Metal Case High-Voltage Capacitors

Product number: SW11498

Manufacturer: General Atomics

Downloads

High Voltage Capacitors General Atomics Brochure

Product information "Metal Case High-Voltage Capacitors"

2-64,000 µF; 1-100 kV; ESL 35-1200 nH

General Atomics provides leading-edge technology, extensive design expertise, quality manufacturing services, and comprehensive testing to deliver the highest quality metal case capacitors to meet your requirements.

This series of metal case capacitors features a wide range of capabilities from high-peak-current microsecond discharges to high energy density, self-healing, long-life designs.

If you would like more information or would like to find out more about General Atomics’ design and customization services (including custom high-voltage, very-high-voltage, high-energy-density and MIL-spec capacitors) to meet your specific voltage and capacitance requirements, please contact AMS Technologies.

Series	Type	Voltage	Capacitance & ESL	Key Features
CMX	Self-Healing Energy Storage Capacitors	2.8 to 13.2 kV	575 to 64,000 µF; 150 to 1,200 nH	Self-healing Metalized Film Capacitors in Welded Metal Cans; Up to 3.0 J/cc; Designed for Millisecond Discharge; Standard Ratings up to 13 kV and 255 kJ
CMF	Self-Healing Energy Storage Capacitors	5.6 to 26 kV	255 to 9,500 µF; 150 to 800 nH	Self-healing Metalized Film Capacitors in Welded Metal Cans; Designed for Millisecond Discharge; Standard Ratings to 26 kV and 200 kJ
C	Energy Storage High-voltage Capacitors	10 to 100 kV	3 to 830 µF; 35 to 100 nH	Extended Foil Capacitors in Welded Metal Cans; Standard Ratings up to 100 kV; Low Inductance, High Peak Current; Low-profile Bushings
DM	Metalized Capacitors	1 to 3 kV	25 to 750 µF; 75 to 200 nH	Self-healing Metalized Film Capacitors in Drawn Metal Cans; Designed for Industrial Rep-rate Applications; Peak Currents up to 11.6 kA
DP	General-purpose Pulse Capacitors	2 to 15 kV	2 to 185 µF; 50 to 200 nH	Extended Foil Capacitors in Drawn Metal Cans; For Pulsed Applications Such as Lasers, Flash Lamps and Other Circuits Where Moderate to Long Life is Required

Applications: High-voltage, Low-inductance, Pulsed Applications; Particle Accelerators; Pulsed High-field Magnets; Excimer Lasers; High-power Microwave Sources; Pulse Shaping or Peaking in Large Pulse-power Systems; Military Research Projects and Fielded Systems

Manufacturer "General Atomics"

Similar products

AR Series Water-Cooled Oil-Filled Film Capacitors

6.0 µF to 1400 µF; 750 kv to 1250 kv; 300 kVA to 1600 kVA High capacitance at high power 6 to 1,400 µF capacitance 800 to 1,250 VRMS 240 to 2,000 ARMS 300 to 2,000 kVA Up to 25 kHz These oil-filled, water-cooled capacitors are aimed at particularly demanding applications such as high-voltage systems, pulsed lasers or induction heating. Select the right component from our portfolio of oil-filled capacitors. We offer a wide range of standard packing components and internal structures that make the capacitors suitable for energy storage, DC filtering, transient snubbing and high alternating current applications. The standard types offered here do not provide the solution to your challenge? We design, manufacture and test customized oil-filled capacitors according to your specifications - please contact us!

Product number: SW10338

Manufacturer:

CC Series Oil-Filled Film Capacitors

1 µF to 20 µF; 2,000 kv to 10,000 kv DC Filter Capacitors 1 to 20 µF capacitance Voltage 2,000 to 10,000 VDC Plated drawn steel cans Our oil-filled capacitors are aimed at particularly demanding applications such as high-voltage systems, pulsed lasers or induction heating. Select the right component from our portfolio of oil-filled capacitors. We offer a wide range of standard packing components and internal structures that make the capacitors suitable for energy storage, DC filtering, transient snubbing and high alternating current applications. The standard types offered here do not provide the solution to your challenge? We design, manufacture and test customized oil-filled capacitors according to your specifications - please contact us! Specifications Capacitance Range 1 to 20 µF Capacitance Tolerance ± 10 % standard, other tolerances available Operating Temperature -40 °C to +90 °C Insulation Resistance 25,000 MΩ•µF at 25 °C typical AC Ripple Voltage The sum of the DC voltage and peak AC ripple should not exceed the capacitor’s VDC rating. Additionally, the AC component should not exceed: 20 % of VDC at 60 Hz; 10 % of VDC at 400Hz; 5 % of VDC at 1 kHz; 1 % of VDC at 10 kHz Can Construction Drawn plated steel, epoxy paint optional Dielectric Kraft paper and polypropylene with environmentally compatible impregnant

Product number: SW10336

Manufacturer:

CHD Series Metallized Film Capacitors

0.01 µF to 0.33 µF ; VMAX 700 kV; SMAX 150 kVA 700 VRMS Working Voltage 150 kVA Max Power 250 ARMS Max Current Conduction Cooled Series & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.1 to 0.2 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 68 x 33 x 22.5 mm, 2 11/16 x 1 5/32 x 7/8 inch Weight 0.2 kg; .44 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10320

Manufacturer:

CHE Series Metallized Film Capacitors

0.2 µF to 2.0 µF ; 525 kV to 700 kv; 325 kVA to 400 kVA Up to 700 VRMS Working Voltage Up to 400 kVA Max Power Up to 800 ARMS Max Current Conduction Cooled Series & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.2 to 2.0 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 70 x 57 x 41 mm, 2 3/4 x 2 1/4 x 2 5/8 inch Weight 0.5 kg; 1.1 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10321

Manufacturer:

CHG Series Metallized Film Capacitors

0.1 µF to 1.32 µF ; 500 kV to 1000 kv; SMAX 300 kVA Up to 700 VRMS Working Voltage 600 kVA Max Power Up to 525 ARMS Max Current Conduction Cooled Series & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.18 to 1.2 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 49 x 49 x 30 mm, 1 15/16 x 1 15/16 x 1 3/16 inch Weight 0.25 kg; 0.5 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10322

Manufacturer:

CHH Series Metallized Film Capacitors

0.1 µF to 2.5 µF ; 400 kV to 700 kv; SMAX 160 kVA Up to 700 VRMS Working Voltage160 kVA Max PowerUp to 625 ARMS Max CurrentConduction CooledSeries & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.1 to 2.5 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 68 x 30.2 x 30.2 mm, 2 11/16 x 1 3/16 x 1 3/16 inch Weight 0.5 kg; 1.1 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10323

Manufacturer:

CHJ Series Metallized Film Capacitors

0.18 µF to 5.0 µF ; 300 kV to 700 kv; 180 kVS to 210 kVA Up to 700 VRMS Working Voltage Up to 210 kVA Max Power Up to 600 ARMS Max Current Conduction Cooled Series & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.18 to 5.0 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 76.2 x 50.8 x 36.5 mm, 3 x 2 x 1 7/16 inch Weight 0.27 kg; 0.6 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10324

Manufacturer:

Customers also viewed

ML Series High Voltage AC/DC Power Supplies

Input Voltage 90-264 VAC; Max. Output Voltage 8-60 kVDC; Max. Power 300 W; Efficiency 85%; Voltage Regulation <0.005%; Current Regulation <0.1% of Rated Current XP Glassman’s ML Series of 300 W high voltage AC/DC power supplies are air-insulated, fast-response, chassis-mount units with tight regulation and extremely low arc discharge currents. A broad range of models is available with output voltage ranges from 0 to 8 kVDC through 0 to 60 kVDC. The ML Series is a family of sophisticated, medium-power, high voltage AC/DC power supplies that complies with current international safety and EMI directives. XP Glassman has packaged this series as a space-saving module to avoid the expense of front panels and displays. However, no compromises in performance and/or operating features have been made. The result is a power supply series that offers outstanding value for a wide range of demanding applications. The ML Series features “air” as the primary dielectric medium. No oil or encapsulation is used which would impede serviceability or increase weight. The ML Series also features high-speed dynamic voltage regulation – for load transients of 10% to 99% and 99% to 10%, the output voltage will recover to within 1% in less than 1 ms. Ripple is less than 0.05% of rated voltage at full load, and most models exhibit less than 1 J of stored energy. Automatic crossover from constant-voltage to constant-current regulation provides protection against overloads, arcs, and short circuits. Current mode operation is user-configured for constant-current regulation or current-trip operation. Continuous, stable adjustment from 0 to rated voltage or current is provided by panel-mounted 10-turn potentiometer with 0.05% resolution or by external 0 to 10 V signals. All ML Series supplies are fully RoHS compliant (2011/65/EU, Restriction of the use of hazardous substances). The ML Series supplies with 230 VAC input option (198 to 253 VAC RMS, 48 to 63 Hz) are fully compliant with the following European directives: 2014/30/EU, EMC Directive 2014/35/EU, Low Voltage Safety Directive EN61000-3-2, Line Harmonics Key Features: Maximum Output Power: 300 W Maximum Output Voltage: 8 to 60 kVDC Compact Module Air Insulated Low Ripple: <0.05% RMS of Rated Voltage + 0.5 V at Full Load Tight Regulation Constant Voltage/Constant Current Operation Static Voltage Regulation: <0.005% for Specified Line and Load Variations User-selectable Automatic Current Limiting/Regulation or Current Trip Protects Against All Overload Conditions, Including Arcs and Short Circuits PFC Option Assures Compliance with EN61000-3-2 Current Regulation: <0.1% of Rated Current From Short Circuit to Rated Voltage at Any Load Condition Maximum Output Current: 5 to 37 mA Input Voltage: 90 to 132, 180 to 264 VAC RMS, 48 to 420 Hz, Single Phase Efficiency: 85% Typical at Full Load Output Voltage Accuracy: 0.5% of Setting + 0.2% of Rated Output Voltage Repeatability: <0.1% of Rated Voltage Stored Energy: 0.38 to 2.34 J Voltage Monitor: 0 to +10 VDC Signal for 0 to Rated Voltage Current Monitor: 0 to +10 VDC Signal for 0 to Rated Current Stability: 0.01%/h After 0.5 h Warm-up, 0.05% per 8 h Polarity: Positive or Negative Polarity With Respect to Chassis Ground Interface Control Connector: 25-pin D-Sub Miniature Connector Control Functions: Voltage & Current Program/Monitor, HV Enable, HV Status, Safety Interlock, Current Trip/Limit Select, +10 V Reference, V/I Mode Status, Local Control Options: 100, 230 VAC Input, Slow Start Ramp, 0 to 5 V Voltage & Current Program/Monitor, Power Factor Correction (PFC), Control and Monitor via RS232, USB, Ethernet 3 Year Warranty Approvals: IEC61010-1:2010; EN61000-6-4:2007, Class A EN61000-6-2:2005 Operating Temperature: -20 to +50 °C Dimensions: 120.7 x 184.2 x 374.6/520.7 mm Applications: High Voltage, High Power Applications; Photonics; Healthcare (Analytical, Diagnostics, Detectors); Industrial; Semiconductor Manufacturing; Research; Other

Product number: SW11405

Manufacturer:

14100501 CLETOP type A (Blue tape) Cleaning Tools for Optics

Cleaning Tools for Optics;CLETOP;Lever Type Cassette ;Single-core;SC; FC; ST

Product number: C007906-6

Manufacturer:

€98.52*

pcs