IPEX-700 Excimer Lasers

Product number: SW11159

Manufacturer: LightMachinery

Downloads

IPEX-700 Excimer Lasers LightMachinery Datasheet

Product information "IPEX-700 Excimer Lasers"

193-351 nm; Energy 0.150-0.700 J; Max. Rep-rate 10-100 Hz; Average Power 3-40 W; Pulse Duration 12-20 ns FWHM; Beam Size 12x26, 12x28 mm; Medium Duty Cycle Operation

Designed for medium duty cycle operation in industrial and R&D environments, Light Machinery’s IPEX-700 series of excimer lasers deliver high-power ultraviolet laser machining combined with state-of-the-art performance. LightMachinery excimer lasers are used by leading R&D scientists all over the world.

The largest single cost of operating an excimer laser is laser gas consumption while running the laser (also known as dynamic gas lifetime). Incorporating LightMachinery’s proprietary ICON™ (Integrated Ceramic on Nickel) and patented exciPure™ technologies, IPEX lasers offer extremely long gas lifetimes, superior optical stability and precise control of laser operating parameters. With exciPure™, LightMachinery has achieved a 10x improvement in gas usage over competing lasers. This technological breakthrough leads to dramatically less cost to run your laser.

EasyClean automated valves fitted to the optics ports allow the laser chamber to be sealed and the gas fill / passivation to be retained while resonator optics are removed for cleaning and maintenance. Easy to use, simple to service and economical to operate, IPEX-700 lasers combine the benefits of high precision excimer processing with the lowest total cost of ownership and highest uptime in the market today.

IPEX-700 lasers are ideal for applications such as pulsed laser deposition (PLD) and can be operated from any computer using Windows 7 or 8 – a Microsoft® Surface Pro 3 is included for your convenience.

Key Features:

Medium Duty Cycle Operation
Wavelengths: 193 nm (ArF), 248 nm (KrF), 308 nm (XeCl), 351 nm (XeF)
Maximum Pulse Energy: 230 to 700 mJ
Stabilized Pulse Energy: 150 to 600 mJ
Stabilized Average Power: 3 to 40 W
Maximum Repetition Rate: 10 to 100 Hz
Pulse Duration: 12 to 20 ns FWHM
exciPure™ Technology for 10x Gas Lifetimes and Lowest Cost of Operation
No Expensive Cryogenic Gas Purifier Required
EasyClean Automated Optics Seals to Retain Gas Fill and Reduce Downtime During Optics Maintenance
Optional High-Brightness Optics for Applications Requiring Low Beam Divergence or Extended Coherence Length
High-stability Optics Mounts for Ultimate Beam Pointing Accuracy
Simple Integration into Industrial Processing Systems
Microsoft® Surface Pro 4 Remote Control for Simple Operation
Simplified Optical Maintenance, Retained Gas Fill and Passivation
No Realignment Required After Cleaning or Replacing Optics
Fast, Precise Energy Stabilization (<1.0%, KrF Gas) in Internal, Burst and External Trigger Modes
Removes Particulates and Maintains Optics Cleanliness
Pointing Stability: 200 rad
Beam Size: 12x26, 12x28 mm
Beam Divergence (Vertical x Horizontal): 1x3 mrad, Can be Reduced to 0.25 mrad With High-brightness Unstable Resonator Optics
Cooling Requirements: Optional Air Cooling up to 25 Hz Operation, Water Cooling at Higher Repetition Rates
Laser Gas: Premix or Individual Cylinders

Applications: Pulsed Laser Deposition; Precision Manufacturing; Material Processing; Drilling; Wire Stripping; Scientific Research; LIDAR; Laser Induced Breakdown Spectroscopy

Manufacturer "LightMachinery"

Similar products

Only 2 available

HeNe Laser Head 1122 Series

Product number: 1000002

Manufacturer:

€268.80*

IK Series Helium-Cadmium HeCd Laser Systems

325, 442 nm; Power 2-180 mW; Polarization Random, Linear; Beam Diameter <0.9-<1.8 mm; Beam Divergence <0.4-<1.0 mrad; Noise <5%-<20% P-P Kimmon Koha’s IK Series of Helium-Cadmium (HeCd) metal-vapour gas laser systems comprises 18 models with an output wavelength of 325 nm (UV), 10 models with an output wavelength of 442 nm (Blue) and 10 models combining both wavelengths in a dual-wavelength version. More than 40 years of He-Cd laser manufacturing allow Kimmon Koha to provide HeCd lasers with the highest polarized output power, reliability and average lifetime. The average lifetimes of Kimmon Koha’s IK Series HeCd lasers are the best in the business. All of IK Series lasers average 4,500 hours or more, and some models average over 8,000 hours. Do not be surprised if you get a system which will run for more than 10,000 hours. This superior performance along with the best warranty available has resulted in Kimmon Koha having the largest installed base of He-Cd lasers. For models and specifications please see the table below – please contact the AMS Technologies He-Cd laser experts for assistance in selecting the proper laser model for your application. Specifications: Model Wavelength Power Transverse Mode Polarization Polarization Ratio Beam Diameter 1/e² Beam Divergence Noise P-P @30 kHz - 2 MHz IK3023R-BR 325 nm 2 mW TEM00 Random N/A <0.9 mm <0.6 mrad <8% IK3052R-BR 5 mW TEMmultimode <1.5 mm <0.8 mrad IK3031R-C 5 mW TEM00 Linear >500:1 <1.0 mm <0.4 mrad IK3072R-C 10 mW TEMmultimode <1.8 mm <1.0 mrad IK3083R-D 10 mW TEM00 <1.0 mm <0.4 mrad <6% IK3101R-D 12 mW <0.5 mrad <10% IK3202R-D 25 mW TEMmultimode <1.6 mm <1.0 mrad IK3151R-E 18 mW TEM00 <1.2 mm <0.4 mrad IK3252R-E 30 mW TEMmultimode <1.8 mm <1.0 mrad IK3201R-F 25 mW TEM00 <1.2 mm <0.4 mrad <15% IK3401R-F 40 mW IK3452R-F 45 mW TEMmultimode <1.8 mm <1.0 mrad IK3301R-G 35 mW TEM00 <1.2 mm <0.5 mrad IK3501R-G 50 mW IK3552R-G 60 mW TEMmultimode <1.8 mm <1.0 mrad IK3802R-G 80 mW IK3102R-G 100 mW IK4123R-B 442 nm 15 mW TEM00 Linear >500:1 <0.9 mm <0.5 mrad <5% IK4153R-C 20 mW <1.0 mm IK4151R-C 30 mW <10% IK4401R-D 50 mW <1.1 mm IK4601R-E 75 mW <1.2 mm IK4101R-F 110 mW <0.4 mrad <15% IK4121R-G 140 mW IK4131I-G 150 mW IK4171I-G 180 mW <1.4 mm <0.5 mrad <20% IK5351R-D 325/442 nm 5/13 mW TEM00 Linear >500:1 <0.9/1.0 mm <0.5 mrad <10%/10% IK5352R-D 10/50 mW TEMmultimode <1.3/1.3 mm <1.0 mrad IK5451R-E 10/50 mW TEM00 <1.0/1.1 mm <0.5 mrad IK5452R-E 15/65 mW TEMmultimode <1.3/1.3 mm <1.0 mrad IK5551R-F 15/60 mW TEM00 <1.1/1.2 mm <0.5 mrad <15%/15% IK5552R-F 25/100 mW TEMmultimode <1.5/1.5 mm <1.0 mrad IK5651R-G 20/80 mW TEM00 <1.2/1.2 mm <0.5 mrad IK5652R-G 30/120 mW TEMmultimode <1.8/1.8 mm <1.0 mrad IK5751I-G 30/110 mW TEM00 <1.2/1.2 mm <0.5 mrad <15%/20% IK5752I-G 40/150 mW TEMmultimode <1.8/1.8 mm <1.0 mrad Applications: Photoluminescence; Raman Spectroscopy; Biomedicine/Bioengineering; Flow Cytometry; Litography/Grating Production; Photopolymer Exposure; Interferometry; Printing/Plate Making; Precision Measurement; Holography; Defect Inspection

Product number: SW11527

Manufacturer:

IMPACT-2000 Pulsed CO2 Lasers

9.3, 10.6 µm; Energy 0.15-5 J; Max. Rep-rate 12-500 Hz; Max. Average Power 60, 75 W; Beam Size 8x9-25x25 mm LightMachinery’s IMPACT-2000 series of pulsed CO2 lasers are optimized for 24/7 precision processing and drilling of non-metallic materials. The material interaction of the short, high-power pulses from TEA (Transversely Excited Atmospheric) CO2 lasers is quite different from that of long pulse and continuous CO2 lasers. High-definition processing with excellent edge quality can be obtained. Plastic materials can be selectively removed from a metal backing, leaving the metal layer untouched. For many applications, IMPACT-2000 lasers offer a lower cost alternative to excimer lasers. The IMPACT-2000 series of lasers all incorporate high reliability SSM (solid state modulator) switch technology as well gas filtering systems to ensure very high uptimes and low maintenance even at continuous 75 W power delivery 24/7. Impact-2000 series lasers are ideally suited for the selective removal or machining of non-metallic layers deposited on a metallic under-layer. Unlike conventional CO2 lasers, the short pulses and high peak powers of TEA CO2 lasers enable the surface layer to be removed (“ablated”) with little or no effect on the underlying metal substrate, and with minimal thermal damage (“heat-affected zone” or “HAZ”) to the surrounding polymer material. Key Features: Pulse Energy: 0.15 to 5 J Maximum Average Power: 60, 75 W Maximum Repetition Rate: 12 to 500 Hz Beam Size (Horizontal x Vertical) at Laser: 8x9 to 25x25 mm Megawatt Peak Powers Give Excellent Edge Definition in Non-metallic Materials Greatly Reduced Heat-affected Zone (HAZ) Compared to Conventional CO2 Lasers High-reliability SSM (Solid State Modulator) Switch Technology Internal Real-time Gas Filtering Systems High Up-times and Low Maintenance Even at Continuous 75 W Power Delivery 24/7 Operation at 10.6 or 9.3 µm Variety of Pulse Energy and Repetition Rate Models Cost-effective Alternative to Excimer Lasers in Many Processes Simple to Operate Low Cost of Ownership Applications: Drilling, Patterning and Ablation of Non-metallic Materials; Selective Removal of Polymer Materials Fom a Metal Substrate With no Damage to the Metallic Backing; Wire Stripping; Medical Device Components; Drilling of Controlled-release and Rapid-release Pharmaceutical Tablets and Capsules; Microvia-hole Drilling in Printed Circuits; Flex-circuit Processing; Laser Ultrasound Non-destructive Testing

Product number: SW11153

Manufacturer:

IMPACT-3000 Pulsed CO2 Lasers

9.0-11 µm; Energy 0.25-3.0 J; Max. Rep-rate 100-400 Hz; Max. Average Power 100-300 W; Beam Size 11x11, 19x19 mm LightMachinery’s IMPACT-3000 series of pulsed CO2 lasers are optimized for 24/7 precision processing and drilling of non-metallic materials. The material interaction of the short, high-power pulses from TEA (Transversely Excited Atmospheric) CO2 lasers is quite different from that of long pulse and continuous CO2 lasers. High-definition processing with excellent edge quality can be obtained. Plastic materials can be selectively removed from a metal backing, leaving the metal layer untouched. For many applications, IMPACT-3000 lasers offer a lower cost alternative to excimer lasers. The IMPACT-3000 series lasers are high-power (up to 300 W) short-pulse TEA CO2 lasers for surface layer removal and cleaning, non-destructive testing, photochemistry and scientific research. The highest repetition rate model (3400) is intended primarily as a source for laser ultrasound testing. For materials processing, their combination of high peak power and short pulses permits the removal of surface layers such as polymer coatings, paint or contamination from metal or composite backings with no damage to the underlying material and minimal heat-affected zone (HAZ). Their high average power offers fast throughput. In non-destructive testing, the high pulse repetition rate, short pulse durations and optimised mode structure of IMPACT-3000 lasers make them an ideal generation source for laser ultrasound (Laser UT) testing of composite matrix materials. For photochemistry and advanced scientific research, the high repetition rate and high average power can be utilised in applications as diverse as isotope separation and remote sensing / LIDAR. Key Features: Pulse Energy: 0.25 to 3.0 J Maximum Average Power: 100 to 300 W Maximum Repetition Rate: 100 to 400 Hz Beam Size (Horizontal x Vertical) at Laser: 11x11, 19x19 mm Beam Divergence, Half Angle: ~2.0, ~6.0 mrad Megawatt Peak Powers Give Excellent Edge Definition in Non-metallic Materials Greatly Reduced Heat-affected Zone (HAZ) Compared to Conventional CO2 Lasers High Up-times and Low Maintenance Even at Continuous >200 W Power Delivery 24/7 Operation at 9.0 to 11 µm Variety of Pulse Energy and Repetition Rate Models Cost-effective Alternative to Excimer Lasers in Many Processes Simple to Operate Low Cost of Ownership Applications: Surface Layer Removal and Cleaning; Polymer Coatings; Brake Lines; Paint Stripping; Mold Cleaning; Non-Destructive Testing; Laser Ultrasound Generation; Photochemistry and Spectroscopy; Isotope Separation; LIDAR and Remote Sensing

Product number: SW11154

Manufacturer:

IMPACT-4000 Pulsed CO2 Lasers

9.2-10.8 µm; Energy 0.25-5.0 J; Max. Rep-rate 12-150 Hz; Max. Average Power 60 W; Peak Power 1.0-12 MW; Beam Size 14x11, 25x25 mm LightMachinery’s IMPACT-4000 series of pulsed CO2 lasers are optimized for 24/7 precision processing and drilling of non-metallic materials. The material interaction of the short, high-power pulses from TEA (Transversely Excited Atmospheric) CO2 lasers is quite different from that of long pulse and continuous CO2 lasers. High-definition processing with excellent edge quality can be obtained. Plastic materials can be selectively removed from a metal backing, leaving the metal layer untouched. For many applications, IMPACT-4000 lasers offer a lower cost alternative to excimer lasers. The fully configurable IMPACT-4000 series lasers are designed for scientific and specialized applications. The short pulse of the thyratron-switched IMPACT-4000 series is ideal for ultrasound applications as well as applications in infrared chemistry. IMPACT-4000 lasers can be configured with a tunable option and set up in a master oscillator / power amplifier (MOPA) configuration with additional amplifiers to achieve the right power at the right wavelength for your application. IPACT-4000 series lasers can be supplied in a range of standard multi-module oscillators and MOPA configurations. The beam parameters (divergence, linewidth, mode structure, range of wavelength tuning, etc.) are mainly defined by the master oscillator, and the final energy is mainly defined by the number of power amplifier modules. Key Features: Pulse Energy: 0.25 to 5.0 J Maximum Average Power: 60 W Peak Power: 1.0 to 12 MW Gain Spike Duration: 100 ns Maximum Repetition Rate: 12 to 150 Hz Beam Size (Horizontal x Vertical) at Laser: 14x11, 25x25 mm Ultra-short Pulse Tunable TEA CO2 Lasers for Advanced Applications in Science and Industry Thyratron-switched for Low Jitter, Ultra-short Pulse (~100 ns) Operation Multi-module Oscillators and Oscillator-amplifier Systems Available Fully Configurable as Master Oscillator and Multiple Power Amplifier (MOPA) Stages Line-tunable (9.2 to 10.8 µm) or Operation at 9.3 or 10.6 µm as Standard Options Single Mode Operation (TEM00 / SLM) as Standard Option Variety of Pulse Energy and Repetition Rate Models Simple to Operate Low Cost of Ownership Applications: Plasma Diagnostics; Laser Photochemistry; Optical Damage Studies; Non-destructive Testing / Laser Ultrasound; Laser Propulsion and Particle Acceleration; Material Ablation & Surface Removal

Product number: SW11156

Manufacturer:

IPEX-800 Excimer Lasers

193-351 nm; Energy 0.150-0.700 J; Max. Rep-rate 10-200 Hz; Average Power 3-80 W; Pulse Duration 12-20 ns FWHM; Beam Size 12x26, 12x28 mm; High Duty Cycle Operation Designed for high duty cycle operation in a manufacturing environment, Light Machinery’s IPEX-800 series of excimer lasers deliver high power ultraviolet laser machining combined with state-of-the-art performance. The largest single cost of operating an excimer laser is laser gas consumption while running the laser (also known as dynamic gas lifetime). Incorporating LightMachinery’s proprietary ICON™ (Integrated Ceramic on Nickel) and patented exciPure™ technologies, IPEX lasers offer extremely long gas lifetimes, superior optical stability and precise control of laser operating parameters. With exciPure™, LightMachinery has achieved a 10x improvement in gas usage over competing lasers. This technological breakthrough leads to dramatically less cost to run your laser. EasyClean automated valves fitted to the optics ports allow the laser chamber to be sealed and the gas fill/passivation to be retained while resonator optics are removed for cleaning and maintenance. Easy to use, simple to service and economical to operate, IPEX-800 lasers combine the benefits of high precision excimer processing with the lowest total cost of ownership and highest uptime in the market today. Marking of ceramics is one of many applications for these versatile industrial tools. Key Features: High Duty Cycle Operation Wavelengths: 193 nm (ArF), 248 nm (KrF), 308 nm (XeCl), 351 nm (XeF) Maximum Pulse Energy: 230 to 700 mJ Stabilized Pulse Energy: 150 to 600 mJ Stabilized Average Power: 3 to 80 W Maximum Repetition Rate: 10 to 200 Hz Pulse Duration: 12 to 20 ns FWHM exciPure™ Technology for 10x Gas Lifetimes, Long Replacement Intervals and Lowest Cost of Operation No Expensive Cryogenic Gas Purifier Required EasyClean Automated Optics Seals to Retain Gas Fill and Reduce Downtime During Optics Maintenance Optional High-Brightness Optics for Applications Requiring Low Beam Divergence or Extended Coherence Length High-stability Optics Mounts for Ultimate Beam Pointing Accuracy Simple Integration into Industrial Processing Systems Simplified Optical Maintenance, Retained Gas Fill and Passivation No Realignment Required After Cleaning or Replacing Optics Fast, Precise Energy Stabilization (<1.0%, KrF Gas) in Internal, Burst and External Trigger Modes Removes Particulates and Maintains Optics Cleanliness Pointing Stability: 200 µrad Beam Size: 12x26, 12x28 mm Beam Divergence (Vertical x Horizontal): 1x3 mrad, Can be Reduced to 0.25 mrad With High-brightness Unstable Resonator Optics Cooling Requirements: Optional Air Cooling up to 25 Hz Operation, Water Cooling at Higher Repetition Rates Laser Gas: Premix or Individual Cylinders Applications: 24/ 7 Pulsed Laser Deposition; Precision Manufacturing; Material Processing; Drilling; Wire Stripping; Scientific Research; LIDAR; Laser Induced Breakdown Spectroscopy

Product number: SW11157

Manufacturer:

LaserMark Pulsed CO2 Lasers

9.3, 10.6 µm; Energy 0.5-5.7 J; Max. Rep-rate 12-150 Hz; Marks/h 43,200-540,000; Beam Size 14x11-25x25 mm LightMachinery's' LaserMark 950 and 960 series of pulsed CO2 lasers provide a fast, reliable means of applying high-quality permanent marks such as date and batch codes to a broad spectrum of products ranging from consumer product packages like beer labels, gelatin capsules or hair color tubes to miniature electronic components. LaserMark series lasers are designed for on-line marking and coding, creating perfect, crisp images on your products 24 / 7. These pulsed CO2 lasers complete the entire marking process in less than 1 µs so large-area, multi-character marking can be done "on the fly" without mark smearing or degradation that can occur in other types of laser marking. LightMachinery and AMS Technologies have the experience required to design, install and support your ultra-high reliability marking system. LaserMark lasers can mark on a wide variety of materials including inked paper and cards, foils, painted or anodized metal, glass and many types of plastic. The LaserMark series provides ease of operation, extreme reliability and high uptime in production environments. Solid state SSM high-voltage modulators and ultra-low gas flow ensure minimal consumable and maintenance costs. The LaserMark 960SSM series is sealed to NEMA 12 standards for general purpose applications. For more demanding operation, the LaserMark 950SSM series is NEMA 4 rated for direct high pressure hose down. Key Features: Super Fast "On the Fly"-Marking of Moving Parts (Mark Completed in 1 Millionth of a Second!) Eliminates Inks and Other High-cost/Environmentally-unfriendly Consumables Permanent, Multi-character Marks Applied Instantaneously in a Single Pulse Reliable, Proven Fourth-generation Product With Solid-state Technology for Low Cost of Ownership Wide Range of Beam Delivery Modules Available - Pulse Energy: 0.5 to 5.7 J Maximum Repetition Rate: 12 to 150 Marks per Second Marks per Hour: 43,200 to 540,000 Beam Size (Horizontal x Vertical): 14x11 to 25x25 mm Sealing Standard: IEC 529 (IP66), NEMA 4 or NEMA 12 High Voltage Switch: SSM (Solid State Modulator) Electrical Standards: IEC 204:EN 60204 Laser Gas Mix: LaserMark 5 Commercial Laser Premix Internal Gas Option for LaserMark 950 Series Water Cooling: 90 l/h at +10-+25°C RS-485 Interface Applications: Applying High-quality Permanent Marks Such as Date and Batch Codes to a Broad Spectrum of Products, Ranging From Consumer Product Packages Like Beer Labels, Gelatin Capsules or Hair Color Tubes to Miniature Electronic Component

Product number: SW11158

Manufacturer: