AvaLight-D(H)-S Deuterium-Halogen Light Sources

Accessories for Mightex collimated LED light sources comprise dedicated focusing modules and interchangeable collimating lenses, lightguide, microscope and fiber-optic adapters, microscope illumination tubes, connector tubes, a thread converter, empty filter/optics holders, a lightguide holder for converting Type-B LCS into Type-B GCS as well as accessories for beam combiners like a push-pull adjustable mount, a 11 mm LCS adapter or connecting plates. Six different ACC-LCS-F-xx focusing modules for collimated LED light sources are available, comprising modules for 11 to 48 mm clear-aperture collimated LED light sources with working distances from 5 to 100 mm. For details, please refer to the downloadable “Accessories for Collimated LED Light Sources Overview” and the downloadable installation drawings. Eight ACC-LCS-C-xx(-B) additional interchangeable collimating lenses for collimated LED light sources are used to produce different beam sizes with the same LED light source base: Four models with clear apertures of 11, 22, 38 and 48 mm as well as four variants for Type-B light sources. For details, please refer to the downloadable “Accessories for Collimated LED Light Sources Overview”. Four different LCS-LGA22-xxx lightguide adapters can be used to couple light from a 22-mm-diameter collimated LED light source into a lightguide. Variants for lightguides with ferrule diameters of 5, 6.35 (1/4”), 7 and 11.1 mm as well as a ferrule length of 15 mm or greater are available. For details, please refer to the downloadable “Accessories for Collimated LED Light Sources Overview” and the downloadable installation drawings. Eight different ACC-BC25-xxx microscope adapters allow to connect LCS collimated LED light sources and beam combiners to microscopes. Single LCS light sources as well as LCS-BC25 beam combiners or WLS sources can be connected to microscopes like Leica DMI, Olympus (IX & BX, other), Zeiss Axioskop, Nikon Eclipse, Eclipse E200 and LV-UEPI/2/A. For details, please refer to the downloadable “Accessories for Collimated LED Light Sources Overview”. A LCS-FPC-ADP-SMA fiber-optic adapter can be used to couple light from a LCS-Series collimated LED light source (22-mm aperture) into a fiber patchcord and accepts SMA connectorized fiber patchcords. Three different ACC-BC25-MIT-xxx microscope illumination tubes allow to couple a beam combiner or LCS-Series collimated LED light source into the infinity optical path of microscopes. The lengths of these microsope illumination tubes are designed for one beam-combiner distance (up to two LCS sources) or two beam-combiner distances (up to four LCS sources). For details, please refer to the downloadable installation drawing. Three different ACC-LCS-xxx connector tubes for LCS-Series collimated LED light sources are available, comprising a male-to-male C-mount connector with inner threads, a female-to-female C-mount connector with outer threads and a 15 mm extension tube for 22 mm clear-aperture LCS-Series light sources. For details, please refer to the downloadable “Accessories for Collimated LED Light Sources Overview” An ACC-LCS-27C adapter is available for converting M27 thread to C-thread. Two different empty filter/optics holders for 22 mm clear-aperture collimated LED light sources are available (ACC-LCS-H-22, ACC-LCS-EH). Both are excitation filter holders for 25.4 mm (1”) diameter filters with up to 5 mm thickness, with ACC-LCS-EH featuring a threaded output end to connect to Mightex LCS-LGA22-xxx lightguide adapters or ACC-BC25-xxx microscope adapters. For details, please refer to the downloadable “Accessories for Collimated LED Light Sources Overview” and the downloadable installation drawing. Mightex’s GCS-LGH-B-0515 lightguide holder is used to replace the collimating lens on a Type-B LCS in order to convert it to a Type-B GCS. This holder is suitable for lightguides with a ferrule diameter of 5 mm (typical 3-mm-core lightguides) and a ferrule length of 15 mm or greater. Mightex’s ACC-LCS-BC25-PPM push-pull mount for multi-wavelength beam combiners is user-adjustable. Currently, Mightex’s multi-wavelength beam combiners can only be used to directly combine 22-mm-diameter collimated LED light sources. For 11-mm-diameter collimated LED light sources, an ACC-BC25-011 mechanical adapter can be used to attach the LED sources to the beam combiners, before the 11-mm-diameter collimated LED sources can be combined. Three different ACC-BC25-CP-01/02/03 connecting plates are available to connect two or more multi-wavelength beam combiners together, with four screws included. For details, please refer to the downloadable “Accessories for Collimated LED Light Sources Overview” and the downloadable product overview.

Accessories for Mightex LED light sources comprise lightguide collimators, dedicated focusing modules for collimated LED light sources, various cables, fiber-optic adapters, microscope illumination tubes, connector tubes for LCS-Series light sources, a thread converter, empty filter/optics holders, a lightguide holder for converting Type-B LCS into Type-B GCS as well as accessories for beam combiners like a push-pull adjustable mount, a 11 mm LCS adapter or connecting plates. Four different lightguide collimators are used to either couple light from free space into a lightguide or collimate light from a lightguide to form a collimated (parallel) optical beam. Lightguide collimators are key components with numerous applications. For example, a lightguide collimator can project light from a lightguide into a uniform spot in free space. High-numerical-aperture aspherical lenses are used for precise collimation and maximum light throughput. The collimators feature adjustable focus from ~100 mm to infinity. Various lightguide ferrule diameters are supported. Customization is available for other ferrule diameters. For further details, please refer to the downloadable datasheet and the downloadable “Accessories for LED Light Sources Overview”. Six different ACC-LCS-F-xx focusing modules for collimated LED light sources are available, comprising modules for 11 to 48 mm clear-aperture collimated LED light sources with working distances from 5 to 100 mm. For details, please refer to the downloadable “Accessories for LED Light Sources Overview” and the downloadable installation drawings. Four different cables are available for FCS-, FFC-, GCS-, WFC- and WLS-Series LED light sources. Some cables feature push-pull connectors and/or are suitable for 4-channel light sources. For details, please refer to the downloadable “Accessories for LED Light Sources Overview”. A LCS-FPC-ADP-SMA fiber-optic adapter can be used to couple light from a LCS-Series collimated LED light source (22-mm aperture) into a fiber patchcord and accepts SMA connectorized fiber patchcords. Three different ACC-BC25-MIT-xxx microscope illumination tubes allow to couple a beam combiner or LCS-Series collimated LED light source into the infinity optical path of microscopes. The lengths of these microsope illumination tubes are designed for one beam-combiner distance (up to two LCS sources) or two beam-combiner distances (up to four LCS sources). For details, please refer to the downloadable installation drawing. Three different ACC-LCS-xxx connector tubes for LCS-Series collimated LED light sources are available, comprising a male-to-male C-mount connector with inner threads, a female-to-female C-mount connector with outer threads and a 15 mm extension tube for 22 mm clear-aperture LCS-Series light sources. For details, please refer to the downloadable “Accessories for LED Light Sources Overview”. An ACC-LCS-27C adapter is available for converting M27 thread to C-thread. Two different empty filter/optics holders for 22 mm clear-aperture collimated LED light sources are available (ACC-LCS-H-22, ACC-LCS-EH). Both are excitation filter holders for 25.4 mm (1”) diameter filters with up to 5 mm thickness, with ACC-LCS-EH featuring a threaded output end to connect to Mightex LCS-LGA22-xxx lightguide adapters or ACC-BC25-xxx microscope adapters. For details, please refer to the downloadable “Accessories for LED Light Sources Overview” and the downloadable installation drawing. Mightex’s GCS-LGH-B-0515 lightguide holder is used to replace the collimating lens on a Type-B LCS in order to convert it to a Type-B GCS. This holder is suitable for lightguides with a ferrule diameter of 5 mm (typical 3-mm-core lightguides) and a ferrule length of 15 mm or greater. Mightex’s ACC-LCS-BC25-PPM push-pull mount for multi-wavelength beam combiners is user-adjustable. Currently, Mightex’s multi-wavelength beam combiners can only be used to directly combine 22-mm-diameter collimated LED light sources. For 11-mm-diameter collimated LED light sources, an ACC-BC25-011 mechanical adapter can be used to attach the LED sources to the beam combiners, before the 11-mm-diameter collimated LED sources can be combined. Three different ACC-BC25-CP-01/02/03 connecting plates are available to connect two or more multi-wavelength beam combiners together, with four screws included. For details, please refer to the downloadable “Accessories for LED Light Sources Overview” and the downloadable product overview.

Accessories for Mightex’s GCS-Series of lightguide-coupled LED light sources comprise an electrical cable (product number ACC-GCS-C05), a heatsink for 3 mm core liquid lightguides (product number ACC-LLG-HS-03), a range of liquid lightguides and lightguide adapters as well as lightguide collimators. Nine different LLG liquid lightguides are available in three wavelength ranges (300 to 650 nm, 340 to 800 nm and 420 to 2000 nm), with 3 or 5 mm core for 5 or 7 mm ferrule diameters respectively, a numerical aperture (NA) of 0.59 and lengths of 1 or 2 m. For details, please refer to the downloadable “Accessories for Lightguide-coupled LED Light Sources Overview” and the downloadable installation drawing. Four different lightguide adapters for Type-A GCS-Series lightguide-coupled LED light sources are available. Each Type-A GCS device comes with a standard lightguide adapter for 5 mm diameter ferrule (A0510). Other adapters (as well as additional standard adapters) can be purchased separately, for lightguides with ferrule diameters of 5, 6, 7 or 8 mm and ferrule lengths of 10 mm or greater. For details, please refer to the downloadable “Accessories for Lightguide-coupled LED Light Sources Overview”. Four different lightguide adapters for Type-B GCS-Series lightguide-coupled LED light sources are available, for lightguides with ferrule diameters of 5, 7, 8 or 10 mm and ferrule lengths of 15 mm or greater. For details, please refer to the downloadable “Accessories for Lightguide-coupled LED Light Sources Overview”. Four different lightguide collimators are used to either couple light from free space into a lightguide or collimate light from a lightguide to form a collimated (parallel) optical beam. Lightguide collimators are key components with numerous applications. For example, a lightguide collimator can project light from a lightguide into a uniform spot in free space.High-numerical-aperture aspherical lenses are used for precise collimation and maximum light throughput. The collimators feature adjustable focus from ~100 mm to infinity. Various lightguide ferrule diameters are supported. Customization is available for other ferrule diameters. For further details, please refer to the downloadable datasheet and the downloadable “Accessories for Lightguide-coupled LED Light Sources Overview”.

HgAr, Ne, Ar, Zn, Cd Versions; 202.5-1704 nm; Optical Power 1.6 µW; Connector SMA-905; Power Supply 12 VDC, 260 mA, 85-240 VAC, 1.0 A The AvaLight-CAL-xxx is a spectral calibration lamp, available in Mercury-Argon (253.6 to 922.5 nm), Neon (337 to 1084.5 nm), Argon (696.5 to 1704 nm) Zinc (202.5 to 636.2 nm) and Cadmium (214.4 to 643.8 nm) versions. The major lines including their relative intensity and structures are shown in the downloadable datasheet. The standard SMA-905 connector supplies an easy connection between the lamp and optical fibers, making the AvaLight-CAL-xxx a low-cost wavelength calibration system for any fiber-optic spectrometer. AvaSoft-Full spectroscopy software includes an automatic recalibration procedure. The AvaLight-CAL-Mini, AvaLight-CAL-AR-Mini, AvaLight-CAL-Neon-Mini all come in the Mini-housing and are equipped with a connector at the rear enabling to switch the unit on/off remotely with a TTL signal. AvaLight-CAL light sources can also be delivered in rack-mountable version, to be integrated in Avantes 19” Rack-mount or the 9.5” desktop housing. Key Features: Calibration Light Source Available in a Variety of Wavelength Ranges (UV to NIR): 253.6 to 922.5 nm (HgAr), 337 to 966 nm (Ne), 950 to 1704 nm (Ar), 202.5 to 636.2 nm (Zn), 214.4 to 634.8 nm (Cd) Optical Power (in 600 µm Fiber): 1.6 µW Connector: SMA-905 Warm-up Time: 1, <10 min Lamp Lifetime: 1000, 5000 h Power Supply: 12 VDC, 260 mA, 85 to 240 VAC, 1.0 A Dimensions: 150 x 78 x 37, 175 x 110 x 44 mm Applications: Wavelength Calibration of Fiber Optic Spectrometers

200-1099 nm; Calibration Repeatability ±1.0%; Calibration Relative Uncertainty ±9%-±10%; Bulb Output 5, 80 µW cm-2 nm-1; Power Supply 100-240 VAC Calibrating your spectrometer has never been easier: Avantes’ AvaLight-DH-CAL series are NIST-traceable, calibrated light sources to measure absolute spectral intensity with. For calibrations in the ultraviolet (UV) and visible (VIS) range (200 to 1099 nm), the AvaLight-DH-CAL is the best solution. This source can be used with all AvaSpec spectrometers to calibrate for absolute spectral intensity. It is supplied with a built-in diffuser, a cosine corrector (CC-VIS/NIR) with SMA adapter and a CD-ROM containing the calibration files in ASCII format. Two calibration files are included: one for irradiance calibration over the full range (200 to 1099 nm) and one over the visible and near infrared range (350 to 1099 nm). For the first file, both the deuterium and the halogen bulb should be used during calibration. The second file is to be used with only the halogen light. The halogen-only spectrum provides a smoother black-body calibration spectrum for the longer wavelengths. The calibration files can be imported in the AvaSoft-IRRAD application software for intensity calibration, which turns your spectrometer into a spectroradiometer. For a more balanced spectrum across the 200 to 1100 nm range, Avantes offers the AvaLight-DH-BAL-CAL light source. For ultraviolet range calibration only (200 to 400 nm), the AvaLight-D-CAL is the right choice. The AvaLight-DH-CAL-ISPxx is a special version of these calibrated light sources, meant to facilitate coupling of the AvaSphere-xx-IRRAD integrating spheres (xx is 30, 50 or 80) to the light source. The AvaLight-DH-CAL, AvaLight-DH-BAL-CAL and AvaLight-D-BAL-CAL all include a power supply. Key Features: Flexible Calibration Ultraviolet (UV) and Visible (VIS) Range Built-in Diffuser and Cosine Corrector Calibration Use: Irradiance µW cm-2 nm-1 Calibrated Surface: CC-UV/VIS or AvaSphere Wavelength Range: 200 to 1099 nm Calibration Repeatability: ±1.0% Calibration Relative Uncertainty to NIST Standard: ±10% (200 to 240 nm), ±9% (240 to 350 nm), ±10% (350 to 400 nm), ±9.5% (400 to 1100 nm) Calibration Valid for 60 h Warm-up Time: ca. 30 min Bulb Output: 80 µW cm-2 nm-1 (@215 nm), 5 µW cm-2 nm-1 (@800 nm) Power Supply: 100 to 240 VAC Dimensions: 315 x 165 x 140 mm Applications: Calibration of Spectrometers in UV or VIS Wavelength Range; Measuring Absolute Spectral Intensity

Balanced Power; 200-2500 nm; Drift <±0.1, <±0.5%/h; Optical Power 6-448 µW; Halogen Lamp Colour Temperature 3,000 K; Power Supply 100-240 VAC, 50/60 Hz Avantes’ AvaLight-DH-S is a powerful light source, but, like any unbalanced deuterium-halogen source, it does have a very dominant alpha peak at 656 nm. This is why Avantes developed the DH-S-BAL, in which this peak is drastically reduced by a dichroic filter. This means less power, but an increase in the dynamic range of a factor 20. The light source delivers a continuous spectrum with high efficiency. The highest stability is in the ultraviolet (UV), visible (VIS) and near-infrared (NIR) range, from 200 to 2500 nm. An integrated TTL-shutter and filter holder for filters of up to 50 x 50 x 5.0 mm are included. The filter holder can be easily replaced by a direct-attach cuvette holder CUV-DA-DHS, useful for fluorescence or absorbance measurements. The TTL-shutter can be controlled from any AvaSpec spectrometer, which means the auto-save-dark option in AvaSoft software can be used. Connection to the fiber is done through an SMA-905 connector, which features an adjustable focusing lens assembly. This ensures you have the maximum possible power into your fiber. For all deuterium light sources, solarization resistant fibers (-SR) are recommended. The output of the AvaLight-DH-S-BAL is optimized for fibers or bundles up to 1500 µm. Key Features: Balanced Power Light Source Combined Deuterium-Halogen Light Source Wide Wavelength Spectrum in the UV-VIS-NIR Range: 200 to 2500 nm Integrated TTL Shutter High Efficiency Increased Dynamic Range Warm-up Time: 20, 30 min Lamp Power: 5, 78 W Maximum Drift: ±0.1, ±0.5%/h Noise (AU): 2x10-5, 10-4 Colour Temperature (Halogen Lamp): 3,000 K Optical Power: 6, 17 µW (200 µm Fiber), 33, 160 µW (600 µm Fiber), 90, 448 µW (1000 µm Fiber) Lamp Lifetime: 1000, 2000 h Power Supply: 100 to 240 VAC, 50/60 Hz Dimensions: 315 x 165 x 140 mm Applications: Spectroscopy and Measurements With Balanced Optical Power in the UV/VIS/NIR Range

Deuterium-Halogen; 200-2500 nm; Stability <1 mAU; Drift <0.25%/h; Optical Power 0.2, 7 µW; Power Supply 12 VDC, 450 mA Get the best of two worlds with Avantes’ AvaLight-DHc full range light source. It has both a deuterium light source and a halogen light source, providing you with adequate light between 200 and 2500 nm for nearly all absorbance chemistry applications. Deuterium emits light between 200 and 550 nm, whereas halogen emits light of up to 2500 nm. Coupling to the rest of your spectroscopy system is easy with the SMA connector. This light source is recommended in settings with large fiber cables or direct-attachment to a cuvette holder such as the CUV-DA, due to its relatively low output energy. The integrated TTL-shutter makes saving a dark measurement very simple in combination with AvaSoft (extra IC-DB26-2 needed). Optionally, the AvaLight-DHc is available in a rack-mountable version, to be used in the 19” rack or the 9.5” desktop system. A direct-attach cuvette holder CUV-DA is available for fluorescence or absorbance measurements. Key Features: Combined Deuterium-Halogen Light Source Integrated TTL-Shutter Wavelength Range: 200 to 2500 nm Stability: <1 mAU Warm-up Time: 1, 8 min Drift: <0.25%/h Optical Power (in 600 µm Fiber): 0.2, 7 µW Lamp Lifetime: 1000, 2000 h Temperature Range: 5 to 35 °C Power Supply: 12 VDC, 450 mA Dimensions: 175 x 110 x 44 mm Applications: Nearly All Absorbance Chemistry Applications