pco.panda 4.2 bi sCMOS Camera

Resolution 1008x1008 pixels; Modulation Frequency 5 kHz - 40 MHz (out), 500 kHz - 40 MHz (in); Peak Quantum Efficiency 39%; Dynamic Range A/D 14 bitpco.flim is the first frequency domain (FD) FLIM camera employing a two-readout-tap per pixel CMOS sensor. This innovation allows for synchronized modulation of pixels and stimulated light, facilitating the analysis of luminescence decay times ranging from sub-nanoseconds to microseconds. Boasting a resolution of 1008 x 1008 pixels, the pco.flim achieves a maximum readout speed of 45 double frames per second and supports a modulation frequency range of 5 kHz to 40 MHz. Its adaptable coupling and straightforward setup make it the ideal choice for widefield FD-FLIM instruments.Key features: Flexible coupling to any microscope or lens via C-MountUSB 3.0 interface for easy computer connectionpco.flim laser availableApplications: Together with pco.flim laser suitable for wide-field epifluorescence microscope illumination, Total-Internal-Reflection-Fluorescence (TIRF) microscopy, light sheet fluorescence microscopy (LSFM) and confocal spinning disk microscopy Please note that Excelitas products are available from us only in Denmark, Finland, Iceland, Norway, and Sweden. 

304 mm X 127 mm, 0.004 °C/W, Tubed Cold Plate.The CP12™ is a dual-sided, copper tubed cold plate that offers high performance and a large mounting area. The tubes of the CP12™ cold plates are coplanar with the plate to allow for dual-sided mounting. The cold plate's tube side offers higher performance as the copper tubes are in direct contact with the component being cooled. Its epoxy-free construction results in 30% better performance than other similar sized cold plates. Our range of standard tubed cold plates provide cost-effective thermal solutions for component cooling applications where the heat load is low-to-moderate. These tubed cold plates consist of copper tubes pressed into a channeled aluminum extrusion. This “Press-Lock” technology eliminates the need for performance-limiting epoxy between the tube and the plate, resulting in superior thermal performance. Each tubed cold plate has a single tube with no joint, ensuring leak-free operation.

The ThermoWrap Kit is a compact, energy-efficient thermal control solution engineered for precise temperature regulation of chemical canisters, fluid bottles, and other liquid containers. Designed by Solid State Cooling Systems (SSCS), this innovative kit offers a low-cost, versatile alternative to traditional recirculating baths. Whether you need cooling, heating, or ambient control, ThermoWrap delivers ±0.1°C stability across a wide operating range, making it ideal for demanding laboratory, bioprocessing, and industrial applications.Unlike bulky bath chillers, ThermoWrap keeps containers dry and simplifies bottle changes while consuming up to 80% less power. Its flexible fluid pad conforms to various container sizes and shapes, and one SSCS chiller can control multiple wraps simultaneously—streamlining your setup and reducing operational costs.Key featuresPrecision temperature control: Maintains temperatures from 0°C to 50°C with ±0.1°C stability at constant load.Energy efficiency: Uses up to 80% less power than traditional bath chillers, supporting sustainable lab operations.Compact and versatile: Offers a simple, space-saving alternative to open recirculating baths with flexible sizing options.Multi-wrap capability: A single SSCS chiller can manage multiple ThermoWraps, enhancing scalability and efficiency.Dry container handling: Keeps bottles and canisters dry, reducing contamination risk and simplifying maintenance.Complete kit: Includes a 5.75” or 8” x 20” recirculating fluid pad, two fully insulated fluid hoses, and an optional insulating bag for enhanced thermal control.Durable and reliable: Operates within ambient temperatures of 10°C to 40°C and supports fluid pressures up to 20 psig (1.38 bar-g).Compatible systems: Recommended for use with SSCS chillers such as the T-Three, TCube Edge, or ThermoCube with centrifugal pump.Preferred coolant: Optimized for Koolance (27% propylene glycol/water mix); other fluids available upon request.Warranty: Comes with a 2-year warranty when used with SSCS chillers.ApplicationsThermoWrap is designed to meet the thermal control needs of a wide range of industries and research environments:Process chemicals: Ideal for maintaining precise temperatures in chemical canisters used in manufacturing and semiconductor processes like MOCVD.Bioprocessing: Supports temperature-sensitive biological workflows in pharmaceutical and biotech labs.Laboratory research: Ensures consistent thermal conditions for fluid samples, reagents, and experimental setups.Life sciences: Facilitates accurate temperature control for biological samples, buffers, and diagnostic fluids.Industrial fluid management: Suitable for bubblers and other liquid containers requiring stable thermal Environments.What's next?As laboratories and industrial facilities seek smarter, more sustainable solutions for temperature control, ThermoWrap stands out as a forward-thinking choice. Solid State Cooling Systems continues to push the boundaries of thermoelectric innovation, offering scalable, reliable, and energy-efficient products tailored to modern scientific needs.To learn more or request a quote, contact us and explore how ThermoWrap can elevate your thermal management strategy.

1.3 MP; Pixel Size 3.75x3.75 µm; Sensor Size 6.26x5.01 mm; Colour or B/W; 20-66 fps; Resolution 8, 12 bit; USB 2.0; Buffered; Progressive Scan; Board-level or Enclosed; Global Shutter Mightex’s C-Series compact USB 2.0 1.3 MP 1/3” CCD cameras with frame buffers are optimized for machine-vision applications, and they can be also used for a wide variety of applications (such as industrial inspections, digital microscopy and medical imaging) which require good quality cameras that are easy to use and cost-effective. C-Series compact 1/3” CCD cameras are available as colour or B/W versions, with 1.3 MP (1280x960) resolution and 8 or 12 bit, and can be ordered as “naked” board-level device or pre-mounted in an enclosure. Monochrome cameras often exhibit a 20% higher spatial resolution than their colour counterparts because no pixel interpolation is necessary. Without a Bayer colour filter on the sensor, monochrome cameras are also more sensitive than colour sensors, especially in near IR and UV regions. C-Series 1/3” CCD cameras have built-in frame buffers, global shutter, external trigger-in, strobe-out, and a powerful camera engine that supports multiple cameras. The frame rate can be as high as 20 fps in full resolution and up to 84 fps using ROI mode. A user-friendly GUI based application software and an SDK are provided for custom software development. In addition, a DirectShow driver and a TWAIN driver are available to easily link the cameras with users’ applications. A USB command set protocol and a Linux driver are also provided for non-Windows based applications. Available models are: CGN-C013-U: colour, board-level CGE-C013-U: colour, enclosed CGN-B013-U: B/W, board-level CGE-B013-U: B/W, enclosed Note: Board-level cameras are designed for OEM applications, when a system-level enclosure is usually provided. In order to avoid electro-static discharge (ESD) related damages, workforce handling a board-level camera should be properly grounded. ESD related damages are considered as mishandling and are not covered by product warranty. For lab use, it is strongly recommended to choose an enclosed camera instead of a board-level one. Key Features: Colour or Black&White (B/W, Monochrome) Built-in Frame Buffer 32 MByte (24 Frames at Full Resolution) Support Simultaneous Image Capturing From Multiple Cameras Higher Sensitivity Than CMOS Cameras B/W Cameras Feature Higher Sensitivity (Especially in Near IR and UV) Board-level or Enclosed Versions Available Ultra-compact Active Imaging Pixels: 1.3 MP, 1280x960 Pixel Size: 3.75 x 3.75 µm Sensor Size: 6.26 x 5.01 mm (1/3” Diagonal) 8 or 12 bit Progressive Scanning System Frame Rate: 20 to 66 fps Global Shutter 4-pin GPIOs Interface: High-speed USB 2.0 (480 Mbit/s), No Need for External Power Supply Digital Output, No Need for Frame Grabber Full-featured SDK DirectShow & TWAIN Drivers Linux Driver Available USB Command Set for Non-Windows-based Applications External and Software Trigger Strobe Output for External Flash ROI and Pixel Skipping OEM Versions Available Applications: Digital Microscopy; Machine Vision; Medical Imaging; Semiconductor Equipment; Test Instruments; Document Scanners; 2D Barcode Readers; Web Camera and Security Video; High-quality ID Photos

Cabinet Cooler - 20,4W Cooling Capacity - Heatpipe based – CC400F-24