Skip to main content

2,2A Laser Diode Driver - WLD3343

Product information "2,2A Laser Diode Driver - WLD3343"

The WLD3343 is an easy-to-use analog circuit for space constrained laser diode applications. The WLD3343 maintains precision laser diode current (constant current mode) or stable photodiode current (constant power mode) regulation using electronics that are compatible with any laser diode type. Safely supply up to 3 Amps of current to your laser diode from a single +5 Volt power supply. Excellent for VCSELs, electro-optical equipment, and medical/dental systems.

Key Features:

  • Low Cost
  • Slow Start Laser Diode Protection
  • Drive Up to 3 Amps Output Current
  • Constant Current or Power Operation
  • Compatible With Any Laser Diode Type
  • Small Package Size (1.30" X 1.26" X 0.313")
  • Voltage Controlled Setpoint
  • TTL Compatible Shutdown Pin
  • Adjustable Current Limit
  • Adjustable Current Range
  • 2 MHz Constant Current Bandwidth
  • Over Temperature Shutdown
  • 14-Pin DIP PCB Mount
Manufacturer "Wavelength Electronics"
Related links of the manufacturer

Similar products

0,5A Laser Diode Driver PCB Mount PLD500
The PLD Series Laser Diode Drivers deliver the reliability and performance you expect from a Wavelength Electronics laser driver in a compact and easy-to-integrate package. Tens of thousands of  PLD drivers are deployed in particle counters, manufacturing vision systems, wavefront scanners, fiber aligners, and other laser systems around the world, proving beyond doubt the reliability and  stability of the design.The PLD drivers operate from a single 5 V power supply. To accommodate high compliance lasers, or multiple stacked lasers, the PLD laser diode drivers allow the laser to be driven from a separate power supply up to 30 V.
Product number: C009004-1
Manufacturer:

€487.12*
1,5A QCL Driver - QCL1500
The QCL OEM Series drivers use patented1 circuitry to produce the lowest current noise density of any commercially available QCL driver. The 500 mA QCL driver exhibits noise performance of 0.5 µA RMS to 100 kHz, and average current noise density of 1 nA / √Hz - the lowest available. In order to maintain their characteristically tight center linewidths and minimize jitter, quantum cascade lasers must be powered by drivers with exceptionally low current noise density. Our customers have reported achieving narrower linewidths with these drivers than any other they've used.Key Features Off-the-shelf models at 500 mA, 1 A, 1.5 A, 2 A Can be delivered in other current ranges up to 2 A Compliance voltage 16 V (standard), Compliance 7-20 V with factory modification Safety features protect your QCL investment Adjustable soft-clamping current limit Brown-out, reverse-voltage, & over-voltage protection Driver over-temperature protection circuit Relay shorts output when current is disabled Local and Remote Power-On and Enable control,TTL-compatible Analog modulation input between -5V and +5V.
Product number: C019337-6
Manufacturer:

€3,136.15*
1.25A Laser Diode Driver PCB Mount - PLD1250
The PLD Series Laser Diode Drivers deliver the reliability and performance you expect from a Wavelength Electronics laser driver in a compact and easy-to-integrate package. Tens of thousands of PLD drivers are deployed in particle counters, manufacturing vision systems, wavefront scanners, fiber aligners, and other laser systems around the world, proving beyond doubt the reliability and stability of the design. The PLD drivers operate from a single 5 V power supply. To accommodate high compliance lasers, or multiple stacked lasers, the PLD laser diode drivers allow the laser to be driven from a separate power supply up to 30 V. Key Features Models: 200 mA, 500 mA, 1.25 A, 5 A, and 6.5 A Operates from a 5 VDC supply Separate power supply can be used to drive high-compliance lasers up to 28 V Constant Current or Constant Power modes Safety features protect your laserAdjustable latching current limitSlow-start circuitryRelay shorts output when current is disabled Local and Remote Power-On and Enable controls Integral heatsink and fan on high current model
Product number: C019341-6
Manufacturer:

€529.48*
10A Laser Diode Driver Chassis Mount - PLD10K-CH
The PLD10K-CH is a 10 A Laser Diode Driver in a small chassis mount package. Operating from a single +5 V supply minimizes internal heat dissipation. Modular packaging makes it easy to integrate the PLD into your system. For applications that require a higher forward voltage, a separate laser diode power supply input lets you provide a higher compliance voltage.Key Features Models: 5 A, 10 A, 12.5 A 5 A and 10 A models operate from a single 5 VDC supply; 12.5 A model requires two supplies Separate power supply can be used to drive high-compliance lasers up to 28 V Constant Current or Constant Power modes Safety features protect your laserAdjustable latching current limitSlow-start circuitry Local and Remote Enable controls
Product number: C008974-6
Manufacturer:

€698.92*
Only 2 available
10A Laser Diode Driver PCB Mount - PLD10000
The PLD10000 is powered by a 5 V supply, and the laser can be driven from the same supply. High-compliance lasers can be driven by using a separate supply up to 30 V. Key Features Two models: 10 A and 12.5 A output current PLD10000 can be operated from a 5 VDC supply Separate power supply can be used to drive high-compliance lasers, up to 27.5 V Constant Current or Constant Power modes Safety features protect your laserAdjustable latching current limitSlow-start circuitry Remote Enable controls Optimized heatsink and fan simplifi es integration
Product number: C006586-6
Manufacturer:

€698.92*
12,5A Laser Diode Driver Chassis Mount PLD12.5K-CH
The PLD12.5K-CH is a 12.5 A Laser Diode Driver in a small chassis mount package. Modular packaging makes it easy to integrate the PLD into your system. For applications that require a higher forward voltage, a separate laser diode power supply input lets you provide a higher compliance voltage. One power supply is required for the internal electronics; a separate supply is required to power the laser diode.Key Features Models: 5 A, 10 A, 12.5 A 5 A and 10 A models operate from a single 5 VDC supply; 12.5 A model requires two supplies Separate power supply can be used to drive high-compliance lasers up to 28 V Constant Current or Constant Power modes Safety features protect your laser »» Adjustable latching current limit»» Slow-start circuitry Local and Remote Enable controls
Product number: C008990-6
Manufacturer:

€808.07*
Only 2 available
12,5A Laser Diode Driver PCB Mount - PLD12500
The high current PLD drivers couple the high-reliability architecture of Wavelength Electronics' lower-current PLD Series with a robust high-current output stage. Tens of thousands of PLD drivers are deployed in laser systems around the world, proving beyond doubt the reliability and stability of the design. PLD Series laser power supplies are found in fiber laser pumping, materials processing, pyrotechnic ignition, industrial welding and cutting applications, and laser diode LIV testers. It is CE certified. A PDF version of the Declaration of Conformance is available.The PLD10000 drives up to 10 A, and the PLD12500 drives up to 12.5 A. With a compliance voltage capability of 27.5 volts, these PLD drivers are ideal for driving laser bars and stacks for high-power industrial applications. Lower-current drivers are offered in the PLD Series, available in SIP PCB-mounted models at 200 mA, 500 mA, 1.25 A, 5 A, and 6.5 A output.Key Features Two models: 10 A and 12.5 A output current PLD10000 can be operated from a 5 VDC supply Separate power supply can be used to drive high-compliance lasers, up to 27.5 V Constant Current or Constant Power modes Safety features protect your laserAdjustable latching current limitSlow-start circuitry Remote Enable controls Optimized heatsink and fan simplifies integration
Product number: C006603-6
Manufacturer:

€808.83*

Customers also bought

WEV302 Thermal Solution Kit
The WEV302 thermal solution kit can be used with following laser diode drivers and temperature controllers from Wavelength Electronics: WTCP5V5A, WTC3243, WTC3243HB, WHY5640, WLD3343, WLD3343-2L, WLD3343-3A, WLD3343-3L or WLD3343HB. The controllers operate to 500 mA without any additional heatsinking (assuming 5 V operation). To operate up to 1 A, add the WTW002 thermal washer and the WHS302 heatsink. To operate to the full 2.2 A, add a fan WXC303 (5 V) or WXC304 (12 V). For convenience, a kit with two 0.75" and two 1" screws is available: WXC305. The WEV302 includes the WTW002 thermal washer, the WHS302 heatsink, the WXC305 screw kit, and a +12 V fan WXC304. Two other kits are available: WEV300 (includes thermal washer, heatsink, and screw kit) or WEV301 (includes thermal washer, heatsink, screw kit, and a +5 V fan).Key Features Extends the Safe Operating Area of the WLD, WTC, WTCP, and WHY to the full-rated output current Allows the WLD, WTC, and WHY to operate at higher ambient temperatures Two fan voltage options: 5 V and 12 V  
Product number: C008696-6
Manufacturer:

€78.58*
WEV300 Thermal Solution Kit
The WEV300 thermal solution kit can be used with following laser diode drivers and temperature controllers from Wavelength Electronics: WTCP5V5A, WTC3243, WTC3243HB, WHY5640, WLD3343, WLD3343-2L, WLD3343-3A, WLD33ND-3L or WLD3343HB. The controllers operate to 500 mA without any additional heatsinking (assuming 5 V operation). To operate up to 1 A, add the WTW002 thermal washer and the WHS302 heatsink. To operate to the full 2.2 A, add a fan WXC303 (5 V) or WXC304 (12 V). For convenience, a kit with two 0.75" and two 1" screws is available: WXC304. The WEV300 includes the WTW002 thermal washer, the WHS302 heatsink, and the WXC305 screw kit. Two other kits that add fans are available: WEV301 (includes thermal washer, heatsink, screw kit, and a +5 V fan) or WEV302 (includes thermal washer, heatsink, screw kit, and a +12 V fan).Key Features Extends the Safe Operating Area of the WLD, WTC, WTCP, and WHY to the full-rated output current Allows the WLD, WTC, and WHY to operate at higher ambient temperatures Two fan voltage options: 5 V and 12 V
Product number: C008697-6
Manufacturer:

€38.12*

Customers also viewed

Only 1 available
PLDEVALPCB Evaluation Board
The PLDEVALPCB evaluation board is used with following laser diode drivers from Wavelength Electronics: PLD6500, PLD5000, PLD1250, PLD500 or PLD200. It simplifies benchtop operation of the PCB mount drivers and reduces prototyping time. This evaluation board does not include the laser diode driver itself. It includes a terminal strip for easy wiring to the power supply and laser diode. DVM cable ready test points monitor the setpoint, current limit, and photodiode signal voltages. These voltages are also on the terminal strip along with the LD Enable and Modulation inputs. Onboard switches select main power on, enable / disable, and whether the DVM point monitors laser or photodiode current. An LED indicates when main power is on. A shorting bar ties the high compliance input to +5 V. It can be removed for high compliance voltage operation. Remote computer control is available using the separate available USBKIT, which also allows graphing and datalogging.
Product number: C006568-6
Manufacturer:

€287.50*