltage Dividers are monolithic voltage dividers built with ceramic sendwich construction. These voltage dividers have ultra-precision performance in the range of 1500 Volts DC to 5000 Volts DC. These dividers are ideal for high performance voltage divisions applications in medical equipment, laboratory equipment, analytical instruments, etc.
Product number: SW10189
Manufacturer:
MP2060 Power Film Resistors
The MP2060 Clip Mount Power Film Resistor provides a power rating up to 60 Watts at +25°C case temperature for resistance values of 0,020 ohm and above. In the range of 0,015 ohm and below the TO-220 style resistor is current rated up to 60 Amps at +25°C case temperature. Key Features: Non-inductive Design TO-220 Style Package Equivalent to UL94 V-0 flammability rating Operation up to +150°C case temperature Excellent pulse/surge performance
Product number: SW10256
Manufacturer:

Customers also viewed

AvaSpec CompactLine Spectrometers
UV-NIR; 200-1750 nm; Resolution 0.05-50.0 nm; Sensitivity 38,000-665,000 Counts/µW per ms Integration Time; CMOS or InGaAs Array Detector; Interface USB 2.0; 95x68x20 mm Miniature spectroscopy redefined – that's what Avantes considers the CompactLine series spectrometers. The new generation, Avantes’ AvaSpec-Mini MK-II series (AvaSpec-Mini2048CL and AvaSpec-Mini4096CL) is definitely one of the smallest types of spectrometers on the market today. In cases where size matters, the AvaSpec CompactLine family offers spectrometers with the smallest form factor – only the size of a deck of cards. This enables easier integration of Avantes’ spectrometers into machines and handheld devices. Squeezing down the size hardly compromises the performance of the instruments but limits the customer a bit in the number of possible configurations. This instrument with excellent temperature and wavelength stability is easy to take anywhere you like and very well suited for handheld applications. The AvaSpec-Mini-CL series with CMOS detectors and advanced electronics and communications can be equipped with a 2048-pixel CMOS detector (AvaSpec-Mini2048CL) or Avantes’ first-to-the-market 4096-pixel array (AvaSpec-Mini4096CL). And the AvaSpec-Mini-NIR is a compact near-infrared spectrometer with InGaAs detector, based on Avantes’ popular AvaSpec-NIR256-1.7-EVO NIRLine series spectrometer. Enjoy the speed and enhanced native UV/NIR response of CMOS with an incredible resolution of up to 0.09 nm unavailable anywhere else. The low stray light design allows stray light levels from as low as 0.2% and the fast response time boasts data transfer speeds as fast as 4.6 ms/scan and integration times ranging from 30 to 50 s. Customization is possible when adequate volumes are needed. This makes the CompactLine especially suited for OEM users wanting to integrate a spectrometer into their own devices. To learn more about all the available options and to find the perfect setup that matches your needs, please contact AMS Technologies to discuss your wishes with our sales engineers. The possibilities are virtually endless! For customers with urgent needs and general flexibility in their specifications, Avantes keeps a variety of preconfigured AvaSpec-Mini-CL series CompactLine spectrometers in stock so they are readily available within a significantly decreased shipping time. All preconfigured spectrometers are available at discount pricing (as opposed to custom models) and include an upgrade to AvaSoft-Full. Available preconfigured models are: AvaSpec-Mini2048CL-U25: 2048 Pixels, Grating-MN1200-0.25 (200 to 450 nm), DCL200, 25 µm Slit AvaSpec-Mini2048CL-V25: 2048 Pixels, Grating-MN600-0.50 (350 to 885 nm), DCL200, OSC, OSF305, 25 µm Slit AvaSpec-Mini2048CL-I25: 2048 Pixels, Grating-MN600-1.00 (600 to 1100 nm), DCL200, OSF600, 25 µm Slit AvaSpec-Mini2048CL-UVI25: 2048 Pixels, Grating-MN300-0.3 (200 to 1100 nm), DCL200, OSC-UA, 25 µm Slit AvaSpec-Mini2048CL-VI25: 2048 Pixels, Grating-MN300-0.50 (360 to 1100 nm), DCL200, OSC, OSF305, 25 µm Slit AvaSpec-Mini4096CL-U10: 4096 Pixels, Grating-MN1800-0.25 (200 to 365 nm), DCL200, 10 µm Slit AvaSpec-Mini4096CL-V10: 4096 Pixels, Grating-MN600-0.50 (350 to 885 nm), DCL200, OSC, OSF305, 10 µm Slit AvaSpec-Mini4096CL-I10: 4096 Pixels, Grating-MN600-1.00 (600 to 1100 nm), DCL200, OSF600, 10 µm Slit AvaSpec-Mini4096CL-UVI10: 4096 Pixels, Grating-MN300-0.3 (200 to 1100 nm), DCL200, OSC-UA, 10 µm Slit AvaSpec-Mini4096CL-VI10: 4096 Pixels, Grating-MN300-0.50 (360 to 1100 nm), DCL200, OSC, OSF305, 10 µm Slit Key Features: Optical Bench: Symmetrical Czerny-Turner, 75 mm Focal Length Available Gratings: 300 to 3600 lines/mm Available Slit Sizes: 10 to 500 µm Wavelength Range: 200 to 1750 nm Resolution: 0.05 to 50 nm, Depending on Configuration Stray Light: 0.2% to 1% Sensitivity: 38,000 to 665,000 Counts/µW per ms Integration Time Detector: CMOS Linear Array, 2048 or 4096 Pixels; InGaAs Array, 256 Pixels (AvaSpec-Mini-NIR) Signal/Noise: 300:1 to 5000:1 A/D Converter: 16 Bit, 500 kHz or 6 MHz Integration Time: 10 µs to 50 s Interface: USB 2.0 Sample Speed With Store to RAM or On-board Averaging: 0.53 to 6.5 ms per Scan Data Transfer Speed: 1.2 to 8.9 ms/Scan Dimensions: 95 x 68 x 20 mm Applications: Handheld Instruments; Integration into OEM Machines and Handheld Devices; Food Analysis, Recycling
Product number: SW11399
Manufacturer: