AMS Technologies

Aluminum fins; Copper tubes; 1 fan; 147.1x159x50.8 mm; 10-pass; 150psi/10bar max; 7.6 lpm max Water-to-air heat exchanger main dimensions HX housing: 147,1 mm x 159 mm x 50,8 mm Tubes and tube connections: Copper, OD 3/8" Connection tube length 55,8 mm Fins: Aluminum, thickness 0,15 mm HX housing and end plates: stainless steel, 1 mm without fan plate Specified for fluid pressures of at least 150psi/10bar max. 7,6 l/min water flow  

Fan Distance Frame with holes, Material: POM, black, dim. 92x92x25mm.

150x88.9x12.7 mm; Aluminum; Copper Tubes; 2 -PassLCP ET 88,9x12,7x150/2Pass_Cu is an aluminum cold plate combined with 2-pass copper tubes. The exclusive section shape, pressed in the base plates without glues or resins, maximizes adhesion and minimizes any thermal impedance between the tube coil and the plate, both on the straight and curved parts of the design.We can design embedded tube cold plates to be fully customized for the individual needs of each specific design, regardless of the application for which the plate is designed. Get in touch with our thermal experts to discuss your specific requirements.

150x88.9x12.7 mm; Aluminum; Copper Tubes; 4 -PassLCP ET 88,9x12,7x150/4Pass_Cu is an aluminum cold plate combined with 4-pass copper tubes. The exclusive section shape, pressed in the base plates without glues or resins, maximizes adhesion and minimizes any thermal impedance between the tube coil and the plate, both on the straight and curved parts of the design.We can design embedded tube cold plates to be fully customized for the individual needs of each specific design, regardless of the application for which the plate is designed. Get in touch with our thermal experts to discuss your specific requirements.

300x88.9x12.7 mm; Aluminum; Copper Tubes; 2 -PassLCP ET 88,9x12,7x300/2Pass_Cu is an aluminum cold plate combined with 2-pass copper tubes. The exclusive section shape, pressed in the base plates without glues or resins, maximizes adhesion and minimizes any thermal impedance between the tube coil and the plate, both on the straight and curved parts of the design.We can design embedded tube cold plates to be fully customized for the individual needs of each specific design, regardless of the application for which the plate is designed. Get in touch with our thermal experts to discuss your specific requirements.

300x88.9x12.7 mm; Aluminum; Copper Tubes; 4 -PassLCP ET 88,9x12,7x300/4Pass_Cu is an aluminum cold plate combined with 4-pass copper tubes. The exclusive section shape, pressed in the base plates without glues or resins, maximizes adhesion and minimizes any thermal impedance between the tube coil and the plate, both on the straight and curved parts of the design.We can design embedded tube cold plates to be fully customized for the individual needs of each specific design, regardless of the application for which the plate is designed. Get in touch with our thermal experts to discuss your specific requirements.

Cabinet Cooler; Compressor Based; 400 W @+26°C Cabinet, +35°C Ambient; 24 VDC; 13 A; Flush Mount; Temperature Stability ±0.05 K Key Features: Miniature Compressor-based Air Cooler for Cabinet Cooling Tasks up to 400 W Compact Dimensions and Low Weight Compared to Peltier-based & Other Compressor-based Coolers Easy to be Attached to Customer Cabinet IP65 Environmental Protection (Ambient Side) – For Operation in Harsh Environments 24 VDC Power Supply – Independent of Mains AC Voltage or Frequency Integrated Temperature Controller Speed-controlled Compressor – no Hysteresis, Stabilized Temperature to ±0.05 K PWM Speed-controlled Fan for Noise Reduction IoT Ready: Remote Operation, Monitoring and Service over Integrated Ethernet Interface AMS Technologies’ mAC-C-400-24 compact and rugged, compressor-based mini air cooler provides cabinet cooling capacities up to 400 W. In comparison to Peltier-based cabinet coolers, the highly efficient mAC-C-400-24 features significantly lower size and weight due to its miniature compressor and customized condenser/evaporator. A powerful fan moves the cabinet internal air at 130 m³/h. The internal air's temperature is maintained at the set value within ±0.05 K by an integrated circuit controlling the rotary compressor’s speed. The external fan is PWM speed controlled for noise reduction. Global Use: Its 24 VDC supply voltage allows the mAC-C-400-24 to operate from the cabinet’s 24 VDC voltage rail, with no need to care for the local mains voltage or frequency. IoT Ready: Access the mini air cooler’s system parameters from any location via the integrated Ethernet interface, also allowing remote control, service and even firmware update. Your customized air cooler: The mAC-C-400-24 cannot cover your requirements? AMS Technologies’ thermal management specialists are happy to develop a solution tailored to your needs – based on compressor or Peltier technology – and offer all services from development and proof-of concept to series production. Get in touch with us now to discuss your customized air cooler. Specifications: Cooling Capacity: 400 W @+26°C Tchilled cabinet air +35°C Tambient Temperature Stability: ±0.05 K External Working Temperature Range: +10°C to +50°C Internal Working Temperature Range: +15°C to +35°C Operating Voltage: 24 VDC Max. Operating Current: 13 A Max. Power Consumption: 310 W Refrigerant: R134a, 130 g (0.19 tequCO2) Dimensions: 310 x 157 x 475 mm Weight: 15 kg Orientation: Flush Mount, Side Wall or Door Environmental Protection Level, Enclosure Side: IP2X Environmental Protection Level, Ambient Side: IP65 Approvals: CE Applications: Cabinet Cooling; Cooling of Air inside Cabinets for Applications With up to 400 W Power Dissipation; Harsh Environments

Compressor-based and Peltier-based Cabinet Coolers; Cooling Capacity 400, 460 W; Power Supply 24 VDC, 13, 43 A; Orientation Flush Mount, Any; External Temperature Range +10-+50°C, -40-+70°C; Protection Level Ambient Side IP65 AMS Technologies provides miniature air cooling kits that allow customers to evaluate cabinet cooling solutions with up to 460 W cooling capacity, as well as a miniature, compressor-based air cooler with 400 W cooling capacity. Our mAC-C-400-24 mini Air Cooler is a compact, compressor-based cabinet cooler for cooling capacities up to 400 W that takes over where Peltier isn’t powerful enough. Its integrated controller drives the speed of the miniature rotary compressor to maintain the set temperature to within ±0.05 K. A powerful fan moves the cabinet internal air at 130 m³/h. The external fan is PWM speed controlled for noise reduction. Miniature rotary compressors as well as customized condensers and evaporators significantly reduce size and weight compared to Peltier-based cabinet coolers, while providing a highly efficient vapor compression circuit. The mAC-C-400-24 can be operated on the cabinet’s 24 VDC voltage rail, independent of mains voltage or frequency. And the mAC-C-400-24 is “IoT ready” – an integrated Ethernet interface allows remote access to system parameters as well as remote control of the cooling system via web browser. Our mAC-T-460-24-KIT mini Air Cooling Kit, a powerful thermoelectric cabinet cooler development kit, is the optimal solution for harsh environments where compressor-based coolers cannot withstand high temperatures, shock and vibration or operation on moving or turning equipment. The Peltier modules can be operated up to 36 VDC when necessary. At nominal 24 VDC and +35°C/+35°C (ambient/internal), the unit reaches a cooling capacity of 460 W and a coefficient of performance (COP) of 0,55. Your customized mAC-KIT: For customer requirements that cannot be covered by the mAC-C-400-24 or the mAC-T-460-24-KIT, our thermal management specialists at AMS Technologies are happy to develop a completely tailor-made solution and offer all services from development and proof-of concept all the way to series production. Get in touch with us now to discuss your customized mAC-KIT. Key Features: Up to 460 W Cooling Capacity (Tchilled cabinet air +35°C, Tambient +35°C, 55% r. h.) Compressor-based: Very Compact & Lightweight Format, ±0.5 K Temperature Stability Peltier-based: No Moving Parts Except for Fans, Independent From Orientation Wide Ambient Temperature Range: +10°C to +50°C (Compressor-based); -40°C to +70°C (Peltier-based) Orientation: Flush Mount, Side Wall or Door (Compressor-based), Any (Peltier-based) Ambient Side Environmental Protection: IP65, Suitable for Harsh Environments Operating Voltage: 24 VDC – Independent of Mains AC Voltage or Frequency Max. Operating Current: 13 A (Compressor-based), 43 A (Peltier-based) IoT Enabled (Compressor-based) Dimensions: 310 × 157 × 475 mm (Compressor-based), 345 × 339 × 155 mm (Peltier-based, +132 mm drop in cabinet) Weight: 15 kg(Compressor-based), 21 kg (Peltier-based) Applications: Cabinet Cooling; Cooling of Air inside Cabinets for Applications With up to 460 W Power Dissipation; Harsh Environments

Max. Output Current TEC 20 A; Chassis Mount; Supply Voltage 12-55 VDC; Temperature Stability <0.1°C; H-Bridge Control; Temperature Regulation PID or ON/OFF AMS Technologies‘ mCTRL-T-20-12/55 mini TEC controller uses an electrical H-bridge to drive thermoelectric coolers (TECs) / Peltier elements with broadly variable voltages und currents of up to 10 A, or up to 20 A using a heat sink. An auxiliary temperature sensor (RTD such as Pt100, Pt1000, or thermistor) can be connected to allow highly accurate temperature control within less than ±0.1°C. The user can select a set temperature between -100°C and +100°C via analog interfaces such as 0-5 V or 4-20 mA, or digital interfaces like RS232 (serial) or WiFi. The layout of the board allows to separate the graphic OLED display, including the device’s three control buttons, enabling OEMs to separate this display/control unit from the main board and connect it to the main board via ribbon cable. Key Features: H-bridge Control Programmable via PC or Keyboard Input Voltage: 12 VDC to 55 VDC Output Voltage 0 VDC to 55 VDC Load Current: 0 A to 10 A, (20A using a heatsink) Current Limit Adjustable Output Power Resolution: 0.1% Power Dissipation: <10 W 0-5 V/4-20 mA Optional Setpoint Input Temperature Precision/Stability: Better Than 0.1°C Temperature Regulation Algorithm: PID or ON/OFF Temperature Resolution: 0.1°C PWM Base Frequency: 10 kHz Process Control Rate: 50 Hz Configurable Alarm Output Auxiliary TEC Heatsink NTC Temperature Sensor Input Selectable Temperature Sensors: RTDs Like Pt100, Pt1000, Thermistors Communication Interfaces: RS232, WiFi Set Temperature Range: -100°C to +100°C Graphic OLED Display Detachable Display Board Ambient Temperature Range: -20°C to +70°C RoHS Compliant Dimensions: 157 × 66 × 25 mm Applications: Controlling Thermoelectric Coolers (TECs), Peltier Elements, Driving TECs With Currents up to 20 A

Compressor Refrigerant Circuit and TEC Cascaded; Cooling Capacity 4W @-50°C; Ultra Wide Temperature Range -50-+150°C Key Features: Cascading of Compressor Refrigerant Circuit and Peltier Element Refrigerant Directly Cooling the Peltier Element’s Hot Side Ultra Wide Temperature Range -50°C to +150°C in a Compact System Very precise temperature control Stable Operation @-50°C With 4 W Cooling Capacity No Need for Coolant (Water) Loop No Corrosion/Erosion Low Vibration, Low Noise AMS Technologies’ mDC-CT-4-KIT direct cooling system cascades a thermoelectric (Peltier) element and a compressor-based refrigerant circuit. Based on the "direct evaporation" technology, the compressed refrigerant evaporates directly on the hot side of the thermoelectric (Peltier) module and thus dissipates the heat very effectively and with high heat flux. The Compressor/ Peltier cascade significantly expands the temperature range of the capabilities of the individual technologies, enabling a very wide operating temperature range from -50°C to +150°C in a compact device. Utilizing suitable insulation, constant operation at -50°C is possible, while still providing about 4 W cooling power at this extreme temperature point. The mDC-CT-4-KIT mini compressor/thermoelectric plate-to-air cooling kit does not require a water circuit, is very quiet, low-vibration and maintenance-free. Possible applications are in the fields of analytics, molecular reactors, rheology, or viscosity measurement – or wherever very low temperatures have to be maintained with moderate heat loads. Direct evaporation technology is also very suitable for cooling and temperature stabilization of laser diodes or laser diode stacks at temperatures of around +25°C – an application area covered by AMS Technologies’ mDC-T-130-24-KIT thermoelectric plate-to-air cooling kit. For customer requirements that cannot be covered by our mDC-T-130-24-KIT or mDC-CT-4-KIT, AMS Technologies’ thermal management specialists are happy to develop a direct cooling solution tailored to your needs – based on Peltier or compressor technology, or both – and offer all services from development and proof-of concept to series production. Get in touch with us now to discuss your customized direct cooler. Specifications: Set Temperature Range: -50°C to +150°C Cooling Capacity at Tambient 25°C and Tplate 25°C: 40 W Cooling Capacity at Tambient 25°C and Tplate -50°C: 4 W Applications: Analytics; Molecular Reactors; Rheology; Viscosity Measurement; Wherever Very Low Temperatures Have to be Maintained With Moderate Heat Loads

