mLC-KITs mini Liquid Cooling Kits

mini Liquid Cooling Evaluation Kit; Cooling Capacity 450 W @+25°C; Power Supply 24 VDC Key Features: Up to 450 W Cooling Capacity Ideal for Compact Cooling of Lasers or Bio Reagents Ideal for Mobile Cooling Applications Compressor Speed Control for Ease of Temperature Control Low Vibration, Low Noise Lightweight, Compact Easy to Integrate Kit to Interface With OEM Water Circuit and Electronics Control Components Carefully Designed to Match Each Other The mLC-C-450-24-KIT is a sealed vapor compression circuit with a speed controlled miniature rotary BLDC compressor. The evaporator is a brazed plate heat exchanger, the interface to the customer liquid coolant circuit.  The mLC-C-450-24-KIT comes with the separate 24 VDC inverter board. The compressor speed can be set from the upper control system by frequency or analog signal. The condenser is an aluminum finned copper tube heat exchanger coil and must be cooled by forced convection, i.e. a 120x120 mm fan or equivalent. The heat exchanger stainless steel plates are nickel brazed suitable for a variety of coolant fluids, such as water, DI water and glycol-water mixtures. The plate heat exchanger has male R ¼” connectors for the customer to connect its water circuit. The mLC-C-450-24-KIT’s condenser is an aluminum finned copper tube heat exchanger coil and must be cooled by forced convection, i.e. a 120x120 mm fan or equivalent. The heat exchanger stainless steel plates are nickel brazed suitable for a variety of coolant fluids, such as water, DI water and glycol-water mixtures. The plate heat exchanger has male R ¼” connectors for the customer to connect its water circuit. If you are looking for a ready-to-use recirculating chiller based on this mLC-Kit that includes the coolant loop, have a look at our mRC-C-450-100/240 mini Recirculating Chiller as well as our other liquid cooling solutions offerings – or browse our large portfolio of liquid to air temperature management assemblies. For lower cooling capacities, we also carry a Peltier-based mini Direct Cooling KIT providing up to 130 W with no liquids or moving parts (except fans). Your customized liquid cooler: AMS Technologies’ thermal management specialists are happy to develop a liquid cooling solution tailored to your needs – based on Peltier or compressor technology – and offer all services from development and proof-of concept to series production. Get in touch with us now to discuss your customized liquid cooler. Specifications: Cooling Capacity: Approximately 450 W (at 100 rps, Twater = +25°C, Tambient = +25°C) Power Supply Consumption: < 150 W (6 A @24 VDC, 80 rps) Temperature Range (Ambient, Operating): -10°C to +45°C Hydraulic Parameters: Pressure Drop 30 kPa @4 lpm Controller/Inverter Board: Operating Range 20 to 100 rps, Speed Command Square Wave Pulse Frequency 40 to 200 Hz, Variable Resistor Input 2 kΩ to 10 kΩ Dimensions: 200 x 172 x 180 mm (WxHxD) Weight: 3.4 kg Applications: Compact Cooling of Lasers or Bio Reagents With up to 450 W Cooling Capacity; Mobile Cooling Application; Evaluation Kit to Interface With OEM Water Circuit and Electronics Control

Fiber 8-1000 µm; Standard Length 2 or 1 m; SMA terminatorsAvantes provides a diverse selection of fiber-optic cables, available in various lengths and configurations to suit your specific needs.Fiber-Optic CablesAvantes offers a wide range of fiber-optic cables, which can be manufactured in different lengths and configurations to meet your requirements. For most applications, a 2-meter length is sufficient, making it our standard fiber length.Avantes provides SMA-905 or FC/PC connectors, which can be the same or different on both ends. For certain applications, special round-to-linear fiber cables are recommended. These cables have a bundle of fibers arranged in a round pattern on one end and a linear array on the other. The linear array (typically 1mm in height) aligns with the spectrometer slit height, also 1mm, maximizing light throughput for high-sensitivity applications. Fiber-optic cable types and diameters are recommended based on the wavelength range and sensitivity required for a measurement. Generally, different fiber types are classified as follows: for the UV range, high OH UV/VIS fiber is used. For measurements below 240 nm in the UV, special high OH UV/VIS fiber called solarization-resistant fiber (SR) is available. For longer wavelengths, low OH VIS/NIR fiber is recommended. Our standard broadband fiber combines the performance of UV, UV-SR, and IR fibers, offering the best of both worlds.Depending on application requirements, Avantes offers various jacketing options, including Kevlar-reinforced PVC sleeving with PTFE inner tubing (Standard), heavy industrial chrome-plated brass mono-coil, stainless steel (BX), silicone-coated stainless steel mono-coil (MS), flexible chrome-plated brass outer jacket with hooked profile (ME), and other special jacketings upon request. For high-temperature applications, special high-temperature epoxy (HT) is available and should be specified at the time of order.Recommended wavelengths for different cables:200-2500 nm: UV/VIS/NIR (UVIR)UV/IR available in core sizes 100, 200,400, 600 μm200-800 nm: Solarization-resistant (-SR)250-800 nm: UV/VIS (UV)350-2500 nm: VIS/NIR (IR)Multi-Furcated Fiber-Optic CablesFor simultaneous multi-point measurements and use with Avantes multi-channel spectrometers, multi-furcated fiber-optic cables are essential. These assemblies can function as either a combiner or splitter of light, featuring multiple legs on one side that converge into a single connector on the opposite side. Avantes offers virtually any combination possible, tailored to meet your specific requirements.Typical setups that require multi-furcated cables are:Various types of connectors, jacketings, and fibre sizes are available for these multi-furcated fiber cables. Contact us to configure and quote you on your specific needs.

Two recirculating chillers in one cabinet, up to 900 W cooling capacity, 24 V DC power supply The DmRC-C-900-24-KIT is a development kit suitable for applications requiring high water cooling performance in the smallest of spaces for water coolers. Based on miniature compressors, this "mini Recirculating Chiller" development kit provides two independent water cooling systems in a 19-inch rackmount insert, which can provide a combined maximum cooling capacity of 900 W. With this double chiller concept, DmRC-C-900-24-KIT can cool two heat loads independently of each other – the target temperatures for each of the two heat loads can be set individually. The compressors’ BLDC motors are speed controlled and offer low vibration and low noise throughout the speed range. Since the water circuit is pressurized, DmRC-C-900-24-KIT manages with very small tanks (2 x 275 ml) – without the risk of cavitation in the smoothly operating centrifugal pumps. Overpressure on the cooling system also prevents the ingress of bacteria and oxygen and thus extends the maintenance intervals. An electric air pump generates the pressure on the two water circuits and is also used for automatic complete filling and emptying of the cooling water circuits, simplifying the maintenance of the system. For customer requirements that cannot be covered by the DmRC-C-900-24-KIT, our thermal management specialists at AMS Technologies are happy to develop a completely tailor-made solution and offer all services from development through to series production. Specifications: Power Supply: <700 W (max. 29 A @ 24 V DC) Cooling Capacity (approximately): 900 W (2 x 450 W, TWATER +25 °C, TAMBIENT +25 °C) Temperature Range: ± 1 K (over-/undershoot at 250 W load ON/OFF), ± 0.2 K (continuous operation) Hydraulic Parameters: flow rate 1 lpm to 5.5 lpm @ 1 bar to 0.2 bar pressure drop at heat load Cabinet: rack-mount, 19”, aluminium housing Weight: 20 kg (Dry Weight: 19 kg) Dimensions (WxHxD): 440 mm x 220 mm x 350 mm (main body, without flanges)