AMS Technologies
Copper Tubes Fin Heat Exchanger C032363_002_002
Aluminum fins; Copper tubes; 1 fan; 147.1x159x50.8 mm; 10-pass; 150psi/10bar max; 7.6 lpm max Water-to-air heat exchanger main dimensions HX housing: 147,1 mm x 159 mm x 50,8 mm Tubes and tube connections: Copper, OD 3/8" Connection tube length 55,8 mm Fins: Aluminum, thickness 0,15 mm HX housing and end plates: stainless steel, 1 mm without fan plate Specified for fluid pressures of at least 150psi/10bar max. 7,6 l/min water flow
LCP ET 88,9x12,7x150/2Pass_Cu Cold Plate
150x88.9x12.7 mm; Aluminum; Copper Tubes; 2 -PassLCP ET 88,9x12,7x150/2Pass_Cu is an aluminum cold plate combined with 2-pass copper tubes. The exclusive section shape, pressed in the base plates without glues or resins, maximizes adhesion and minimizes any thermal impedance between the tube coil and the plate, both on the straight and curved parts of the design.We can design embedded tube cold plates to be fully customized for the individual needs of each specific design, regardless of the application for which the plate is designed. Get in touch with our thermal experts to discuss your specific requirements.
mAC-C-400-24 mini Air Cooler Cabinet Cooler
Cabinet Cooler; Compressor Based; 400 W @+26°C Cabinet, +35°C Ambient; 24 VDC; 13 A; Flush Mount; Temperature Stability ±0.05 K Key Features: Miniature Compressor-based Air Cooler for Cabinet Cooling Tasks up to 400 W Compact Dimensions and Low Weight Compared to Peltier-based & Other Compressor-based Coolers Easy to be Attached to Customer Cabinet IP65 Environmental Protection (Ambient Side) – For Operation in Harsh Environments 24 VDC Power Supply – Independent of Mains AC Voltage or Frequency Integrated Temperature Controller Speed-controlled Compressor – no Hysteresis, Stabilized Temperature to ±0.05 K PWM Speed-controlled Fan for Noise Reduction IoT Ready: Remote Operation, Monitoring and Service over Integrated Ethernet Interface AMS Technologies’ mAC-C-400-24 compact and rugged, compressor-based mini air cooler provides cabinet cooling capacities up to 400 W. In comparison to Peltier-based cabinet coolers, the highly efficient mAC-C-400-24 features significantly lower size and weight due to its miniature compressor and customized condenser/evaporator. A powerful fan moves the cabinet internal air at 130 m³/h. The internal air's temperature is maintained at the set value within ±0.05 K by an integrated circuit controlling the rotary compressor’s speed. The external fan is PWM speed controlled for noise reduction. Global Use: Its 24 VDC supply voltage allows the mAC-C-400-24 to operate from the cabinet’s 24 VDC voltage rail, with no need to care for the local mains voltage or frequency. IoT Ready: Access the mini air cooler’s system parameters from any location via the integrated Ethernet interface, also allowing remote control, service and even firmware update. Your customized air cooler: The mAC-C-400-24 cannot cover your requirements? AMS Technologies’ thermal management specialists are happy to develop a solution tailored to your needs – based on compressor or Peltier technology – and offer all services from development and proof-of concept to series production. Get in touch with us now to discuss your customized air cooler. Specifications: Cooling Capacity: 400 W @+26°C Tchilled cabinet air +35°C Tambient Temperature Stability: ±0.05 K External Working Temperature Range: +10°C to +50°C Internal Working Temperature Range: +15°C to +35°C Operating Voltage: 24 VDC Max. Operating Current: 13 A Max. Power Consumption: 310 W Refrigerant: R134a, 130 g (0.19 tequCO2) Dimensions: 310 x 157 x 475 mm Weight: 15 kg Orientation: Flush Mount, Side Wall or Door Environmental Protection Level, Enclosure Side: IP2X Environmental Protection Level, Ambient Side: IP65 Approvals: CE Applications: Cabinet Cooling; Cooling of Air inside Cabinets for Applications With up to 400 W Power Dissipation; Harsh Environments
mDC-T-130-24-KIT Thermoelectric Plate-To-Air Cooling Kit
Peltier Cooling Assembly Kit; Cooling Capacity 130 W @+25°C; with Detachable Carrier Plate; Power Supply 24 VDC Key Features: Ideal for Precise Cooling of Medical and Industrial Lasers Efficient Peltier System, no Liquids, no Moving Parts (Except Fans) Allows for Excellent Temperature Stability Low Vibration, Low Noise Lightweight, Very Compact Easy to Integrate The compact mDC-T-130-24-KIT thermoelectric plate-to-air cooling kit was developed for precise temperature control of laser diode modules and direct heat transfer to the ambient air. The highly efficient, solid state mini direct cooling system reaches a cooling capacity of 130 W for 24 VDC supply voltage and +25°C on laser mounting plate and +25 °C ambient temperature. The mDC-T-130-24-KIT Peltier cooling assembly kit comes with a 108 mm x 108 mm mounting plate that can be removed without the need to dismantle the Peltier assembly and can be worked on, i.e. individual mounting patterns can be drilled by the customer. The kit comes with graphite foil and screws pre-mounted. The Peltier modules can be configured for either 12 or 24 VDC. Depending on cooling requirements, the 60 x 60 mm fans' speed can be reduced for quiet operation. We also carry a large range of suitable temperature controllers that can be found here. If your application requires higher cooling capacities, take a look at our mRC-C-450-100/240 mini Recirculating Chiller and our liquid cooling solutions offerings – or browse our large portfolio of liquid to air temperature management assemblies. Your customized direct cooler: AMS Technologies’ thermal management specialists are happy to develop a direct cooling solution tailored to your needs – based on Peltier or compressor technology – and offer all services from development and proof-of concept to series production. Get in touch with us now to discuss your customized direct cooler. Specifications: Nominal Cooling Capacity: 130 W (@+25°C Ambient, +25°C Mounting Plate (Bottom)) Power Consumption per Fan (Manufacturer’s Data): 6 W Max. Noise (Manufacturer’s Data): 49 dB(A) Coefficient of Performance (COP): 0.57 Applications: Direct Cooling and Precise Temperature Control of Laser Diode Modules With Power Dissipation of up to 130 W
mLC-C-1200-24-KIT mini Liquid Cooling Kit
mini Liquid Cooling Evaluation Kit; Cooling Capacity 1200 W @+25°C; Power Supply 24 VDC Key Features: Up to 1200 W Cooling Capacity Ideal for Compact Cooling of Lasers or Bio Reagents Compressor Speed Control for Ease of Temperature Control Low Vibration, Low Noise Lightweight, Compact Easy to Integrate Kit to Interface With OEM Water Circuit and Electronics Control Components Carefully Designed to Match Each Other The mLC-C-1200-24-KIT is a sealed vapor compression circuit with a speed controlled miniature rotary BLDC compressor. The evaporator is a brazed plate heat exchanger, the interface to the customer liquid coolant circuit. The mLC-C-1200-24-KIT comes with the separate 24 VDC inverter board. The compressor speed can be set from the upper control system by frequency or analog signal. The mLC-C-1200-24-KIT’s condenser is an aluminum finned copper tube heat exchanger coil and must be cooled by forced convection, i.e. a 200 mm diameter fan or equivalent. The heat exchanger stainless steel plates are nickel brazed suitable for a variety of coolant fluids, such as water, DI water and glycol-water mixtures. The plate heat exchanger has male R ¼” connectors for the customer to connect its water circuit.For lower heat loads, we also carry a mLC-C-450-24-KIT with up to 450 W cooling capacity, or a Peltier-based mini Direct Cooling KIT providing up to 130 W with no liquids or moving parts (except fans). If you are looking for a ready-to-use recirculating chiller that includes the coolant loop, have a look at our family of mini Recirculating Chiller Kits (mRC-KITs) as well as our our other liquid cooling solutions offerings – or browse our large portfolio of liquid to air temperature management assemblies . Your customized liquid cooler: AMS Technologies’ thermal management specialists are happy to develop a liquid cooling solution tailored to your needs – based on Peltier or compressor technology – and offer all services from development and proof-of concept to series production. Get in touch with us now to discuss your customized liquid cooler.Specifications: Cooling Capacity: Approximately 930 W (at 59 rps, Twater = +20°C, Tambient = +40°C) to 1760 W (at 90 rps, Twater = +20°C, Tambient = +20°C) Power Supply Consumption: ≤720 W (30 A @24 VDC) Temperature Range (Ambient, Operating): +15°C to +45°C Hydraulic parameters: Pressure Drop 40 mbar @6 lpm, 100 mbar @9 lpm Controller/Inverter Board: Operating Range 28 to 100 rps, Speed Command Square Wave Pulse Frequency 56 to 200 Hz, Variable Resistor Input 2.8 to 10 kΩ Dimensions: 250 x 386 x 248 mm (WxHxD) Weight: 10 kg Applications: Compact Cooling of Lasers or Bio Reagents With up to 1200 W Cooling Capacity; Evaluation Kit to Interface With OEM Water Circuit and Electronics Control
mLC-C-450-24-KIT mini Liquid Cooling Kit
mini Liquid Cooling Evaluation Kit; Cooling Capacity 450 W @+25°C; Power Supply 24 VDC Key Features: Up to 450 W Cooling Capacity Ideal for Compact Cooling of Lasers or Bio Reagents Ideal for Mobile Cooling Applications Compressor Speed Control for Ease of Temperature Control Low Vibration, Low Noise Lightweight, Compact Easy to Integrate Kit to Interface With OEM Water Circuit and Electronics Control Components Carefully Designed to Match Each Other The mLC-C-450-24-KIT is a sealed vapor compression circuit with a speed controlled miniature rotary BLDC compressor. The evaporator is a brazed plate heat exchanger, the interface to the customer liquid coolant circuit. The mLC-C-450-24-KIT comes with the separate 24 VDC inverter board. The compressor speed can be set from the upper control system by frequency or analog signal. The condenser is an aluminum finned copper tube heat exchanger coil and must be cooled by forced convection, i.e. a 120x120 mm fan or equivalent. The heat exchanger stainless steel plates are nickel brazed suitable for a variety of coolant fluids, such as water, DI water and glycol-water mixtures. The plate heat exchanger has male R ¼” connectors for the customer to connect its water circuit. The mLC-C-450-24-KIT’s condenser is an aluminum finned copper tube heat exchanger coil and must be cooled by forced convection, i.e. a 120x120 mm fan or equivalent. The heat exchanger stainless steel plates are nickel brazed suitable for a variety of coolant fluids, such as water, DI water and glycol-water mixtures. The plate heat exchanger has male R ¼” connectors for the customer to connect its water circuit. If you are looking for a ready-to-use recirculating chiller based on this mLC-Kit that includes the coolant loop, have a look at our mRC-C-450-100/240 mini Recirculating Chiller as well as our other liquid cooling solutions offerings – or browse our large portfolio of liquid to air temperature management assemblies. For lower cooling capacities, we also carry a Peltier-based mini Direct Cooling KIT providing up to 130 W with no liquids or moving parts (except fans). Your customized liquid cooler: AMS Technologies’ thermal management specialists are happy to develop a liquid cooling solution tailored to your needs – based on Peltier or compressor technology – and offer all services from development and proof-of concept to series production. Get in touch with us now to discuss your customized liquid cooler. Specifications: Cooling Capacity: Approximately 450 W (at 100 rps, Twater = +25°C, Tambient = +25°C) Power Supply Consumption: < 150 W (6 A @24 VDC, 80 rps) Temperature Range (Ambient, Operating): -10°C to +45°C Hydraulic Parameters: Pressure Drop 30 kPa @4 lpm Controller/Inverter Board: Operating Range 20 to 100 rps, Speed Command Square Wave Pulse Frequency 40 to 200 Hz, Variable Resistor Input 2 kΩ to 10 kΩ Dimensions: 200 x 172 x 180 mm (WxHxD) Weight: 3.4 kg Applications: Compact Cooling of Lasers or Bio Reagents With up to 450 W Cooling Capacity; Mobile Cooling Application; Evaluation Kit to Interface With OEM Water Circuit and Electronics Control
Stainless Steel Tubes Fin Heat Exchanger AMS-148x140x47-1-06-SS-CU
Copper Fins; Stainless Steel Tubes; 148.3x139.6x46.5 mm; 6-pass; 60 barWater-to-air heat exchangermain dimensions HX housing: 148,3 mm x 139,6 mm x 46,5 mmTubes and tube connections: stainless steel 316L, OD 3/8"Connection tube length 53 mm6 pass, return-bends weldedCorrugated copper fins; thickness 0,12 mm; 18 fpiHX housing and end plates: stainless steel 304/316LHX housing including fan mount, with M4 cage-nuts/press-nutsSpecified fluid pressure: max. 60 bar
Stainless Steel Tubes Fin Heat Exchanger AMS101-1000AS-HE
Copper Fins; Stainless Steel Tubes; 148.3x139.6x46.5 mm; 12-pass; 60 bar Water-to-air heat exchanger main dimensions HX housing: 148,3 mm x 139,6 mm x 46,5 mm Tubes and tube connections: stainless steel 316L, OD 3/8" Connection tube length 53 mm 12 pass, return-bends welded Corrugated copper fins; thickness 0,12 mm, 18 fpi HX housing and end plates: stainless steel 304/316L HX housing including fan mount, with M4 cage-nuts/press-nuts Specified fluid pressure: max. 60 bar
Stainless Steel Tubes Fin Heat Exchanger AMS102-1000AS-HE
Copper Fins; Stainless Steel Tubes; 148.8x266.7x46.5 mm; 12-pass; 60 bar Water-to-air heat exchanger main dimensions HX housing: 148,8 mm x 266,7 mm x 46,5 mm Tubes and tube connections: stainless steel 316L, OD 3/8" Connection tube length 53 mm 12-pass, return-bends welded Corrugated copper fins; thickness 0,12 mm, 18 fpi HX housing and end plates: stainless steel 304/316L HX housing including fan mount for 2 fans, with M4 cage-nuts/press-nuts Specified fluid pressure: max. 60 bar
2D Mode Solver Software
Wavelength Band UV-SWIR, 400-2150 nm; Scalar FEM Numerical Engine; Solution in Seconds; ASCII Fiber Profile Input & Data Output; System Requirements 64-bit MS Windows Based on fiber refractive index profile data, Interfiber Analysis’ “2D Mode Solver” software package computes guided modes and mode properties, fiber bending/coiling effects, as well as mode coupling at splices. The software tool can analyze either 1-dimensional or 2-dimensional fiber index data so it can quantify the impact of any asymmetries in the fiber index profile. With this tool, you can: Compute 2-dimensional fiber modefields and mode properties Predict mode coupling at fiber splices Model fiber bending effects Quantify impact of index profile asymmetries Determine overlap between modes and cores Analyze fiber, preform, or synthetic index profiles These capabilities make the software particularly useful for customers working with high-power optical fibers. It is not only useful for existing IFA-100 users (who can use it to compute modes based on their IFA-100 data,) but also for those who use other equipment as it can be applied to fiber index data from other measurement devices (including preform profilers). This very attractively priced software tool runs on MS Windows 64-bit computers, and unlike other competing software packages, we offer multiple licenses at the customer location for the price of a single purchase. Key Features: System Requirements: MS Windows 64-bit Computer Numerical Engine: Scalar Finite Element Method (FEM) Wavelength Band: UV to SWIR (400 nm to 2150 nm) Solution Domain: 140 µm Diameter Disk Solution Time: Seconds Fiber Profile Input: ASCII Text Files (1- and 2-dimensional) Data Output: ASCII Text, PNG or PDF Images Computed Mode Properties: Electric Field, Optical Intensity, Effective Index, Group Index, Dispersion, Mode Field Diameter, Effective Area Applications: Computing of Guided Modes, Mode Properties, Fiber Bending/Coiling Effects, Mode Coupling at Splices
REQUEST PRICING AND AVAILABILITY
- Get your individual quote.
- Technical compatibility review included.
- Volume discounts available.
No obligation. Direct access to our engineering team.
mRC-C-450-100/240 mini Recirculating Chiller
Vapor Compression Chiller; 450W @+25°C; 230VAC; 2lpm; USB/ Ethernet; Benchtop Key Features: Miniature Recirculating Water Chiller Compact Size, Easy to be Integrated in Customer Application User-Definable PID Parameters and Fan Velocity Calm Operation With Low Vibration and Noise Ideal for Water Cooling Tasks up to 450 W IoT Ready: Remote Operation, Monitoring and Service over Integrated Ethernet Interface Full chiller power in a shoebox form factor: the mRC-C-450-100/240 mini recirculating chiller provides to 450 W cooling capacity and contains a compressor-based refrigerant circuit as well as a closed, recirculating coolant (water) circuit that is pressurized – all that in a compact, 350 x 290 x 230 mm housing. This small size is enabled by utilizing a miniature rotary compressor, customized miniature evaporator and condenser. On the coolant side, pressurizing the circuit allows a very small tank, and a compact centrifugal pump also contributes to reduced space requirements. Due to the speed-controlled compressor, the mRC-C-450-100/240 chiller offers low vibration and noise throughout the compressor’s BLDC speed range. Further features are automatic fill and drain of the coolant circuit, global operability due to a universal 90 to 264 VAC power supply, and an integrated Ethernet interface allowing remote operation, monitoring and service. Specifications: Cooling Capacity: 300 W (Twater = +20°C, Tambient = +40°C) to 500 W (Twater = +20°C, Tambient = +20°C) Temperature Stability: +2/-1.5 K Over-/undershoot at 250 W Heat Load ON/OFF, Down to 0.05 K Continuous Operation Available Pressure Head: 1.5 bar @1 lpm; 0.5 bar @5.5.lpm Noise Level: 63 dBA (fan 40%, compressor 100%) Control: Local, USB/Serial, Internet (Web Browser) via Ethernet (IoT Ready) Interlock I/O Alarms: Liquid Level, Tank Pressure, Coolant Feed Temperature, Coolant Flow Rate, Condenser Pressure Power Supply: 90 to 264 VAC, 24 VDC Derivative Available on Demand Power Consumption: <300 W Dimensions: 350 x 280 x 230 mm, Main Body Without Filter Weight: 13 kg Approval: CE Applications: Water Cooling of Lasers and Other Applications; Integration of Water Cooling Capabilities in Systems with Limited Space
REQUEST PRICING AND AVAILABILITY
- Get your individual quote.
- Technical compatibility review included.
- Volume discounts available.
No obligation. Direct access to our engineering team.
Refractive Index Measurement Services
Measurement of 1-D, 2-D, 3-D Fiber Refractive Index Profiles; No Costly Instrument Purchase; 500 to 1000 nm; Refractive Index Accuracy ±0.0001; Spatial Resolution 500 nm Based on Interfiber Analysis’ IFA-100 multi-wavelength interferometric optical fiber analyzer, AMS Technologies offers refractive index measurement services for product development, incoming inspection and forensic analysis on optical fibers. At our testing facility in Munich we can secure quick sample turnaround and offer confidentiality of measurement results. The refractive index profile allows determination of key transmission parameters like chromatic dispersion, mode field diameter, bandwidth, birefringence and polarization mode dispersion (PMD). Line plots and tomography scans: The measurements can be taken in one dimension giving a line plot of the refractive index at any given cross section of the fiber. This measurement assumes the fiber to be symmetrical, and symmetrical geometry is assumed for the computation of the refractive index profile. For the two-dimensional measurements, several lower-dimensional projections are combined to form a full surface profile of the refractive index. This computer tomography based approach does not take assumptions for the fibers being symmetric. Environmental testing solution: The interferometry measurement technique used in the setup does not require external calibration. Measurements can be done with fiber diameters from 40 to 400 µm within a measurement wavelength from 500 to 1000 nm. Fiber material can be silica glass, non-silica glass or plastic. The accuracy of index of refraction is ±0.0001, accuracy of stress measurement is ±5 MPa. Contact AMS Technologies’ fiber property measurement experts to find out how our refractive index measurement services can solve your measurement challenges! Key Features: Measurement of 1-D, 2-D, and Even 3-D Fiber Refractive Index Profiles No Costly Instrument Purchase Rapid Turnaround Experienced Measurement Staff Any Fiber Type: Single Mode (SM), Multi Mode (MM), Polarization Maintaining PM), Micro-Structured (PCF), Multicore, Rare-earth, Cladding-pumped, Large Mode Area (LMA), Low Bend Loss, High-Δ, etc. Any Fiber Material: Silica, Non-silica, Plastic Any Fiber Diameter From 40 to 750 μm Any Measurement Wavelength From 500 to 1000 nm Sub-μm Fiber Geometry Measurements Sample Lengths Can be as Sort as Centimeters Refractive Index Accuracy: ±0.0001 Sub-µm Spatial Resolution: About 500 nm No Cleave Required Fiber Diameter: 40 to 400 µm Fiber Material: Silica Glass, Non-silica Glass, Plastic Concentricity Error Measurement: ±200 nm Core Non-circularity Error Measurement: ± 0.4% Applications: One-Dimensional Refractive Index Measurement; Two-Dimensional Refractive Index Measurement; One-Dimensional Stress Measurement; Three-Dimensional Refractive Index Measurement
REQUEST PRICING AND AVAILABILITY
- Get your individual quote.
- Technical compatibility review included.
- Volume discounts available.
No obligation. Direct access to our engineering team.
The crazy AMS Puzzle
What is "The crazy AMS Puzzle"? Play the “The crazy AMS puzzle” and experience our consultancy and solution approach. Only the right mix of technologies (optical, thermal, power) on one side, and consultancy, project management and communication with the customer on the other enable solving the challenges of our customers’ projects: the right solution works only when all involved parts fit together in a perfect match – At the same way, the puzzle can only be solved if all images on the pieces match up. AMS Technologies has the expertise to help solving difficult tasks and finding the appropriate solution! We are at the customer’s side to discuss, develop, test, rediscuss, redevelop, retest…we are willing to spend a lot of time and effort to come to the right solution. Aim of the game: The puzzle has 9 pieces. Each piece has a half of one image on each side. The aim of the game is to solve the puzzle in a 3x3 square by arranging the 9 pieces such as all halves of the images are adiacent to their appropriate counterpiece. All images need to match up (like all parts of a project do). Play it also online in our Online App The crazy AMS Puzzle!
REQUEST PRICING AND AVAILABILITY
- Get your individual quote.
- Technical compatibility review included.
- Volume discounts available.
No obligation. Direct access to our engineering team.