380-24-AA TEC based Cabinet Cooler 210W Cooling Capacity

Fused Silica; 450-1700 nm; Finesse 0.6, 6, >30; FSR 20-4023 GHz, 0.5-2/cm; Thickness 0.025-6.743 mm; Uncoated or Coated; 2x4, 5x5, Dia. 25.4 mm; Clear Aperture Dia. 20 mm LightMachinery’s broad range of solid Fused Silica (SiO2) etalons is manufactured using the company’s patented fluid jet polishing (FJP) technology – allowing the adjustment of the etalon’s shape and flatness to within a few nanometers. LightMachinery’s Fused Silica etalons are available uncoated in rectangular shapes with dimensions of 2 x 4 or 5 x 5 mm or with dielectric coatings in circular shapes and 25.4 mm diameter. Uncoated 2 x 4 mm solid Fused Silica etalons are very small devices that our customers usually cement on one end to a holder. The small size is preferred for use inside small laser cavities. A dedicated 12.7 mm diameter aluminium mount designed to hold 2 x 4 mm etalons is available – its price includes cementing of the etalon to the mount at the supplier. Uncoated 5 x 5mm solid Fused Silica etalons are slightly larger versions that are easier to manipulate with human hands. Again, a dedicated 25.4 mm diameter mount designed to hold 5 x 5 mm etalons is available – its price including cementing of the etalon to the mount at the supplier. While uncoated, rectangular types feature a finesse of 0.6, circular 25.4 mm (1”) diameter solid Fused Silica etalons with dielectric coatings for higher finesse are available for five different wavelength ranges (450 to 650, 530 to 660, 700 to 850, 850 to 1100, 1450 to 1700 nm) and with finesse values of 6 or >30. Etalons are optically transparent, flat components with very precisely parallel reflecting surfaces. For high performance (i.e. resolution), these components require very high-quality, flat and level surfaces with low roughness and extreme parallelism. Solid Fused Silica etalons are comparatively simple, robust, yet very parallel optical components with a wide variety of applications in spectroscopy and lasers. Although solid etalons are generally coated to increase the finesse of the etalon, uncoated solid etalons – using only the 4% fresnel reflection to provide the etalon effect – are often used inside laser cavities since only low finesse is required to filter out unwanted laser wavelengths, and uncoated etalons are very damage resistant. One major issue with solid etalons is their instability to temperature changes (both the index and the physical thickness of the etalon material change with temperature), which can be unacceptable in certain applications. In those cases, please refer to air spaced etalons that reduce this problem of temperature dependence by using air as the etalon medium. In certain applications though, the temperature dependence can also be a useful method for tuning the transmission peak position since it effectively changes the thickness of the etalon. Sometimes you need something special – if you are looking for a customized solid Fused Silica etalon that exactly meets your specific requirements, please get in touch with the AMS Technologies etalon experts. Our supplier LightMachinery is extremely experienced with specifying, designing and manufacturing custom etalons using the company’s patented fluid jet polishing (FJP) technology. We are looking forward to discussing your customized etalon solution! Fluid jet polishing (FJP) systems use a fine stream of slurry to accurately remove nanometers of material from an optical surface. Many years of refining this computer controlled polishing technology have enabled LightMachinery to use FJP for the adjustment of the shape and flatness of optical components such as etalon mirrors to within a few nanometers as well as the production of very thin components such as wafers and thin etalons that are impossible to accurately polish using conventional technology. Key Features: Etalon Material: Fused Silica Wavelength Range: 450 to 1700 nm Finesse: 0.6, 6, >30 Free Spectral Range, FSR: 20 to 4023 GHz, 0.5/cm to 2/cm Coating: Uncoated or Dielectric Coating Rectangular Types: 2 x 4, 5 x 5 mm Dedicated 12.7 or 25.4 mm Diameter Aluminium Mounts Available for Rectangular Types – Price Includes Cementing of the Etalon to the Mount at the Supplier Circular Types: Diameter 25.4 mm (1”) Clear Aperture: 85% of Outside Dimension (Diameter 20 mm for Circular Types) Matched Surface Figure: λ/100 Surface Quality: 10/5 or Better Wedge: 0.1 arcsec Typical Applications: Spectroscopy; Lasers; Interferometers; Wavelength Measurement; Fine-structural Investigation of Spectral Lines

Cabinet Cooler - 46W Cooling Capacity - TEC based – 60-12-AA

Motor, pump, 1/2 hp, 115/230 VAC, 1 ph, 50/60 Hz, 4.3 gpm. The 230-0203 replacement motor fits to following chillers and cooling systems: Lytron Kodiak chillers: RC011, RC022, RC030, RC045 Lytron Modular Cooling System: MCS50

Cabinet Cooler - 60W Cooling Capacity - TEC based – 120-12-AA

Plastic; Filter Type: 0337; 10% VLT; 530-607 nm; Purple Made of special plastic, the laser safety eyewear ONTOR is the perfect solution to wear over prescription glasses. The black/grey ONTOR frame offers a large field of vision as well as lateral impact protection. The temples of the laser safety goggles can be adjusted in length and inclination. A removable soft and rubberized face foam improves the wearing comfort. The model 000-K0337-ONTO-52 features the laser safety filter #0337 by PROTECT-Laserschutz, making it suitable in particular for dye lasers. The filter 0337 covers additional wavelengths as well. The laser safety filter consists of a pink polycarbonate and offers a visual light transmission (VLT) of more than 10 % and a minor filter thickness. The laser safety filter is CE certified in accordance with the requirements of EN 207. Key Features: Frame Colour Black/Grey Filter Thickness approx. 2.0 mm Optical Class 1 Areas of Refractive Power: 0 dpt   Protection Levels: Wavelength (nm) Certified protection levels according to EN 207  530 – 535  DIR LB2 (OD 2+) >535 – 565 DIR LB3 (OD 3+) >565 – 569 DIR LB4 (OD 4+) >569 – 572  D LB4 + IR LB5 (OD 5+) >572 – 580 D LB4 + IR LB6 (OD 6+) >580 – 600 D LB4 + IR LB7 (OD 7+) >600 – 607 DIR LB3 (OD 3+)   PF CE Please note the wavelengths of your laser system and the corresponding protection levels. Calculate the required protection levels for the wavelengths carefully and compare them with the information in the protection level description above. This is the only way to ensure that the glasses can be used without risk.   Scope of Delivery: 1 Laser Safety Eyewear with black/grey ONTOR Frame Case Microfiber Cloth Instruction for Use Spectacle Cord