UX9CJ5034ZJ7/SBMC3 (24V) Mini Rotary Compressor

Test-Function Board for Rotary Mini Compressor

Vapor Compression Chiller; 1000 W @+35°C (amb)/+25°C (water); Flow Rate 5.5 lpm @ 0.5 bar, Temperature Stability ≥±0.05 K at constant load; Power Supply 90-264 VAC Key Features: Recirculating Water Chiller Easy to be Integrated in Customer Application User-Definable PID Parameters and Fan Velocity Silent Operation with Low Vibration and Noise Ideal for Water Cooling Tasks up to 1000 W Customizable booster cooling capacity IoT Ready as an Option: Remote Operation, Monitoring and Service over Integrated Ethernet Interface Depending on the temperatures of coolant (water) and ambient, AMS Technologies’ mRC-C-1000-100/240 recirculating chiller provides approximately 1000 W (Twater = +25°C, Tambient = +35°C) in silent mode boostable to higher cooling capacities with higher fan speeds. The chiller contains a compressor-based refrigerant circuit as well as a closed, recirculating coolant (water) circuit. Due to its speed-controlled compressor, the mRC-C-1000-100/240 recirculating chiller offers low vibration and noise throughout the compressor’s BLDC speed range. The system’s features include global operability due to a universal 90 to 264 VAC power supply, as well as an optional integrated Ethernet interface allowing remote operation, monitoring and service. Further options are a gear pump providing 5 bar @5 l/min, CPC inlet and/or outlet fittings, external coolant filters or dust filters, and a hardware set for 19” rack mount (6U). For lower heat loads, we also carry a mRC-C-450-100/240 mini Recirculating Chiller with up to 450 W cooling capacity. Specifications: Cooling Capacity: nominal 1 kW (Twater = +25 °C, Tambient = +35 °C) Temperature Stability: +-0.05°C at constant load Available Pressure Head: 0.5 bar @ 5.5 lpm (standard), 5 bar @ 5 lpm (optional) Control: Local, RS232, IoT Ready, Interlock Power Supply: 90 to 264 VAC, 24 VDC Derivative for OEM integrations available on Demand Power Consumption: <750 W Options: 19” Rack Mount (6U); Ethernet / IoT Ready; Optional Pumps; CPC Inlet/Outlet Fittings; External Coolant Filters; External Dust Filters; Green Version Based on Propane (R290) as Refrigerant Dimensions: 443 x 283 x 675 mm, Main Body Without Filter Approval: CE (in process) Applications: Water Cooling of Lasers and Other Applications with up to 1000 W Heat Load

35 to 450 A RMS; Single Terminal; 28 to 45 kV; Mechanical Life 0.5 to 2 Mio. OperationsJennings Technology’s series of vacuum interrupters handle a wide range of voltage and current interrupt levels, and high-quality and highly reliable interrupters are available for the utility and industrial markets.Current interruption in a vacuum is recognized as the ideal switching technology in the medium voltage range, and it is also applied in high-voltage and low-voltage applications. Excellent switching capabilities and compact design make vacuum interrupters the most economical switching device solutions possible.Jennings vacuum interrupters feature an evacuated ceramic insulating envelope surrounding two contacts, one fixed and one movable. The movable contact is operated from the outside through a metallic bellows. Contacts are typically a copper alloy that is developed for use in AC voltage applications. The end plates are made of stainless steel or copper.With these features, vacuum interrupters can be expected to last the life of the equipment in which they are installed. Their interruption mechanism is independent of the current magnitude, so interruption can normally be anticipated at the first current zero with no restriking, as the dielectric strength of the contact gap recovers more rapidly than the recovery voltage can rise.Vacuum dielectric enables the interrupters’ contacts to be arranged close together, so circuit interruptions can be designed in a smaller envelope. With current interruption occurring in a vacuum, all arcing is confined within the vacuum interrupter body, so Jennings interrupters are noise-free and flash-free, avoid contact contamination as oxides and corrosion layers cannot form in vacuum, and they do not emit any greenhouse or toxic gases.Key Features: Long Life, High Reliability Controlled Contact Erosion Results in Virtually Maintenance-free Operation Fast Interrupting Speed Rapid Dielectric Recovery High Cycle Withstand Voltages Robust, Compact Design Environmentally Friendly Atmospheric Contact Contamination is Eliminated Noise-free and Flash-free Applications: Load Break Switches; Contactors for Industrial and Motor Control; Capacitor Bank Switching; Circuit Breakers; Specialty RF and DC Applications

Rotary Mini Compressor 2.4cc, 220VAC/ Electr. Controller / Mount. Kit incl. Inverter board Cooling Capacity of up to 500 W  Low Vibration of <20µm Low Noise of <42dBA

The FL500 is ideal for driving low power laser diodes. It operates from 3 to 12 V, so is compatible with Li+ battery operation. It can be configured as two totally independent 250 mA drivers or a single 500 mA driver. Compatible with Type A or B laser diodes. The FL500 allows for quick and easy operation in Constant Current (CC) mode. For simple CC mode operation the only components that are required are a power supply, an analog control voltage, your laser and optional filtering circuitry. Key Features: Small Package (0.75" x 0.45" x 0.255") Low Cost Brownout Protection 12-pin, SMT package, Reflow Compatible Slow Start Laser Diode Protection Drive Up to 500 mA Output Current Can be configured as two 250 mA drivers Voltage Controlled Setpoint TTL Compatible Shutdown Pin Adjustable Current Limit on Eval boards Adjustable Current Range Output 500 kHz sinewave Constant Current Bandwidth (100 kHz square wave)