AR Series Water-Cooled Oil-Filled Film Capacitors

Product number: SW10338

Manufacturer: HIGH ENERGY CORPORATION

Downloads

AR Series Water-Cooled Oil-Filled Caps High Energy Corporation Datasheet

Product information "AR Series Water-Cooled Oil-Filled Film Capacitors"

6.0 µF to 1400 µF; 750 kv to 1250 kv; 300 kVA to 1600 kVA

High capacitance at high power
6 to 1,400 µF capacitance
800 to 1,250 V_RMS
240 to 2,000 A_RMS
300 to 2,000 kVA
Up to 25 kHz

These oil-filled, water-cooled capacitors are aimed at particularly demanding applications such as high-voltage systems, pulsed lasers or induction heating. Select the right component from our portfolio of oil-filled capacitors. We offer a wide range of standard packing components and internal structures that make the capacitors suitable for energy storage, DC filtering, transient snubbing and high alternating current applications. The standard types offered here do not provide the solution to your challenge? We design, manufacture and test customized oil-filled capacitors according to your specifications - please contact us!

Manufacturer "HIGH ENERGY CORPORATION"

Similar products

CC Series Oil-Filled Film Capacitors

1 µF to 20 µF; 2,000 kv to 10,000 kv DC Filter Capacitors 1 to 20 µF capacitance Voltage 2,000 to 10,000 VDC Plated drawn steel cans Our oil-filled capacitors are aimed at particularly demanding applications such as high-voltage systems, pulsed lasers or induction heating. Select the right component from our portfolio of oil-filled capacitors. We offer a wide range of standard packing components and internal structures that make the capacitors suitable for energy storage, DC filtering, transient snubbing and high alternating current applications. The standard types offered here do not provide the solution to your challenge? We design, manufacture and test customized oil-filled capacitors according to your specifications - please contact us! Specifications Capacitance Range 1 to 20 µF Capacitance Tolerance ± 10 % standard, other tolerances available Operating Temperature -40 °C to +90 °C Insulation Resistance 25,000 MΩ•µF at 25 °C typical AC Ripple Voltage The sum of the DC voltage and peak AC ripple should not exceed the capacitor’s VDC rating. Additionally, the AC component should not exceed: 20 % of VDC at 60 Hz; 10 % of VDC at 400Hz; 5 % of VDC at 1 kHz; 1 % of VDC at 10 kHz Can Construction Drawn plated steel, epoxy paint optional Dielectric Kraft paper and polypropylene with environmentally compatible impregnant

Product number: SW10336

Manufacturer:

CHD Series Metallized Film Capacitors

0.01 µF to 0.33 µF ; VMAX 700 kV; SMAX 150 kVA 700 VRMS Working Voltage 150 kVA Max Power 250 ARMS Max Current Conduction Cooled Series & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.1 to 0.2 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 68 x 33 x 22.5 mm, 2 11/16 x 1 5/32 x 7/8 inch Weight 0.2 kg; .44 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10320

Manufacturer:

CHE Series Metallized Film Capacitors

0.2 µF to 2.0 µF ; 525 kV to 700 kv; 325 kVA to 400 kVA Up to 700 VRMS Working Voltage Up to 400 kVA Max Power Up to 800 ARMS Max Current Conduction Cooled Series & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.2 to 2.0 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 70 x 57 x 41 mm, 2 3/4 x 2 1/4 x 2 5/8 inch Weight 0.5 kg; 1.1 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10321

Manufacturer:

CHG Series Metallized Film Capacitors

0.1 µF to 1.32 µF ; 500 kV to 1000 kv; SMAX 300 kVA Up to 700 VRMS Working Voltage 600 kVA Max Power Up to 525 ARMS Max Current Conduction Cooled Series & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.18 to 1.2 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 49 x 49 x 30 mm, 1 15/16 x 1 15/16 x 1 3/16 inch Weight 0.25 kg; 0.5 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10322

Manufacturer:

CHH Series Metallized Film Capacitors

0.1 µF to 2.5 µF ; 400 kV to 700 kv; SMAX 160 kVA Up to 700 VRMS Working Voltage160 kVA Max PowerUp to 625 ARMS Max CurrentConduction CooledSeries & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.1 to 2.5 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 68 x 30.2 x 30.2 mm, 2 11/16 x 1 3/16 x 1 3/16 inch Weight 0.5 kg; 1.1 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10323

Manufacturer:

CHJ Series Metallized Film Capacitors

0.18 µF to 5.0 µF ; 300 kV to 700 kv; 180 kVS to 210 kVA Up to 700 VRMS Working Voltage Up to 210 kVA Max Power Up to 600 ARMS Max Current Conduction Cooled Series & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile. Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.18 to 5.0 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 76.2 x 50.8 x 36.5 mm, 3 x 2 x 1 7/16 inch Weight 0.27 kg; 0.6 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10324

Manufacturer:

CHL Series Metallized Film Capacitors

0.1 µF to 2.5 µF ; 400 kV to 700 kv; SMAX 160 kVA Up to 700 VRMS Working Voltage 160 kVA Max Power Up to 400 ARMS Max Current Conduction Cooled Series & Parallel Stackable This series of metallized film capacitors basically consists of a wound core soldered between copper terminals. This wound core is composed of two metallic electrodes separated by an insulating dielectric, a thin film of polypropylene. Among the many possible types of core windings in our wide range of metallized film capacitors, the engineers select the type that optimizes the component for a particular mission profile.Due to the materials selected and the special design, these high power capacitors are very robust and reliable (self-healing). The metallized film capacitors offer high capacitance in a small package and allow for parallel or serial stacking. They are conduction cooled, can pass high reactive currents without failure withstand very significant voltage potentials without damage. Specifications Capacitance Range 0.1 to 2.5 µF standard; 0.01 to 0.33 custom Capacitance Tolerance ± 10 % standard, other tolerances available Dimensions 68 x 32 x 30.2 mm, 2 11/16 x 1 1/4 x 1 3/16 inch Weight 0.5 kg; 1.1 lb Operating Temperature Up to +90 °C Cooling method Conduction-cooled by bus bars Dissipation Factor 0.1 % Maximum Stray Inductance less than 5 nH

Product number: SW10325

Manufacturer: