F19111 Glass Polish Plate

146x146x3mm; 70 durometer         The process of polishing fiber optic connector endfaces requires both a hard, flat surface and a cushioned pad. Our fiber optic polish pads provide the necessary foundation for your polish film, enabling you to achieve the quality endface finish required of fiber optic connectors. Placing your fiber optic polishing film over the right type of pad ensures the removal of epoxy and enables you to polish your fiber optic connector without destroying the pre-radius of the ferrule.  

The TK-375 kit includes the JIC-375 fiber optic stripper three hole, the ES-1964 electrician's scissor and the H-36 convenient molded two tool plastic pouch with metal clip by Jonard Tools. The JIC-375 fiber optic stripper Three hole model performs all common fiber stripping functions. The first hole of this fiber optic stripper strips the 1.6-3 mm fiber jacket down to the 600-900 micron buffer coating. The second hole strips the 600-900 micron buffer coating down to the 250 micron coating and the third hole is used to strip the 250 micron cable down to the 125 micron glass fiber without nicks or scratches. Handle is made of TPR (Thermoplastic Rubber). The electrician scissors are designed for heavy duty use. Made of chrome vanadium steel with a special hardening process for greater durability and nickel plated for that professional look. The electrician scissors are notched to strip 18-20 and 22-24 AWG wire and one blade is serrated. A scraper and file are on the back of the blade. Holds edge even when used on fiber and Kevlar based cables.  

ST/SC/FC; stainless steel When hand polishing fiber optic connectors, you can't afford to leave anything to chance.  These Fiber Optic Hand Polishing Discs, or hockey pucks as some installers call them, enable you to achieve quality endface finishes and consistent results time after time.  

KimWipes Lint-Free Wipers: light-duty wiper specifically designed for delicate tasks

5 inch Disc; Grit 30 µm; Silicon Carbide; Stainless Steel and Ceramic Ferrule; no PSA The 46P-30-5D fiber optics polishing film from Nanolap comes in a pack that contains 10 pieces.

850-1310 nm; bend insensitive; Max Operating Temperature 180 °C; Core Diameter 50 µm; Coating Outside Diameter 245 µm Multi mode mid-temperature specialty optical fibers for harsh environments; non hermetic. Key optical specifications Operating Wavelength (nm)  850, 1060, 1300 Cutoff Wavelength (nm)  n/a Maximum Attenuation (dB/km)  2.5 @ 850 nm    0.7 @ 1300 nm Bandwidth (MHz-km) @ 850 nm High Performance EMB  950 Bandwidth (MHz-km) @ 850 nm Legacy Performance OFL  700 Bandwidth (MHz-km) @ 1300 nm Legacy Performance OFL  500 Numerical Aperture  0.20 ± 0.015                Key geometric, mechanical and environmental specifications Core Diameter (µm)  50 Cladding Outside Diameter (µm)  125 Coating Outside Diameter (µm)  245* Core-to-Cladding Offset (µm)  ≤ 1.5 Standard Lengths  500 m, 1 km, 2 km, 5 km Proof Test (kpsi)  100 Operating Temperature (°C)  -60 to 180** Coating  Mid-Temperature Acrylate Optional Hermetic Layer * 200 μm also available for 150° only** Also fully qualified at 165°C                   Performance characteristics (values in this table are nominal or calculated) Refractive Index Profile  Graded Index Bend Loss (7.5 mm radius; 2 turns) (total induced attenuation)  ≤ 0.2 @ 850 nm    ≤ 0.50 @ 1300 nm Recommended Minimum Bending Radius (mm)  7.5