Plastic Case High-Voltage Capacitors

Product number: SW11497

Downloads

High Voltage Capacitors General Atomics Brochure

Product information "Plastic Case High-Voltage Capacitors"

4.5-2,000 nF; 5-100 kV; ESL 6-90 nH

General Atomics provides leading-edge technology, extensive design expertise, quality manufacturing services, and comprehensive testing to deliver the highest quality plastic case capacitors to meet your requirements.

This series of plastic case capacitors features compact designs and supports a wide range of voltage, capacitance and application-specific requirements for high-voltage, low-inductance, pulsed applications.

If you would like more information or would like to find out more about General Atomics’ design and customization services (including custom high-voltage, very-high-voltage, high-energy-density and MIL-spec capacitors) to meet your specific voltage and capacitance requirements, please contact AMS Technologies.

Series	Type	Voltage	Capacitance & ESL	Key Features
PDS/PDSS	Fast Pulse Capacitors	100 kV	8 to 300 nF; 6 to 25 nH	Double-ended Plastic Case with Output Terminal Rails; Very Low Inductance, Low ESR. Sub-microsecond Pulse Rise Time to 100 kV
PM/PD	Pulse-discharge & DC Capacitors	25 to 62 kV	4.5 to 200 nF; 15 to 70 nH	Extended Foil; Double-ended Plastic Case Capacitors; Designed for Long Life and Fault Tolerance; Shot life >1x10⁹
S/SS	High-voltage 1 pps Capacitors	30 to 100 kV	0.04 to 1.0 µF; 15 to 40 nH	Single-ended Plastic Case Capacitors
DE	High-voltage Pulse-discharge Capacitors	5 to 50 kV	0.007 to 2.0 µF; 10 to 90 nH	Extended Foil, Double-ended Plastic Case Capacitors; Low-loss Dielectric
SE/SSE	High-voltage 1000 pps Capacitors	30 to 80 kV	0.04 to 0.15 µF; 15 to 25 nH	Extended Foil, Single-ended Plastic Case Capacitors; Very Low Inductance; High Repetition Rate

Applications: High-voltage, Low-inductance, Pulsed Applications; Particle Accelerators; Pulsed High-field Magnets; Excimer Lasers; High-power Microwave Sources; Pulse Shaping or Peaking in Large Pulse-power Systems; Military Research Projects and Fielded Systems

Manufacturer "General Atomics"

Similar products

AR Series Water-Cooled Oil-Filled Film Capacitors

6.0 µF to 1400 µF; 750 kv to 1250 kv; 300 kVA to 1600 kVA High capacitance at high power 6 to 1,400 µF capacitance 800 to 1,250 VRMS 240 to 2,000 ARMS 300 to 2,000 kVA Up to 25 kHz These oil-filled, water-cooled capacitors are aimed at particularly demanding applications such as high-voltage systems, pulsed lasers or induction heating. Select the right component from our portfolio of oil-filled capacitors. We offer a wide range of standard packing components and internal structures that make the capacitors suitable for energy storage, DC filtering, transient snubbing and high alternating current applications. The standard types offered here do not provide the solution to your challenge? We design, manufacture and test customized oil-filled capacitors according to your specifications - please contact us!

Product number: SW10338

Manufacturer:

CC Series Oil-Filled Film Capacitors

1 µF to 20 µF; 2,000 kv to 10,000 kv DC Filter Capacitors 1 to 20 µF capacitance Voltage 2,000 to 10,000 VDC Plated drawn steel cans Our oil-filled capacitors are aimed at particularly demanding applications such as high-voltage systems, pulsed lasers or induction heating. Select the right component from our portfolio of oil-filled capacitors. We offer a wide range of standard packing components and internal structures that make the capacitors suitable for energy storage, DC filtering, transient snubbing and high alternating current applications. The standard types offered here do not provide the solution to your challenge? We design, manufacture and test customized oil-filled capacitors according to your specifications - please contact us! Specifications Capacitance Range 1 to 20 µF Capacitance Tolerance ± 10 % standard, other tolerances available Operating Temperature -40 °C to +90 °C Insulation Resistance 25,000 MΩ•µF at 25 °C typical AC Ripple Voltage The sum of the DC voltage and peak AC ripple should not exceed the capacitor’s VDC rating. Additionally, the AC component should not exceed: 20 % of VDC at 60 Hz; 10 % of VDC at 400Hz; 5 % of VDC at 1 kHz; 1 % of VDC at 10 kHz Can Construction Drawn plated steel, epoxy paint optional Dielectric Kraft paper and polypropylene with environmentally compatible impregnant

Product number: SW10336

Manufacturer:

CHD Series Metallized Film Capacitors

0.01 µF to 0.33 µF ; VMAX 700 kV; SMAX 150 kVA 700 VRMS Working Voltage 150 kVA Max Power 250 ARMS Max Current Conduction Cooled Series & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.1 to 0.2 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 68 x 33 x 22.5 mm, 2 11/16 x 1 5/32 x 7/8 inch Weight 0.2 kg; .44 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10320

Manufacturer:

CHE Series Metallized Film Capacitors

0.2 µF to 2.0 µF ; 525 kV to 700 kv; 325 kVA to 400 kVA Up to 700 VRMS Working Voltage Up to 400 kVA Max Power Up to 800 ARMS Max Current Conduction Cooled Series & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.2 to 2.0 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 70 x 57 x 41 mm, 2 3/4 x 2 1/4 x 2 5/8 inch Weight 0.5 kg; 1.1 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10321

Manufacturer:

CHG Series Metallized Film Capacitors

0.1 µF to 1.32 µF ; 500 kV to 1000 kv; SMAX 300 kVA Up to 700 VRMS Working Voltage 600 kVA Max Power Up to 525 ARMS Max Current Conduction Cooled Series & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.18 to 1.2 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 49 x 49 x 30 mm, 1 15/16 x 1 15/16 x 1 3/16 inch Weight 0.25 kg; 0.5 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10322

Manufacturer:

CHH Series Metallized Film Capacitors

0.1 µF to 2.5 µF ; 400 kV to 700 kv; SMAX 160 kVA Up to 700 VRMS Working Voltage160 kVA Max PowerUp to 625 ARMS Max CurrentConduction CooledSeries & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.1 to 2.5 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 68 x 30.2 x 30.2 mm, 2 11/16 x 1 3/16 x 1 3/16 inch Weight 0.5 kg; 1.1 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10323

Manufacturer:

CHJ Series Metallized Film Capacitors

0.18 µF to 5.0 µF ; 300 kV to 700 kv; 180 kVS to 210 kVA Up to 700 VRMS Working Voltage Up to 210 kVA Max Power Up to 600 ARMS Max Current Conduction Cooled Series & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.18 to 5.0 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 76.2 x 50.8 x 36.5 mm, 3 x 2 x 1 7/16 inch Weight 0.27 kg; 0.6 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10324

Manufacturer:

CHL Series Metallized Film Capacitors

0.1 µF to 2.5 µF ; 400 kV to 700 kv; SMAX 160 kVA Up to 700 VRMS Working Voltage 160 kVA Max Power Up to 400 ARMS Max Current Conduction Cooled Series & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile.Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.1 to 2.5 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 68 x 32 x 30.2 mm, 2 11/16 x 1 1/4 x 1 3/16 inch Weight 0.5 kg; 1.1 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10325

Manufacturer:

CHM Series Metallized Film Capacitors

0.1 µF to 2.5 µF ; 400 kV to 700 kv; SMAX 160 kVA Up to 700 VRMS Working Voltage 60 kVA Max Power Up to 400 ARMS Max Current Conduction Cooled Series & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.1 to 2.5 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 70 x 32 x 30.2 mm, 23/4 x 11/4 x 13/16 inch Weight 0.5 kg; 1.1 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10326

Manufacturer:

CHN0 Series Metallized Film Capacitors

1.4 µF to 10 µF; 600 kV to 650 kv; SMAX 250 kVA Up to 650 VRMS Working Voltage 250 kVA Max Power Up to 600 ARMS Max Current Conduction Cooled Up to 10 µF This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 1.4 to 10 µF Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 80 mm (maximum) diameter x 70 mm high, 31/8 (maximum) diameter x 23/4 high Weight .75 kg; 1.7 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10327

Manufacturer:

CHN6 Series Metallized Film Capacitors

0.03 µF to 1.2 µF; 450 kV to 1000 kv; SMAX 120 kVA Up to 1000 VRMS Working Voltage 120 kVA Max Power Up to 125 ARMS Max Current Conduction Cooled This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.025 to 1.2 µF Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 30 mm diameter x 29 mm high, 1 3/16 “ diameter x 1 1/8 “ high Weight .15 kg; .33 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10328

Manufacturer:

CHX Series Water-Cooled Film Capacitors

0.06 µF to 0.69; VMAX 1500 kv; SMAX 300 kVA 1500 VRMS Working Voltage 300 kVA Max Power Up to 200 ARMS Max Current Water-Cooled This series of water cooled metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package. They are water cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.06 µF standard; up to 0.069 µF custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 53 mm diameter x 71 mm high, 2 1/16 “ diameter x 2 13/16 “ high Weight .36 kg; .79 lb Operating Temperature Up to +90 °C Cooling method Individually water-cooled Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10329

Manufacturer: