Ultra-compact, Adjustable Output; Input Voltage 11.5 – 13.5 VDC, 22.5 – 26.5 VDC; Output Voltage 300 V, 600 V, 1 kV, 2 kV The HV4479 series is a direct replacement and pin-to-pin compatible to the standard 4479 converters. The micro-size and lightweight converters feature very low noise and low drift and are available as 12V and 24V models. The HV4479 has voltage and current monitors, a low temperature coefficient and is protected against arc and short-circuit. It is available with output voltages of 300 V, 600V, 1kV and 2kV. Key features: Very low noise – very low drift Vout: 300V, 600V, 1kV or 2kV models Vin: 12 or 24V options Polarity: fixed, negative or positive options Remote voltage programming or embedded potentiometer Voltage & current monitors Output overshoot free, limited slew rate Applications: Photomultiplier tubes and avalanche photo diodes

Compact Size; Input Voltage 4.5 to 15.5 VDC; Output Voltage 200 to 500 VDC, programmable from 0 to 100%; Output Power 100 mW The highly compact SDS's APD series is specially designed to meet the high voltage power requirements of scientific instrumentation used in the industrial, medical and military sectors. These modules provide access to voltages of up to 500 VDC in instruments where space is an important factor in order to achieve greater quantum efficiency and reduced total leakage current. With its ultra-miniaturized (5.75 cm³) metal case, the APD HV DC/DC converter series features low radiation noise. The devices are also lightweight (13 g) and allow for flat mounting on printed circuit boards with a height of only 11 mm. 64 models provide voltages from 200 VDC to 500 VDC at a power level of 0.1 W.Tight line and load regulation of <±0.01%, a low temperature coefficient of 50 ppm/°C and a low ripple of 7mVp-p all contribute to the APD series’ very high output stability. Key Features: Micro size and lightweight PCB flat mounting Voltage monitor Tight line & load regulation Arc and short circuit protected Inhibition mode Low ripple Low temperature coefficient Optional flying lead for HV output Applications: Small, Lightweight, Portable Devices; Fiber-optic Telecom Detectors; Particle Physics Detectors; Laser Range Finder Detectors; Thin-film Bias; Avalanche Photo Diodes (APD); Silicon Photomultipliers (SiPM); Multi-pixel Photon Counter (MPPC); Ionization Detectors; Ultrasonic Transducers; Small PZT Drivers; ATE Leakage Testing; Bias Supplies

Input Voltage 12-15 VDC; Output Voltage 200 VDC; Output Power 0.1 W; PCB flat Mounting; Negative Output Voltage This item is compatible with Advanced Energy item number 0.2US12-N0.1 Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.

Input Voltage 12-15 VDC; Output Voltage 300 VDC; Output Power 0.1 W; PCB flat Mounting; Negative Output Voltage This item is compatible with Advanced Energy item number 0.3US12-N0.1 Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.

Input Voltage 12-15 VDC; Output Voltage 500 VDC; Output Power 0.1 W; PCB flat Mounting; Negative Output Voltage This item is compatible with Advanced Energy item number 0.5US12-N0.1 Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.  

Input Voltage 5 VDC; Output Voltage 200 VDC; Output Power 0.1 W; PCB flat Mounting; Negative Output Voltage This item is compatible with Advanced Energy item number 0.2US5-N0.1 Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.

Input Voltage 5 VDC; Output Voltage 200 VDC; Output Power 0.1 W; PCB flat Mounting; Positive Output Voltage This item is compatible with Advanced Energy item number 0.2US5-P0.1 Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.

Input Voltage 5 VDC; Output Voltage 200 VDC; Output Power 0.1 W; PCB flat Mounting; Positive Output Voltage This item is compatible with Advanced Energy item number 0.2US5-P0.1-WS Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.

Input Voltage 5 VDC; Output Voltage 300 VDC; Output Power 0.1 W; PCB flat Mounting; Positive Output Voltage This item is compatible with Advanced Energy item number 0.3US5-P0.1 Further variants of this series with various inputs, outputs voltages and powers are available.For more information or to place an order please look into the datasheet or contact us.

Input Voltage 5 VDC; Output Volage 400 VDC; Output Power 0.1 W; PCB flat Mounting; Positive Output Voltage This item is compatible with Advanced Energy item number 0.4US5-P0.1 Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.

Input Voltage 5 VDC; Output Voltage 500 VDC; Output Power 0.1 W; PCB flat Mounting; Positive Output Voltage This item is compatible with Advanced Energy item number 0.5US5-P0.1 Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.

Ultra-compact, Adjustable Output; Input Voltage 15, 24 VDC; Output Voltage 0 to 4,000 VDC; Output Power 1 to 4 W  The DA series of PCB mount, ultra compact, regulated, high voltage DC/DC converters is particularly adapted to controlling photonic detectors that need high bias voltages and currents. Industrials, integrators and researchers will benefit from the units small size, lightweight design, excellent voltage regulation and reduced residual undulation. Key Features: Small Height and Lightweight Tight Line/Load Regulation Low Ripple (0.005% p. to p.) PCB Flat Mounting Voltage Monitoring Input Monitoring Logical ON/OFF Input Applications: Avalanche Photo Diodes (APD); Electrostatic Chuck (E-chuck); Gas Chromatography; Geiger-Mueller Tubes (GM Tubes); Particle Physics Detectors; Scanning Electron Microscopes; Laser Range Finder Detectors; Photomultiplier Tubes (PMT); PZT Drivers

Input Voltage 24 VDC; Output Voltage 1000 VDC; Output Power 1 W; PCB flat Mounting; Negative Output Voltage This item is compatible with Advanced Energy item number 1D24-N1 Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.

Input Voltage 24 VDC; Output Voltage 4000 VDC; Output Power 2 W; PCB flat Mounting; Negative Output Voltage This item is compatible with Advanced Energy item number 4D24-N2 Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.

Input Voltage 24 VDC; Output Voltage 1000 VDC; Output Power 2 W; PCB flat Mounting; Positive Output Voltage This item is compatible with Advanced Energy item number 1D24-P2 Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.

Input Voltage 24 VDC; Output Voltage 4000 VDC; Output Power 2W; PCB flat Mounting; Positive Output Voltage This item is compatible with Advanced Energy item number 4D24-P2 Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.

Ultra-compact, Adjustable Output; Input Voltage 15, 24 VDC; Output Voltage 0 to 6,000 VDC; Output Power 1 to 6 W  The DE series of PCB mount ultra compact, regulated, high voltage DC/DC converters is particularly adapted to controlling photonic detectors that need high bias voltages and currents. Industrials, integrators and researchers will benefit from the units small size, lightweight design, excellent voltage regulation and reduced residual undulation. Key Features: Small Height and Lightweight Tight Line/Load Regulation Low Ripple (0.02% p. to p.) PCB Flat Mounting Voltage Monitoring Input Monitoring Logical ON/OFF Input Applications: Avalanche Photo Diodes (APD); Electrostatic Chuck (E-chuck); E-Beam Lithography and Welding; Focused Ion Beam (FIB); Gas Chromatography; Geiger-Mueller Tubes (GM Tubes); General Laboratory; High Voltage Testing; Image Intensifiers (II); Insulator Testing; Lithography; Microchannel Plates (MCP); Photodiodes (PD); Photomultiplier Tubes (PMT); Scanning Electron Microscopes; Spectrometers

Input Voltage 24 VDC; Output Voltage 1000 VDC; Output Power 6 W; PCB flat Mounting; Negative Output Voltage This item is compatible with Advanced Energy item number 1D24-N6 Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.

Input Voltage 24 VDC; Output Voltage 6000 VDC; Output Power 4 W; PCB flat Mounting; Negative Output Voltage This item is compatible with Advanced Energy item number 6D24-N4 Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.

Input Voltage 190-260 VAC; Output Voltage ≤2,000 V; Power 3,500 W; Max. Average Output Current 4 A; Efficiency @ Full Power >90%; Leakage Current <500 µA; Regulation 0.2% @ Vmax Energy Pulse Systems’ ECAPACITAS-3kW5 is a robust positive power supply series targeted to charge energy storing capacitors up to 2,000 V. ECAPACITAS-3kW5 is a compact, easy to operate and reliable power supply customized to deliver positive output voltages. This power supply is designed with Power Factor Correction (PFC), low conductive noise and leakage current, and the possibility of remote output programming. With dimensions of 270 mm x 135 mm x 155 mm in a OEM package, this single-phase input power supply meets low-RF-noise and high-efficiency requirements for both laboratory and industrial operation. Key Features: 3,500 W in compact OEM Package Power Factor Correction (PFC) Stored Energy: 50 mJ Output Voltage: up to 2,000 V Max. Output Current: 4 A (Average) Regulation: 0.2% (at Vmax) Polarity: Positive Protections: Over Temperature, Short Circuit, Over Voltage, Open Circuit CE Marked EMI EN55011 Low Leakage Current: <500 µA High Efficiency: >90% at Full Power Remote Output Programming Supply Voltage: 190 to 260 VAC, 50/60 Hz Dimensions: 270 mm x 135 mm x 155 mm Weight: 3 kg Applications: Charging of Energy Storing Capacitors; Laboratory and Industrial Operation

Ultra-compact, Adjustable Output; Input Voltage 5, 12 VDC; Output Voltage 0 to 100 VDC; Output Power 100 mW SDS High Voltage's Micro APD series of PCB-mount, ultra compact, regulated, high voltage DC/DC-converters is the smallest regulated DC-DC power supply for APDs and MPPCs that need a bias voltage ranging from 0 to 100V. Key Features: Ultra Miniature and Lightweight Tight Line/Load Regulation Low Ripple (<50 V p. to p.) PCB Flat Mounting Output Current Limit Protection Applications: Avalanche Photo Diodes (APD); Silicon Photomultipliers (SIPM)

Input Voltage 105-250 VAC; Max. Output Voltage 3-30 kVDC; Max. Power 15 W; Voltage Regulation <0.005%; Current Regulation <0.1% XP Glassman’s MJ Series of 15 W high voltage AC/DC power supplies are air-insulated, fast-response, chassis-mount units with tight regulation and low arc discharge currents. A broad range of models is available with output voltage ranges from 0 to 3 kVDC through 0 to 30 kVDC. The MJ Series’ current regulation is unequalled in a module of this price range. For example, the regulation from short circuit to rated voltage for the 15 kV, 1 mA model is ±500 nA. Overload, short circuit and arc protection is provided by automatic current regulation and by careful surge limiting design. XP Glassman’s “Air Insulated” designs are completely serviceable, these modules are not epoxy block “throw-away” power supplies. The MJ Series’ standard operation mode is constant voltage/current with less than 200 mJ of stored energy for most models. A “multi-mode” operation mode permits maximum user flexibility. Local voltage or current control is user selectable, and the MJ Series power supplies feature remote voltage and/or current control via 0 to +10 V signal or potentiometers. External interlock terminals allow enable/disable of the power supply via TTL signal. Standard accessories for the MJ Series include a detachable 2,4 m shielded output cable and mating control connector. The MJ Series supplies with 230 VAC input option (198 to 253 VAC RMS, 48 to 63 Hz) are fully compliant with the following European directives: EN61000-3-2, Line Harmonics EN61010/ IEC61010, Safety EN61000-6-4, Conducted and Radiated Emissions EN61000-6-2:2005, Conducted and Radiated Immunity 2011/65/EU, Restriction of the Use of Hazardous Substances (RoHS) Key Features: Compact Module Air Insulated Low Ripple: <0.05% RMS of Rated Voltage at Full Load, ~0.01% at No Load Tight Regulation Static Voltage Regulation: <0.005%, Line and Load Current Regulation: <0.1% From Short Circuit to Rated Voltage at Any Load Condition Constant Voltage/Constant Current Operation Maximum Output Power: 15 W Maximum Output Voltage: 3 to 30 kVDC Maximum Output Current: 0.4 to 5 mA Input Voltage: 105 to 125, 210 to 250 VAC RMS, 48 to 63 Hz, Single Phase Output Voltage Accuracy: 1% of Setting + 0.5% of Rated Output Voltage Repeatability: <0.1% of Rated Voltage Stored Energy: <200 mJ (15 kV Model), <400 mJ (30 kV Model) Voltage Monitor: 0 to +10 VDC Signal for 0 to Rated Voltage Current Monitor: 0 to +10 VDC Signal for 0 to Rated Current Stability: 0.01%/h After 0.5 h Warm-up, 0.05% per 8 h Polarity: Positive or Negative Polarity With Respect to Chassis Ground Protection: Against All Overload Conditions, Including Arcs and Short Circuits Remote Controls: DB25S D-Sub Connector and Mating Plug Provided for All Control Input Functions Control Input Functions: +10 V Reference, External Interlock, Current Monitor, Current Program, Voltage Monitor, Voltage Program, TTL, Ground, Local Control 3 Year Warranty Approvals: IEC61010-1:2010; EN61000-6-4:2007, Class A EN61000-6-2:2005 Operating Temperature: -20 to +60 °C Dimensions: 82.5 x 109.5 x 292.1/330.2 mm Applications: High Voltage, High Power Applications; Photonics; Healthcare (Analytical, Diagnostics, Detectors); Industrial; Semiconductor Manufacturing; Research; Other

Input Voltage 90-253 VAC; Max. Output Voltage 1-60 kVDC; Max. Power 75 W; Efficiency >75%; Voltage Regulation <0.005% + 1 mV/mA; Current Regulation <0.1% XP Glassman’s MK Series of 75 W high voltage AC/DC power supplies are air-insulated, fast-response, chassis-mount units with tight regulation and low arc discharge currents. A broad range of models is available with output voltage ranges from 0 to 1 kVDC through 0 to 60 kVDC. The MK Series’ current regulation is unequalled in a module of this price range. For example, the regulation from short circuit to rated voltage for the 15 kV, 5 mA model is +2.5 µA. Overload, short circuit and arc protection is provided by automatic current regulation and by careful surge limiting design. XP Glassman’s “Air Insulated” designs are completely serviceable, these modules are not epoxy block “throw-away” power supplies. The MK Series’ standard operation mode is constant voltage/current with less than 800 mJ of stored energy. A “multi-mode” operation mode permits maximum user flexibility. Local voltage or current control is user selectable, and the MK Series power supplies feature remote voltage and/or current control via 0 to +10 V signal or potentiometers. External interlock terminals allow enable/disable of the power supply via TTL signal. Standard accessories for the MK Series include a detachable 2,4 m shielded output cable, mating control connector and line cord. The MK Series supplies with 230 VAC input option (198 to 253 VAC RMS, 48 to 63 Hz) are fully compliant with the following European directives: EN61000-3-2, Line Harmonics EN61010/ IEC61010, Safety EN61000-6-4, Conducted and Radiated Emissions EN61000-6-2:2005, Conducted and Radiated Immunity 2011/65/EU, Restriction of the Use of Hazardous Substances (RoHS) Key Features: Compact Module Air Insulated Low Ripple: <0.03% RMS of Rated Voltage + 0.5 V at Full Load Tight Regulation Static Voltage Regulation: <0.005% + 1 mV/mA, Line and Load Current Regulation: <0.1% From Short Circuit to Rated Voltage at Any Load Condition Constant Voltage/Constant Current Operation Maximum Output Power: 75 W Maximum Output Voltage: 1 to 60 kVDC Maximum Output Current: 1.2 to 75 mA Input Voltage: 105 to 125, 198 to 253 VAC RMS, 48 to 420 Hz, Single Phase Efficiency: >75% at Full Load Output Voltage Accuracy: 1% of Setting + 0.5% of Rated Stored Energy: 200 mJ (10 kV Model), 1 J (50 kV Model) Voltage Monitor: 0 to +10 VDC Signal for 0 to Rated Voltage Current Monitor: 0 to +10 VDC Signal for 0 to Rated Current Stability: 0.01%/h After 0.5 h Warm-up, 0.05% per 8 h Polarity: Positive or Negative Polarity With Respect to Chassis Ground Protection: Against All Overload Conditions, Including Arcs and Short Circuits Remote Controls: DB25S D-Sub Connector and Mating Plug Provided for All Control Input Functions Control Input Functions: +10 V Reference, External Interlock, Current Monitor, Current Program, Voltage Monitor, Voltage Program, TTL, Ground, Local Control Options: 100, 230 VAC Input, 400 Hz Input, Control and Monitor via RS232, USB, Ethernet 3 Year Warranty Approvals: IEC61010-1:2010; EN61000-6-4:2007, Class A EN61000-6-2:2005 Operating Temperature: -10 to +60 °C Dimensions: 120.6 x 131.7 x 279.4 mm Applications: High Voltage, High Power Applications; Photonics; Healthcare (Analytical, Diagnostics, Detectors); Industrial; Semiconductor Manufacturing; Research; Other

Input Voltage 90-264 VAC; Max. Output Voltage 8-60 kVDC; Max. Power 300 W; Efficiency 85%; Voltage Regulation <0.005%; Current Regulation <0.1% of Rated Current XP Glassman’s ML Series of 300 W high voltage AC/DC power supplies are air-insulated, fast-response, chassis-mount units with tight regulation and extremely low arc discharge currents. A broad range of models is available with output voltage ranges from 0 to 8 kVDC through 0 to 60 kVDC. The ML Series is a family of sophisticated, medium-power, high voltage AC/DC power supplies that complies with current international safety and EMI directives. XP Glassman has packaged this series as a space-saving module to avoid the expense of front panels and displays. However, no compromises in performance and/or operating features have been made. The result is a power supply series that offers outstanding value for a wide range of demanding applications. The ML Series features “air” as the primary dielectric medium. No oil or encapsulation is used which would impede serviceability or increase weight. The ML Series also features high-speed dynamic voltage regulation – for load transients of 10% to 99% and 99% to 10%, the output voltage will recover to within 1% in less than 1 ms. Ripple is less than 0.05% of rated voltage at full load, and most models exhibit less than 1 J of stored energy. Automatic crossover from constant-voltage to constant-current regulation provides protection against overloads, arcs, and short circuits. Current mode operation is user-configured for constant-current regulation or current-trip operation. Continuous, stable adjustment from 0 to rated voltage or current is provided by panel-mounted 10-turn potentiometer with 0.05% resolution or by external 0 to 10 V signals. All ML Series supplies are fully RoHS compliant (2011/65/EU, Restriction of the use of hazardous substances). The ML Series supplies with 230 VAC input option (198 to 253 VAC RMS, 48 to 63 Hz) are fully compliant with the following European directives: 2014/30/EU, EMC Directive 2014/35/EU, Low Voltage Safety Directive EN61000-3-2, Line Harmonics Key Features: Maximum Output Power: 300 W Maximum Output Voltage: 8 to 60 kVDC Compact Module Air Insulated Low Ripple: <0.05% RMS of Rated Voltage + 0.5 V at Full Load Tight Regulation Constant Voltage/Constant Current Operation Static Voltage Regulation: <0.005% for Specified Line and Load Variations User-selectable Automatic Current Limiting/Regulation or Current Trip Protects Against All Overload Conditions, Including Arcs and Short Circuits PFC Option Assures Compliance with EN61000-3-2 Current Regulation: <0.1% of Rated Current From Short Circuit to Rated Voltage at Any Load Condition Maximum Output Current: 5 to 37 mA Input Voltage: 90 to 132, 180 to 264 VAC RMS, 48 to 420 Hz, Single Phase Efficiency: 85% Typical at Full Load Output Voltage Accuracy: 0.5% of Setting + 0.2% of Rated Output Voltage Repeatability: <0.1% of Rated Voltage Stored Energy: 0.38 to 2.34 J Voltage Monitor: 0 to +10 VDC Signal for 0 to Rated Voltage Current Monitor: 0 to +10 VDC Signal for 0 to Rated Current Stability: 0.01%/h After 0.5 h Warm-up, 0.05% per 8 h Polarity: Positive or Negative Polarity With Respect to Chassis Ground Interface Control Connector: 25-pin D-Sub Miniature Connector Control Functions: Voltage & Current Program/Monitor, HV Enable, HV Status, Safety Interlock, Current Trip/Limit Select, +10 V Reference, V/I Mode Status, Local Control Options: 100, 230 VAC Input, Slow Start Ramp, 0 to 5 V Voltage & Current Program/Monitor, Power Factor Correction (PFC), Control and Monitor via RS232, USB, Ethernet 3 Year Warranty Approvals: IEC61010-1:2010; EN61000-6-4:2007, Class A EN61000-6-2:2005 Operating Temperature: -20 to +50 °C Dimensions: 120.7 x 184.2 x 374.6/520.7 mm Applications: High Voltage, High Power Applications; Photonics; Healthcare (Analytical, Diagnostics, Detectors); Industrial; Semiconductor Manufacturing; Research; Other