Peltier Cooling Assembly Kit; Cooling Capacity 130 W @+25°C; with Detachable Carrier Plate; Power Supply 24 VDC Key Features: Ideal for Precise Cooling of Medical and Industrial Lasers Efficient Peltier System, no Liquids, no Moving Parts (Except Fans) Allows for Excellent Temperature Stability Low Vibration, Low Noise Lightweight, Very Compact Easy to Integrate The compact mDC-T-130-24-KIT thermoelectric plate-to-air cooling kit was developed for precise temperature control of laser diode modules and direct heat transfer to the ambient air. The highly efficient, solid state mini direct cooling system reaches a cooling capacity of 130 W for 24 VDC supply voltage and +25°C on laser mounting plate and +25 °C ambient temperature. The mDC-T-130-24-KIT Peltier cooling assembly kit comes with a 108 mm x 108 mm mounting plate that can be removed without the need to dismantle the Peltier assembly and can be worked on, i.e. individual mounting patterns can be drilled by the customer. The kit comes with graphite foil and screws pre-mounted. The Peltier modules can be configured for either 12 or 24 VDC. Depending on cooling requirements, the 60 x 60 mm fans' speed can be reduced for quiet operation. We also carry a large range of suitable temperature controllers that can be found here. If your application requires higher cooling capacities, take a look at our mRC-C-450-100/240 mini Recirculating Chiller and our liquid cooling solutions offerings – or browse our large portfolio of liquid to air temperature management assemblies. Your customized direct cooler: AMS Technologies’ thermal management specialists are happy to develop a direct cooling solution tailored to your needs – based on Peltier or compressor technology – and offer all services from development and proof-of concept to series production. Get in touch with us now to discuss your customized direct cooler.  Specifications: Nominal Cooling Capacity: 130 W (@+25°C Ambient, +25°C Mounting Plate (Bottom)) Power Consumption per Fan (Manufacturer’s Data): 6 W Max. Noise (Manufacturer’s Data): 49 dB(A) Coefficient of Performance (COP): 0.57  Applications: Direct Cooling and Precise Temperature Control of Laser Diode Modules With Power Dissipation of up to 130 W  

mini Liquid Cooling Evaluation Kit; Cooling Capacity 1200 W @+25°C; Power Supply 24 VDC Key Features: Up to 1200 W Cooling Capacity Ideal for Compact Cooling of Lasers or Bio Reagents Compressor Speed Control for Ease of Temperature Control Low Vibration, Low Noise Lightweight, Compact Easy to Integrate Kit to Interface With OEM Water Circuit and Electronics Control Components Carefully Designed to Match Each Other The mLC-C-1200-24-KIT is a sealed vapor compression circuit with a speed controlled miniature rotary BLDC compressor. The evaporator is a brazed plate heat exchanger, the interface to the customer liquid coolant circuit. The mLC-C-1200-24-KIT comes with the separate 24 VDC inverter board. The compressor speed can be set from the upper control system by frequency or analog signal. The mLC-C-1200-24-KIT’s condenser is an aluminum finned copper tube heat exchanger coil and must be cooled by forced convection, i.e. a 200 mm diameter fan or equivalent. The heat exchanger stainless steel plates are nickel brazed suitable for a variety of coolant fluids, such as water, DI water and glycol-water mixtures. The plate heat exchanger has male R ¼” connectors for the customer to connect its water circuit.For lower heat loads, we also carry a mLC-C-450-24-KIT with up to 450 W cooling capacity, or a Peltier-based mini Direct Cooling KIT providing up to 130 W with no liquids or moving parts (except fans). If you are looking for a ready-to-use recirculating chiller that includes the coolant loop, have a look at our family of mini Recirculating Chiller Kits (mRC-KITs) as well as our our other liquid cooling solutions offerings – or browse our large portfolio of liquid to air temperature management assemblies . Your customized liquid cooler: AMS Technologies’ thermal management specialists are happy to develop a liquid cooling solution tailored to your needs – based on Peltier or compressor technology – and offer all services from development and proof-of concept to series production. Get in touch with us now to discuss your customized liquid cooler.Specifications: Cooling Capacity: Approximately 930 W (at 59 rps, Twater = +20°C, Tambient = +40°C) to 1760 W (at 90 rps, Twater = +20°C, Tambient = +20°C) Power Supply Consumption: ≤720 W (30 A @24 VDC) Temperature Range (Ambient, Operating): +15°C to +45°C Hydraulic parameters:    Pressure Drop 40 mbar @6 lpm, 100 mbar @9 lpm Controller/Inverter Board: Operating Range 28 to 100 rps, Speed Command Square Wave Pulse Frequency 56 to 200 Hz, Variable Resistor Input 2.8 to 10 kΩ Dimensions: 250 x 386 x 248 mm (WxHxD) Weight: 10 kg Applications: Compact Cooling of Lasers or Bio Reagents With up to 1200 W Cooling Capacity; Evaluation Kit to Interface With OEM Water Circuit and Electronics Control  

mini Liquid Cooling Evaluation Kit; Cooling Capacity 450 W @+25°C; Power Supply 24 VDC Key Features: Up to 450 W Cooling Capacity Ideal for Compact Cooling of Lasers or Bio Reagents Ideal for Mobile Cooling Applications Compressor Speed Control for Ease of Temperature Control Low Vibration, Low Noise Lightweight, Compact Easy to Integrate Kit to Interface With OEM Water Circuit and Electronics Control Components Carefully Designed to Match Each Other The mLC-C-450-24-KIT is a sealed vapor compression circuit with a speed controlled miniature rotary BLDC compressor. The evaporator is a brazed plate heat exchanger, the interface to the customer liquid coolant circuit.  The mLC-C-450-24-KIT comes with the separate 24 VDC inverter board. The compressor speed can be set from the upper control system by frequency or analog signal. The condenser is an aluminum finned copper tube heat exchanger coil and must be cooled by forced convection, i.e. a 120x120 mm fan or equivalent. The heat exchanger stainless steel plates are nickel brazed suitable for a variety of coolant fluids, such as water, DI water and glycol-water mixtures. The plate heat exchanger has male R ¼” connectors for the customer to connect its water circuit. The mLC-C-450-24-KIT’s condenser is an aluminum finned copper tube heat exchanger coil and must be cooled by forced convection, i.e. a 120x120 mm fan or equivalent. The heat exchanger stainless steel plates are nickel brazed suitable for a variety of coolant fluids, such as water, DI water and glycol-water mixtures. The plate heat exchanger has male R ¼” connectors for the customer to connect its water circuit. If you are looking for a ready-to-use recirculating chiller based on this mLC-Kit that includes the coolant loop, have a look at our mRC-C-450-100/240 mini Recirculating Chiller as well as our other liquid cooling solutions offerings – or browse our large portfolio of liquid to air temperature management assemblies. For lower cooling capacities, we also carry a Peltier-based mini Direct Cooling KIT providing up to 130 W with no liquids or moving parts (except fans). Your customized liquid cooler: AMS Technologies’ thermal management specialists are happy to develop a liquid cooling solution tailored to your needs – based on Peltier or compressor technology – and offer all services from development and proof-of concept to series production. Get in touch with us now to discuss your customized liquid cooler. Specifications: Cooling Capacity: Approximately 450 W (at 100 rps, Twater = +25°C, Tambient = +25°C) Power Supply Consumption: < 150 W (6 A @24 VDC, 80 rps) Temperature Range (Ambient, Operating): -10°C to +45°C Hydraulic Parameters: Pressure Drop 30 kPa @4 lpm Controller/Inverter Board: Operating Range 20 to 100 rps, Speed Command Square Wave Pulse Frequency 40 to 200 Hz, Variable Resistor Input 2 kΩ to 10 kΩ Dimensions: 200 x 172 x 180 mm (WxHxD) Weight: 3.4 kg Applications: Compact Cooling of Lasers or Bio Reagents With up to 450 W Cooling Capacity; Mobile Cooling Application; Evaluation Kit to Interface With OEM Water Circuit and Electronics Control

Compact Sealed Vapor Compression Circuits; Cooling Capacity 450, 1200 W @+25°C; Power Supply 24 VDC, 6-30 A; Temperature Range -10-+45°C, +15-+45°C; Pressure Drop 40-300 mbar @9-4 lpm AMS Technologies’ mLC-KITs are liquid cooling development platforms featuring sealed vapor compression circuits with speed-controlled miniature rotary BLDC compressors. Brazed plate heat exchangers serve as evaporators and provide the interface to the customer liquid coolant circuit. Our mLC-KITs are available with two cooling capacity levels: the ultra-compact mLC-C-450-24-KIT is designed for cooling tasks up to 450 W, while the larger mLC-C-1200-24-KIT provides up to 1200 W cooling capacity. Both mLC-KITs come with inverter boards that require a 24 VDC power supply. The compressors’ speed can be set from the upper control system by frequency or analog signal. The condenser is an aluminum finned copper tube heat exchanger coil. The mLC-KITs must be cooled by forced convection, i. e. 120 × 120 mm fan. The mLC-C-1200-24-KIT 1200 is already equipped with a fan. The heat exchanger stainless steel plates are nickel brazed and suitable for a variety of coolant fluids, such as water, DI water and glycol-water mixtures. The plate heat exchanger has male R ¼"/ R " connectors to connect the water circuit on the customer’s side. Your customized mLC-KIT: For customer requirements that cannot be covered by the mLC-C-450-24-KIT or the mLC-C-1200-24-KIT, our thermal management specialists at AMS Technologies are happy to develop a completely tailor-made liquid cooling solution and offer all services from development and proof-of concept all the way to series production. Get in touch with us now to discuss your customized mLC-KIT. Key Features: Kits to Interface With OEM Water Circuit and Electronics Control Up to 1200 W Cooling Capacity Cooling Capacity mLC-C-450-24-KIT (Approx.): 450 W (@100 rps, Twater = +25°C, Tambient = +25°C) Cooling Capacity mLC-C-1200-24-KIT (Approx.): 930 W (@59 rps, Twater = +20°C, Tambient = +40°C, 2 lpm) to 1760 W (@90 rps, Twater = +20°C, Tambient = +20°C, 4 lpm) Speed Control for Ease of Temperature Control Lightweight, Compact Easy to Integrate Low-vibration, Low-noise Rotary Compressor Components Carefully Designed to Match Each Other Power Supply: 24 VDC, <6A (mLC-C-450-24-KIT, 80 rps), <30 A (mLC-C-1200-24-KIT) Temperature Range (Ambient): -10°C to +45°C (mLC-C-450-24-KIT); +15°C to +45°C (mLC-C-1200-24-KIT) Hydraulic Parameters mLC-C-450-24-IT: Pressure Drop 300 mbar @4 lpm Hydraulic Parameters mLC-C-1200-24-IT: Pressure Drop 40 mbar @6 lpm, 100 mbar @9 lpm Dimensions: 200 x 172 x 180 mm (mLC-C-450-24-KIT), 250 x 386 x 248 mm (mLC-C-1200-24-KIT) Weight: 3.4 kg (mLC-C-450-24-KIT), 10 kg (mLC-C-1200-24-KIT) Applications: Evaluation Kits for Building Water Cooling Solutions With OEM Water Circuit and Electronics Control; Compact Laser Cooling up to 450 or 1200 W; Bio Reagents Cooling; Mobile Applications (mLC-C-450-24-KIT)

Vapor Compression Chiller; 1000 W @+35°C (amb)/+25°C (water); Flow Rate 5.5 lpm @ 0.5 bar, Temperature Stability ≥±0.05 K at constant load; Power Supply 90-264 VAC Key Features: Recirculating Water Chiller Easy to be Integrated in Customer Application User-Definable PID Parameters and Fan Velocity Silent Operation with Low Vibration and Noise Ideal for Water Cooling Tasks up to 1000 W Customizable booster cooling capacity IoT Ready as an Option: Remote Operation, Monitoring and Service over Integrated Ethernet Interface Depending on the temperatures of coolant (water) and ambient, AMS Technologies’ mRC-C-1000-100/240 recirculating chiller provides approximately 1000 W (Twater = +25°C, Tambient = +35°C) in silent mode boostable to higher cooling capacities with higher fan speeds. The chiller contains a compressor-based refrigerant circuit as well as a closed, recirculating coolant (water) circuit. Due to its speed-controlled compressor, the mRC-C-1000-100/240 recirculating chiller offers low vibration and noise throughout the compressor’s BLDC speed range. The system’s features include global operability due to a universal 90 to 264 VAC power supply, as well as an optional integrated Ethernet interface allowing remote operation, monitoring and service. Further options are a gear pump providing 5 bar @5 l/min, CPC inlet and/or outlet fittings, external coolant filters or dust filters, and a hardware set for 19” rack mount (6U). For lower heat loads, we also carry a mRC-C-450-100/240 mini Recirculating Chiller with up to 450 W cooling capacity. Specifications: Cooling Capacity: nominal 1 kW (Twater = +25 °C, Tambient = +35 °C) Temperature Stability: +-0.05°C at constant load Available Pressure Head: 0.5 bar @ 5.5 lpm (standard), 5 bar @ 5 lpm (optional) Control: Local, RS232, IoT Ready, Interlock Power Supply: 90 to 264 VAC, 24 VDC Derivative for OEM integrations available on Demand Power Consumption: <750 W Options: 19” Rack Mount (6U); Ethernet / IoT Ready; Optional Pumps; CPC Inlet/Outlet Fittings; External Coolant Filters; External Dust Filters; Green Version Based on Propane (R290) as Refrigerant Dimensions: 443 x 283 x 675 mm, Main Body Without Filter Approval: CE (in process) Applications: Water Cooling of Lasers and Other Applications with up to 1000 W Heat Load

Vapor Compression Chiller; 450W @+25°C; 230VAC; 2lpm; USB/ Ethernet; Benchtop Key Features: Miniature Recirculating Water Chiller Compact Size, Easy to be Integrated in Customer Application User-Definable PID Parameters and Fan Velocity Calm Operation With Low Vibration and Noise Ideal for Water Cooling Tasks up to 450 W IoT Ready: Remote Operation, Monitoring and Service over Integrated Ethernet Interface Full chiller power in a shoebox form factor: the mRC-C-450-100/240 mini recirculating chiller provides to 450 W cooling capacity and contains a compressor-based refrigerant circuit as well as a closed, recirculating coolant (water) circuit that is pressurized – all that in a compact, 350 x 290 x 230 mm housing. This small size is enabled by utilizing a miniature rotary compressor, customized miniature evaporator and condenser. On the coolant side, pressurizing the circuit allows a very small tank, and a compact centrifugal pump also contributes to reduced space requirements. Due to the speed-controlled compressor, the mRC-C-450-100/240 chiller offers low vibration and noise throughout the compressor’s BLDC speed range. Further features are automatic fill and drain of the coolant circuit, global operability due to a universal 90 to 264 VAC power supply, and an integrated Ethernet interface allowing remote operation, monitoring and service. Specifications: Cooling Capacity: 300 W (Twater = +20°C, Tambient = +40°C) to 500 W (Twater = +20°C, Tambient = +20°C) Temperature Stability: +2/-1.5 K Over-/undershoot at 250 W Heat Load ON/OFF, Down to 0.05 K Continuous Operation Available Pressure Head: 1.5 bar @1 lpm; 0.5 bar @5.5.lpm Noise Level: 63 dBA (fan 40%, compressor 100%) Control: Local, USB/Serial, Internet (Web Browser) via Ethernet (IoT Ready) Interlock I/O Alarms: Liquid Level, Tank Pressure, Coolant Feed Temperature, Coolant Flow Rate, Condenser Pressure Power Supply: 90 to 264 VAC, 24 VDC Derivative Available on Demand Power Consumption: <300 W Dimensions: 350 x 280 x 230 mm, Main Body Without Filter Weight: 13 kg Approval: CE Applications: Water Cooling of Lasers and Other Applications; Integration of Water Cooling Capabilities in Systems with Limited Space  

Compact Vapor Compression Chillers; Cooling Capacity 450-1000 W @+25°C; Single and Twin Versions; 1 to 5.5 l/min; Temperature Stability ≥±0.05K; Interface USB/Serial, Ethernet AMS Technologies’ mRC-KITs are “mini Recirculating Chiller” development kits for creating particularly compact compressor-based water cooling systems. All mRC-KIT versions feature vapor compression circuits and closed, pressurized recirculating water circuits. On the refrigeration side, miniature rotary compressors as well as customized condensers and evaporators are utilized to reduce the size. The compressor’s BLDC motor is speed controlled by an inverter, eliminating annoying switching noise of hot gas bypass known from ON/OFF compressors. Throughout its speed range, the compressor twin pump design offers low vibration and low noise. Compact centrifugal pumps on the water circuit side also contribute to the compact size Since the water circuit is pressurized, the mRC-KITs manage with very small tanks – without the risk of cavitation in the smoothly operating centrifugal pumps. Overpressure on the cooling system also prevents the ingress of bacteria and oxygen and thus extends the maintenance intervals. While mRC-C-450-24-KIT and mRC-C-450-100/240 feature full chiller power and up to 450 W cooling capacity in a shoe box form factor, DmRC-C-900-100/240-KIT provides two independent water cooling systems in a 19-inch rackmount insert, which can provide a combined maximum cooling capacity of 900 W – either with each circuit cooling two heat loads independently of each other or with both circuits coupled in series, if only one circuit is needed. Our mRC-KITs are available either with a 24 VDC or with a 90 to 264 VAC wide-input-range power supply. The mRC-C-1000-100/240 can also be shipped as a 24V option to target OEM integration applications, that need a cooling capacity of around 1000W and where noise and vibrations are an issue. Automatic fill and drain: Using automatic air and water pump technology integrated into the unit, the cooling water in the tank and pipe system of the mRC-KITs can be easily filled and drained at the push of a button – without the need for time-consuming tilting or removing the unit or the tank from the system and avoiding annoying spills or leaks. mRC Recirculating ChillersIn addition to our mRC-KITs, AMS Technologies provides two recirculating chillers that are CE certified and available from stock. mRC-C-450-100/240 provides up to 500 W cooling capacity, while mRC-C-1000-100/240 features a more powerful compressor, capable of cooling capacities up to 1000 W. Both systems come with an integrated 90 to 264 VAC wide-input-range power supply.  IoT ready: An integrated Ethernet interface allows access to system parameters of the mRC recirculating chillers as well as remote control of the cooling systems via a web browser. Your customized mRC-KIT: For customer requirements that cannot be covered by mRC-C-450-24-KIT, mRC-C-450-100/240 or DmRC-C-900-100/240-KIT, our thermal management specialists at AMS Technologies are happy to develop a completely tailor-made solution and offer all services from development and proof-of-concept all the way to series production. Contact us now to discuss your customized mRC-KIT! Key Features: Recirculating Water Chilling Kits Ideal for Water Cooling Tasks up to 1000 W Cooling Capacity (Twater +25°C, Tambient +35°C) High Cooling Capacity in Compact Format, Easy to be Integrated in Customer Application 24 VDC and 100 to 240 VAC Derivatives Available Temperature Stability: Down to ±0.05 K Flow Rate: 0.5 bar @ 5.5 lpm (standard), 5 bar @ 5 lpm (optional) Smooth, Low-noise Operation with Low Vibration Automatic Fill & Drain PID Parameters and Fan Speed Adjustable Interfaces: USB/Serial, Ethernet (IoT Enabled) Applications: Water Cooling of Lasers and Other Applications; Integration of Water Cooling Capabilities up to 1000 W in Systems with Limited Space

Customized, Turnkey Solutions for Optical Technologies Systems; Full Service From Concept to Serial Production With its "Optical Rack" concept, AMS Technologies offers the development and production of customized optical systems and subsystems in a convenient, modular rack format. The spectrum ranges from the combination and integration of optical and fiberoptic components to the installation of lasers and beam delivery up to the creation of complex control and evaluation electronics (hardware and software) as well as extensive thermal management concepts. Concept: Review of Customer Application; Discussion of Target ParametersRight at the beginning of a project, AMS Technologies can support the concept design by reviewing the customer's application and discussing the target parameters. Schematics: Selection of Key Components; Review of Engineering Needs; Development of SOW, Quotation & OrderOur team of optics experts then creates block diagrams and other schematics, selects suitable key components and takes into account all engineering needs, even beyond system integration. BOM Creation: Development of Bill of Material; Development & Design of Customized Components & Subassemblies; Documentation and Revision Control of DesignOnce the statement of work has been finalized, we generate a Bill of Material (BOM), define and develop custom components and sub-assemblies and manage design documentation and revision control. Drawings: Physical Layout of System-level Designs; Simulation & Modeling of System-level Designs; Systems Integration; Realization of Entire Design Projects; Review With CustomerUsing modern design and CAD software, the specialists in the AMS Technologies team then produces the physical layout of the design at system level, including simulation and modelling – the whole process is strictly customer centric with a close involvement of the customer in the entire process. Turnkey Solution: Supply Chain Management for All Components; Assembly & Test of Optical Rack; Installation, Documentation & Training; Maintenance & Service OptionsOnce the final design has been approved, the optical rack is assembled and tested and, if necessary, installed in the customer's system. For series production in small to medium quantities, we take care of the supply chain management for all components, generate comprehensive documentation and offer training, maintenance and service options. We are happy to realize an optical rack that covers your specific requirements and is optimally tailored to your application. Get in touch with our optical technologies experts and discuss your customized optical rack today!

Optional Bypass for T-Three (former "Oasis 3") (10-12684-1C) and (10-12684-1CL) connected to 3/8" Brass Female NPT.

Copper Fins; Stainless Steel Tubes; 148.3x139.6x46.5 mm; 6-pass; 60 barWater-to-air heat exchangermain dimensions HX housing: 148,3 mm x 139,6 mm x 46,5 mmTubes and tube connections: stainless steel 316L, OD 3/8"Connection tube length 53 mm6 pass, return-bends weldedCorrugated copper fins; thickness 0,12 mm; 18 fpiHX housing and end plates: stainless steel 304/316LHX housing including fan mount, with M4 cage-nuts/press-nutsSpecified fluid pressure: max. 60 bar