PLDEVALPCB Evaluation Board

Wavelength Electronics

€287.50*

Content: 1 pcs

Prices excl. VAT plus shipping costs

Only 1 available

Available, delivery time: 1-2 days

Product number: C006568-6

Manufacturer: Wavelength Electronics

Available stock: 1

Downloads

Product information "PLDEVALPCB Evaluation Board"

The PLDEVALPCB evaluation board is used with following laser diode drivers from Wavelength Electronics: PLD6500, PLD5000, PLD1250, PLD500 or PLD200. It simplifies benchtop operation of the PCB mount drivers and reduces prototyping time. This evaluation board does not include the laser diode driver itself. It includes a terminal strip for easy wiring to the power supply and laser diode. DVM cable ready test points monitor the setpoint, current limit, and photodiode signal voltages. These voltages are also on the terminal strip along with the LD Enable and Modulation inputs. Onboard switches select main power on, enable / disable, and whether the DVM point monitors laser or photodiode current. An LED indicates when main power is on. A shorting bar ties the high compliance input to +5 V. It can be removed for high compliance voltage operation.Â Remote computer control is available using the separate available USBKIT, which also allows graphing and datalogging.

Manufacturer "Wavelength Electronics"

Similar products

5R6-576 Digital Display for 5R7-001/5R7-002 TEC Temperature Controller

Accessory for TEC Temperature Controller; Display; 4-digit The 5R6-576 display is a 4-digit display for the 5R7-001/5R7-002 TEC temperature controller. The display features a minimum temperature display resolution of 0.1°. Using the switches on the display, the set point of the TEC temperature controller may be changed. There are two LED’s which indicate whether the readout is showing control temperature or set temperature. For instance, if the temperature is over 100° the readout will have a resolution of 0.1. Specifications: Temperature Readout: 4 Digit-Display Temperature Resolution: 0.01° Display Switches: Increasing the set point Decreasing the set point To choose whether to display the set temperature or the control temperature

Product number: C008977-6

Manufacturer:

€224.33*

5R7-551 Digital Display for 5R7-570 TEC Temperature Controller

Accessory for TEC Temperature Controller; Display Specifications: Temperature Readout: 4 Digit-Display Temperature Resolution: 0.01° Display Switches: Increasing the set point Decreasing the set point To choose whether to display the set temperature or the control temperature

Product number: C008983-1

Manufacturer:

€134.49*

5R7-584 Digital Display for 5R7-582 TEC Temperature Controller

Accessory for TEC Temperature Controller; Display; 4-digit; for 5R7-582 The 5R7-584 display is a 4-digit display for the 5R7-582 TEC temperature controller. The display features a minimum temperature display resolution of 0.1°. Using the switches on the display, the set point of the TEC temperature controller may be changed. There are two LED’s which indicate whether the readout is showing control temperature or set temperature. For instance, if the temperature is over 100° the readout will have a resolution of 0.1. Specifications: Temperature Readout: 4 Digit-Display Temperature Resolution: 0.01° Display Switches: Increasing the set point Decreasing the set point To choose whether to display the set temperature or the control temperature

Product number: C019404-6

Manufacturer:

€254.88*

Butterfly mount for MW-PK-0090-02 Laser Diode Driver

User interchangeable mount for using the cLDD base unit with butterfly type devices, including adapter boards for Type 1, Type 2 and custom pin-out routing (mount only).

Product number: C019427-6

Manufacturer:

€134.00*

Cables for Laser Diode Drivers and TEC Drivers

Connect Laser Diode Drivers and TEC Drivers With Loads, Power Supplies or Other Instrumentation; Unterminated or Pre-Confectioned With USB, SMA, BNC, DB, Teflon, Ring or Other Connector An extensive range of cables for Wavelength Electronics‘ laser diode drivers, quantum cascade laser drivers and temperature controllers is available. The spectrum reaches from simple USB, BNC or SMA cables to cables with DB or other connectors, one or both sides unterminated, all the way to sophisticated cable and connector assemblies and connector kits. These cables can be used to connect the Wavelength Electronics driver series with the power supply, the load, a computer or other instrumentation. More information can be found in the datasheet of the different series. Please contact AMS Technologies for more information. Free, effective and responsive technical support is available to simplify integration of Wavelength products into your OEM design. Standard products can be easily modified to meet your application requirements. Get in touch with the AMS Technologies experts to discuss your customized solution!

Product number: SW10845

Manufacturer:

DIL mount for MW-PK-0090-02 Laser Diode Driver

User interchangeable mount for using the cLDD base unit with DIL type devices (mount only).

Product number: C019425-6

Manufacturer:

€134.00*

Only 3 available

DISP-573 Digital Display for 5R-573 TEC Temperature Controller

Accessory for TEC Temperature Controller; DisplayThe DISP-573 display is a 4-digit display for the 5R-573 TEC temperature controller. The display features a minimum temperature display resolution of 0.1°. Using the switches on the display, the set point of the TEC temperature controller may be changed. There are two LED’s which indicate whether the readout is showing control temperature or set temperature. For instance, if the temperature is over 100° the readout will have a resolution of 0.1. Specifications: Temperature Readout: 4 Digit-Display Temperature Resolution: 0.01° Display Switches: Increasing the set point Decreasing the set point To choose whether to display the set temperature or the control temperature

Product number: C009011-1

Manufacturer:

€127.03*