Designed for Production Environment; Manual or Autofocus; Field of View 0.7 x 0.5 mm; Measurement Speed 0.5 s; Output USB 2.0; Connector Type LC, SC, SMA Data-Pixel’s 3D SCOPE-V2 series of interferometers for single-fiber connectors have been specifically designed for use in a production environment. These interferometers are robust, compact and easy to use tools that bring speed and precision to operators. 3D SCOPE-V2 interferometers are available in two versions with manual focus or autofocus. The 3D Scope-V2 interferometers support Data-Pixel’s BLINK software platform (included). Non-compressed, real-time and high-quality images are transferred from the hardware to the software via a USB 2.0 link in addition to the automation and control commands. 3D SCOPE-V2 interferometers are compatible with Data-Pixel’s SUPERVISOR software, a MES style software which is in charge of the execution, management and monitoring of the production in an assembly workshop for fiber optic connectors. Its role is to supervise machines and help operators with complete traceability of the manufacturing information. The 3D SCOPE-V2 interferometers are fully compliant with industry standards. Key Features: Measurement of PC and APC Connectors, Ferrules and Bare Fibers Lightning Speed Measurement Cycle (0.5 s) PASS/FAIL Result Visual Feedback Via Front Panel Start-button LED Color Integrated PC/APC Tilt Stage, no APEX Re-calibration Required True Phase-shifting Interferometers Vibration Insensitive Autofocus Option Compliance with Industry Standards for Interferometer Measurements Intuitive BLINK Software With Data-base Connectivity Measurement Report in HTML Format Compatible With Desktop PC, Laptop, Tablet PC Applications: Measuring End-face Geometry of Single-Fiber Connectors

Magnification x100 to x800; Field of View 0.3 x 0.3 mm to 3.3 x 2.7 mm; Focus Manually, Auto; Light Source Coaxial, Stray Light; Output Interface USB 2.0 Data-Pixel’s D SCOPE series of digital benchtop fiber microscopes for single-fiber connectors combines high-quality optics with a modern and ergonomic design ideally suited to fiber optic applications. Four variants of the D SCOPE series benchtop fiber microscopes are available with magnifications from x100 to x800. Until the D SCOPE, most microscopes were suffering from poor illumination quality yielding variable and non-reproducible image quality even amongst scopes of the same kind. With Data-Pixel’s BLINK software and an automated inspection plugin, the D SCOPE series microscopes are able to detect and measure automatically scratches and defects compatible with industry standards or customized parameters. D SCOPE series microscopes are compatible with Data-Pixel’s SUPERVISOR software, a MES style software which is in charge of the execution, management and monitoring of the production in an assembly workshop for fiber optic connectors. Its role is to supervise machines and help operators with complete traceability of the manufacturing information. Key Features: True Koehler Optical Design for Homogeneous Lighting Real-time Detection and Analysis of Surface Defects With Blink Software Independent Gain and Contrast Levels for Fiber and Ferrule Regions Adapters for All PC & APC Connectors High-speed USB 2.0 for Live Digital Image Deep Blue Long Life LED Light Source Second Stray-light Source for Surface Cleanliness Inspection (Optional) Ergonomic Fine Focus Control Automation Capabilities USB-powered – No External Power Supply Needed Compatible With Desktop PC, Laptop, Tablet PC Applications: Detect and Measure (Automatically) Scratches and Defects on PC & APC Connectors; Detection and Measurement Compatible With Industry Standards or Customized Parameters

Cost Effective; Magnification x50; Field of View 6.7 x 5.3 mm; Focus Manually; Light Source Stray Light; Output Interface USB 2.0 Data-Pixel’s D SCOPE EFI benchtop fiber microscope for MTP/MPO and multi-fiber field connectors is a cost-effective microscope for inspecting fiber optic patchcords. Easy to use, the D SCOPE EFI microscope allows the operator to check the cleanliness of the endface or the guide holes before any connection. All adapters accept both PC and APC connectors or ferrules. With Data-Pixel’s BLINK software, the D SCOPE EFI microscope is able to detect and measure scratches and defects compatible with industry standards or customized parameters. D SCOPE EFI microscopes are compatible with Data-Pixel’s SUPERVISOR software, a MES style software which is in charge of the execution, management and monitoring of the production in an assembly workshop for fiber optic connectors. Its role is to supervise machines and help operators with complete traceability of the manufacturing information. Key Features: Inspection of PC/APC, MTP/MPO Connectors, Field Connectors and MT Ferrules Real-time Full Connector Endface View High-resolution Optics Intuitive Blink Basic Edition Software Compatible With Desktop PC, Laptop, Tablet PC Applications: Inspecting Fiber Optic Patchcords With MTP/MPO and Multi-fiber Field Connectors

Fastest Microscope for MTP/MPO Connectors; Magnification x400; Defect Size Detection 0.5 µm; Autofocus; Output Interface USB 3.0, 2.0 Data-Pixel claims that its D SCOPE MT benchtop fiber microscope for multi-fiber MTP/MPO connectors is the fastest on the market. In one and the same measurement cycle, D Scope MT checks every optical fiber surface condition and allows the operator to control the cleanliness of the connector endface and guideholes. The fully automatic D SCOPE MT microscope is the ideal instrument for checking the conformity of multi-fiber connectors to industry standards. With very high measurement accuracy, D SCOPE MT has been designed for use in high-volume manufacturing environments or the most demanding laboratories. D SCOPE MT microscopes are compatible with Data-Pixel’s SUPERVISOR software, a MES style software which is in charge of the execution, management and monitoring of the production in an assembly workshop for fiber optic connectors. Its role is to supervise machines and help operators with complete traceability of the manufacturing information. Key Features: Testing of PC/APC Connectors and Ferrules From 1 to 64 Fibers Ultra-fast Measurement Time Automatic Pass/Fail Defect Analysis Automatic Focus Adjustment High Resolution Optics With Defect Size Detection of 0.5 μm Compliance With Industry Standards as IEC 61300-3-35 Real-time Full Connector Endface View Intuitive BLINK Software With Database Connectivity Compatible With Desktop PC, Laptop, Tablet PC USB-powered – No External Power Supply Needed Applications: Testing of PC/APC Connectors and Ferrules From 1 to 64 Fibers; Checking Optical Fiber Surface Conditions; Controlling the Cleanliness of the Connector Endface and Guideholes

Cost Effective; Magnification x400; Field of View 0.7 x 0.5 mm; Focus Manually, Auto; Light Source Coaxial, Stray Light; Output Interface USB 2.0 Data-Pixel’s D SCOPE PM benchtop fiber microscope for single-fiber connectors is dedicated to PANDA polarization maintaining (PM) fibers. It combines the high-quality inspection image of the D SCOPE microscope with low cost. The D SCOPE PM microscope is able to measure in real time the angular alignment of the stress elements relative to the connector key position. With Data-Pixel’s BLINK PM Aligner software, the D SCOPE PM microscope provides operators with an automated tool to control and measure PM fiber orientation inside connectors. D SCOPE PM microscopes are compatible with Data-Pixel’s SUPERVISOR software, a MES style software which is in charge of the execution, management and monitoring of the production in an assembly workshop for fiber optic connectors. Its role is to supervise machines and help operators with complete traceability of the manufacturing information. Key Features: Measures PANDA Style Fibers Magnification x 400 True Koehler Optical Design for Homogeneous Lighting Automated and Real-time Measurement Easy Calibration With BLINK PM Aligner High-speed USB 2.0 for Live Digital Image Field Stop Diaphragm Ergonomic Fine Focus Control USB-powered – No Outside Power Supply Needed Compatible With Desktop PC, Laptop, Tablet PC Applications: Measure the Angular Alignment of the Stress Elements in a PANDA PM Fiber Relative to the Connector Key Position in Real-time; Automated Control and Measurement of PM Fiber Orientation Inside Connectors

Cost Effective; Field of View 3.3 x 2.7, 5.6 x 3.0 mm; Measurement Speed <5 s (+ calcul.); Output USB 3.0, 2.0; Connector Type MT 12/24, MT 16/32 (Male, Female, Ferrule), MPO 12/24, MPO 16/32 With DAFFI MT, Data-Pixel has developed a series of cost effective interferometers for multi-fiber connectors, suitable for high volume production without compromising accuracy or performance. Two versions are available, supporting MT-12 (DAFFI MT12) or MT-16 (DAFFI MT16) multi-fiber connectors. Based on Data-Pixel’s extensive interferometer manufacturing experience, the supplier designed the DAFFI MT interferometers to be robust, fast and accurate in order to meet all requirements of manufacturing or laboratory environments. With Data-Pixel’s BLINK software platform (included), DAFFI MT interferometers are able to measure the end face geometry on multi-fiber connectors and ferrules. The DAFFI MT interferometer accessories (flange and adapters) are fully compatible with the DAFFI SF, DAISI V3, DAISI MT FP and DAISI MT-V3 interferometers, allowing the user to limit the costs of the 3D geometry measurement units. DAFFI MT interferometers are compatible with Data-Pixel’s SUPERVISOR software, a MES style software which is in charge of the execution, management and monitoring of the production in an assembly workshop for fiber optic connectors. Its role is to supervise machines and help operators with complete traceability of the manufacturing information. Key Features: Measures PC APC Connectors and Ferrules True Phase-shifting Interferometer Non-contact Measurement Smart Autofocus, Focus Only When Required Automatic Calibration of Reference Mirror Supports MT-16 and MT-12 (DAFFI MT16 or DAFFI MT12) Vibration Insensitive Easy and Fast Switching From PC to APC, no Change of Fiber Holder Required Compliance with Industry Standards for Interferometer Measurements Intuitive BLINK Software With Data-base Connectivity Compatible with Desktop PC, Laptop, Tablet PC Applications: Measuring End-face Geometry of Multi-Fiber Connectors

Cost Effective; Field of View 1.1 x 0.9 mm; Measurement Speed 1 s; Output USB 3.0, 2.0; Connector Type LC, MU, SC, FC, SMA, E2000 Data-Pixel’s DAFFI SF interferometer for single-fiber connectors is a cost effective solution for high volumes production, without compromising on accuracy or performance. Based on Data-Pixel’s extensive interferometer manufacturing experience, the supplier designed the DAFFI SF interferometer to be robust, fast and accurate in order to meet all requirements of manufacturing or laboratory environments. With the BLINK software platform, DAFFI SF interferometers are able to measure the end face geometry on single fiber connectors in a very short time. The DAFFI SF interferometer accessories (flange and adapters) are fully compatible with the DAFFI MT, DAISI V3, DAISI MT FP and DAISI MT-V3 interferometers, allowing the user to limit the costs of the 3D geometry measurement units. DAFFI SF interferometers are compatible with Data-Pixel’s SUPERVISOR software, a MES style software which is in charge of the execution, management and monitoring of the production in an assembly workshop for fiber optic connectors. Its role is to supervise machines and help operators with complete traceability of the manufacturing information. Key Features: Measurement of PC and APC Connectors, Ferrules and Bare fibers True Phase-shifting Interferometer Non-contact Measurement Smart Autofocus, Focus Only When Required Servo-controlled Reference Mirror for Automatic Apex Calibration Vibration Insensitive Easy and Fast Switching From PC to APC, no Change of Fiber Holder Required Compliance with Industry Standards for Interferometer Measurements Intuitive BLINK Software With Data-base Connectivity Compatible with Desktop PC, Laptop, Tablet PC Applications: Measuring End-face Geometry of Single-Fiber Connectors

Microscope (x 400) Included; Field of View 0.7 x 0.5 mm; Measurement Speed 1 s; Output USB 2.0; Connector Type LC, PC, MU, SC, FC, SMA, E2000 Data-Pixel’s DAISI MT FP interferometer for multi-fiber connectors combines the DAISI MT-V3 series interferometer with the new “Floating Pastille” fixture technology from Data-Pixel (patent pending). This major technological breakthrough for multi-fiber connector fixtures is perfectly suited for highly accurate X/Y endface angle measurements. With the Floating Pastille fixtures, measurement results are completely independent from the influence of the fiber optic cables and the operator. Floating Pastille is perfectly suitable for the inspection of connectors mounted with heavy cables. With the help of the Floating Pastille, the DAISI MT-V3 is now easier to operate, without compromising any of its existing features like accuracy of measurements, reproducibility, speed or robustness. No calibration is now required, as it is factory set, per fixture, by Data-Pixel. With Data-Pixel’s BLINK software (included), operators have the easiest way to produce customised control reports. The DAISI MT FP interferometer is compatible with Data-Pixel’s SUPERVISOR software, a MES style software which is in charge of the execution, management and monitoring of the production in an assembly workshop for fiber optic connectors. Its role is to supervise machines and help operators with complete traceability of the manufacturing information. Key Features: Combined White-Light and Red-Light Phase-shifting Interferometer for Precise Tip Radius and Core-dip Measurement Fast Autofocus That Simplifies Operator’s Handling Very High Accuracy and Reproducibility for Small X/Y Angles Measurements Suitable for Field Heavy Cables, Standard Small Cables MTP/MPO Connectors and Pigtails With MT Ferrules No Calibration Required Floating Pastille Flange is Compatible With Existing DAISI MT Units Closed-loop High Precision 30 µm Z-Scan Vibration Insensitive High Resolution Optics and Camera for a Better Resolution Large Field of View Able to Scan up to 96 Fibers Applications: Measuring End-face Geometry of Multi-Fiber Connector

Designed for Production and Field; Field of View 5.6 x 3.0 mm; Measurement Speed <5 s (MT12); Output USB 3.0, 2.0; Connector Type MT 12/24, MT 16/32 (Male, Female, Ferrule), MPO 12/24, MPO 16/32 Data-Pixel’s DAISI MT-V3 interferometer for multi-fiber connectors is the industry reference for MT product measurements, based on the same design philosophy that made the DAISI series of interferometers a success. The DAISI MT-V3 interferometer has been designed for use in production and field applications. Recently, the measurement speed has been largely optimized. Measurement plus calculation time is now better than 5 seconds for MT-12 based connectors. With Data-Pixel’s BLINK software platform, DAISI MT-V3 interferometers are able to measure end face geometry on single-fiber or multi-fiber connectors or ferrules. The BLINK software platform is the easiest way to produce customised control reports. DAISI MT-V3 interferometers are compatible with Data-Pixel’s SUPERVISOR software, a MES style software which is in charge of the execution, management and monitoring of the production in an assembly workshop for fiber optic connectors. Its role is to supervise machines and help operators with complete traceability of the manufacturing information. Key Features: Measurement of PC and APC Connectors, Ferrules Suitable for Multi-fiber (MT, MPO, MT-RJ,…) and Single-fiber (2.50mm, 1.25mm,…) True Phase-shifting Interferometer Non-contact Measurement Smart Autofocus, Only Focus When Required Automatic Calibration of Reference Mirror Supports MT-16 and MT-12 Based Connectors Vibration Insensitive Easy and Fast Switching From PC to APC, No Change of Fiber Holder Required Compliance With Industry Standards for Interferometer Measurements Intuitive BLINK Software With Data-base Connectivity Compatible with Desktop PC, Laptop, Tablet PC Applications: Measuring End-face Geometry of Multi-Fiber and Single-Fiber Connectors

Microscope (x 400) Included; Field of View 0.7 x 0.5 mm; Measurement Speed 1 s; Output USB 2.0; Connector Type LC, PC, MU, SC, FC, SMA, E2000 Data-Pixel’s DAISI V3 interferometer for single-fiber connectors provides the ultimate production solution for measuring end-face geometry on single-fiber connectors, equipped with a revolutionary “no-exterior-moving-parts” mechanical design. The unit combines a x400 microscope and an interferometer in order to control connectors after polishing in a very short time. With Data-Pixel’s BLINK software (included), operators have the easiest way to produce customised control reports. DAISI V3 interferometers are compatible with Data-Pixel’s SUPERVISOR software, a MES style software which is in charge of the execution, management and monitoring of the production in an assembly workshop for fiber optic connectors. Its role is to supervise machines and help operators with complete traceability of the manufacturing information. The DAISI-V3 interferometer is fully compatible with industry measurement standards. Key Features: Testing of PC/APC Connectors and Ferrules from 1 to 64 Fibers Ultra-fast Measurement Time Automatic Pass/Fail Defect Analysis Automatic Focus Adjustment High Resolution Optics With a Defect Size Detection of 0.5 μm Compliance with IEC Standards 61300-3-35 Real-time Full Connector Endface View Intuitive BLINK Software Compatible With Desktop PC, Laptop, Tablet PC Applications: Measuring End-face Geometry and Surface Inspection for Single-Fiber Connectors

Eccentricity Range 0 to 100 µm; Index Measurement 0° to 360°; Measurement Speed 10 s; Magnification x400; Ferrule Outside Diameter 1.00 to 3.17 mm Data-Pixel’s KONZENTRIK-V2 is a modular measurement system. Fiber or ferrule eccentricity measurements can be performed using different mechanical modules. KONZENTRIK-V2 CONNECTOR is dedicated to concentricity measurement of fiber core relative to ferrule envelope. The unit is able to measure the concentricity and indicate the angular value of maximum eccentricity. With the BLINK software platform, KONZENTRIK-V2 CONNECTOR is an easy to use measurement unit with database connectivity. KONZENTRIK-V2 CONNECTOR systems are compatible with Data-Pixel’s SUPERVISOR software, a MES style software which is in charge of the execution, management and monitoring of the production in an assembly workshop for fiber optic connectors. Its role is to supervise machines and help operators with complete traceability of the manufacturing information. Key Features: Measures Diameter 2.50 and 1.25 mm PC Type Connectors APC Connectors Option Available Ferrule End-face Visual Inspection at x400 Magnification Accurate and Repeatable Measurements User Adjustable Quality Level for High-speed Measurements Easy Calibration BLINK Concentricity Software Measurement Data Exported in Standard CSV Format Statistics on Measurements Available Measurement Report in HTML Format Compatible With Desktop PC, Laptop, Tablet PC Applications: Measurement of Connector Eccentricity; Concentricity Measurement of Fiber Core Relative to Ferrule Envelope; Indicate Angular Value of Maximum Eccentricity

Eccentricity Range 0 to 100 µm; Index Measurement 0° to 360°; Measurement Speed 3 s; Magnification x400; Ferrule Outside Diameter 1.00 to 3.17 mm Data-Pixel’s KONZENTRIK-V2 is a modular measurement system. Fiber or ferrule eccentricity measurements can be performed using different mechanical modules. KONZENTRIK-V2 FERRULE is dedicated to concentricity measurement of ferrule bore to ferrule envelope. The software indicates the maximum eccentricity angle when rotating the ferrule. With the BLINK software platform, KONZENTRIK-V2 FERRULE is an easy to use measurement unit with database connectivity. KONZENTRIK-V2 FERRULE systems are compatible with Data-Pixel’s SUPERVISOR software, a MES style software which is in charge of the execution, management and monitoring of the production in an assembly workshop for fiber optic connectors. Its role is to supervise machines and help operators with complete traceability of the manufacturing information. Key Features: Measures Ceramic and Metal PC-type Ferrule Automatic Measurement and Re-positioning of Ferrule at Tuned Position Ferrule End-face Visual Inspection at x400 Magnification Ferrule Envelope on Bare Ferrules & Bore Shape-error Measurement User Adjustable Quality Level for High-speed Measurements Easy Calibration BLINK Concentricity Software Measurement Data Exported in Standard CSV Format Statistics on Measurements Available Measurement Report in HTML Format Compatible With Desktop PC, Laptop, Tablet PC Applications: Measurement of Ferrule Eccentricity; Concentricity Measurement of Ferrule Bore to Ferrule Envelope

Precise Orientation of PM Fibers; Long Working Distance up to 65 mm; Automated and Real-time Measurement; USB-powered; Output Interface USB 2.0 Data-Pixel’s PM ALIGNER (polarization maintaining (PM) fiber aligner) is the simplest way to orientate precisely a PANDA polarization maintaining fiber inside a connector or ferrule. With a very long working distance, PM ALIGNER allows the operator to work manually around the ferrule of the connector. After positioning, the curing phase becomes easy to realize without affecting the PM fiber alignment. With Data-Pixel’s BLINK PM Alignment software, the PM ALIGNER will measure and display the angular alignment of the PM fiber’s stress elements in real time. PM ALIGNER systems are compatible with Data-Pixel’s SUPERVISOR software, a MES style software which is in charge of the execution, management and monitoring of the production in an assembly workshop for fiber optic connectors. Its role is to supervise machines and help operators with complete traceability of the manufacturing information. Key Features: Measures PANDA Style Fibers Exceptional Long Working Distance of 65 mm Automated and Real-time Measurement Easy Calibration With BLINK PM Alignment High-speed USB 2.0 for Live Digital Image Measurement Data Exported in Standard CSV File Database Connectivity USB-powered – No Outside Power Supply Needed Measurement Report in HTML Format Compatible With Desktop PC, Laptop, Tablet PC Applications: Precise Orientation of PANDA Polarization Maintaining Fiber Inside a Connector or Ferrule; Measurement and Display of Angular Alignment of Stress Elements in PM Fibers

MES-style Software for Use With Data-Pixel Systems; Data Collection & Acquisition, Staff Management; Resource Management; Mastery List; Product Traceability; Quality Management; Performance Analysis; Document Management Data-Pixel’s SUPERVISOR is a MES-style software which is in charge of the execution, management and monitoring of the production in an assembly workshop for fiber optic connectors. Its role is to supervise machines and help operators with complete traceability of the manufacturing information. SUPERVISOR’s aim is to monitor the assembly workshop to continuously improve the process in three phases: Measure, Analyze and Optimize. Interfaced with the measurement equipment, SUPERVISOR guides and reacts instantly to the activities of the production line. It is the central point of all the data, in charge of transmitting the right information at the right moment, both to the operator (pass / fail criteria, traceability, progress of the workorders) and to the machines (Start / stop, parameterization of machines, measurements). By capitalizing on all production data in real time, SUPERVISOR has an overview of the progress and performance of a workorder in real time, making it the ideal complementary tool for an ERP. Connected to an ERP software, SUPERVISOR collects the information related to the production order, then sets the equipment according to the products to be manufactured. Main Functions of SUPERVISOR: Data Collection and Acquisition: Allows the Input of All Information During Production, Manually Entered and Coming Automatically From Connected Equipment Staff Management: Manages the Necessary Skills and Authorizations for Users, Products and/or Operations Resource Management: Defines and Follows the Status of Each Resource (Production, Shutdown, Outage, Material Shortage …) Mastery List: Manages the Flow of Production Data Between the ERP and the Workshop Product Traceability: Associates a Part or Batch With All Its Manufacturing Data of the Components Quality Management: Masters the Quality of Manufacturing Processes – This Function Can Be Directly Integrated into the MES Software or Can Use SPC Software Performance Analysis: Consolidates Data to Calculate the Key Indicators of Production (First Pass Yield, Reworks, Efficiency, Performance …) Document Management: Makes Available to the Operator the Documents Necessary for the Realization of His Work Applications: Execution, Management and Monitoring of the Production in an Assembly Workshop for Fiber Optic Connectors