TCube Edge 4S (10-14072-4S-0-F2P3A7) TEC Chiller

Fiber Preparation Unit; Chemical-free; Strip Length 2-30 mm; Fiber Coating Diameter 80-1,000 µm; Fiber Type: Polyimide or Carbon Coated 3SAE Technologies’ FPU II Fiber Preparation Unit provides non-contact and chemical-free window or end face stripping of polyimide or carbon coated optical fibers in a small, affordable package. The FPU II window or end face stripping unit features 3SAE Technologies’ patented “Ring of Fire®” technology which surrounds the fiber with a uniform heat in controlled ionic conditions. This patented low temperature arc plasma process will window or end face strip polyimide and carbon coated fibers quickly and cleanly without use of any mechanical blades, acid or any other chemicals. The automated process provides consistent stripping results without requiring any special operator skills. The FPU II system is adaptable to your process and can accommodate fiber holders from the most common fusion splicer manufacturers. Strip lengths are adjustable and easily programmable. Tough polyimide or carbon coatings are difficult to remove without severely degrading the fiber’s mechanical integrity. Other polyimide stripping technologies use mechanical blades or rapid thermal decomposition, which produces low tensile strength while leaving the fiber dirty. A more commonly used method, strong acid/alkali chemistry, is hazardous and produces toxic waste. Utilizing 3SAE Technologies’ patented Ring of Fire® pulsed plasma etching technology, the FPU II window or end face stripping unit removes polyimide and carbon coatings safely and cleanly. The standard FPU II system accommodates a single fiber up to 1,000 μm diameter, with appropriate fixtures. The FPU II’s control interface is accessed via the mounted LCD and keypad. This interface provides operational status updates and provides the operator with advanced control of plasma characteristics, temperature and positioning. The operator can quickly and easily recall and store parameters in any one of up to eight available recipe locations. This allows quick translations between fiber stripping programs. Key Features: Chemical-free Fiber Stripping and Cleaning Variable Strip Lengths: 2 to 30 mm Compact Bench-top Design Supports Fiber Holders From Fitel, Fujikura and 3SAE Technologies Software-adjustable Parameters Power Supply: 100 to 240 VAC Supported Fiber Types: 80 to 1000 μm Polyimide or Carbon Coated Dimensions: 190 x 200 x 140 mm Application: Non-contact, Chemical-free Window or End Face Stripping of Tough Polyimide or Carbon Coatings From up to 1,000 µm Diameter Optical Fibers

290 W @ 20°C; >2 lpm @ 14 psig; 1/4 Valved CPC Fittings; Centrifugal Pump; Stainless Steel This thermoelectric recirculating chiller is a low-cost, high-performance device optimized for lasers, optics and life sciences. It features precise temperature control (±0.05°C repeatability), long-life reliability, quiet operation and environmental friendliness in a compact size. Using universal power, the TEC chiller is very energy efficient only drawing power when required.

230W @ 20°C; >2 lpm @ 14 psig; 1/4" valved CPC Fittings; Centrifugal Pump; Aluminium and Polymers This thermoelectric recirculating chiller is a low-cost, high-performance device optimized for lasers, optics and life sciences. It features precise temperature control (±0.05°C repeatability), long-life reliability, quiet operation and environmental friendliness in a compact size. Using universal power, the TEC chiller is very energy efficient only drawing power when required.

Cooling Capacity 1-15 kW @+20 °C; Process Fluid Flow Rate 3-30 lpm @≤8.5 bar; 3/8”, 1/2”, 3/4”, 1” Fittings; Temperature Stability ±0.1-±0.5 K Termotek’s P800 series of stand-alone cooling units for optimum ratio of dimensions and performance are used wherever there is a need for precise cooling and the need to avoid integrating the refrigeration unit in a separate machine housing. High performance in a space-saving, mobile housing – this has proved to be a tried-and-trusted combination over many years in all fields of laser cooling, including optical assemblies, in laboratories, in the printing industry and on machine tools and for HSC milling. The practical arrangement of all the components in the compact housing means not only low maintenance requirements but low vibrations and noise emissions too. The P800 recirculating chillers are available for power ranges from 1 to 15 kW. P800 chillers provide active cooling and therefore contain a refrigeration circuit with a compressor and a heat exchanger for a variety of media. Both the refrigeration circuit and the cold water temperature are monitored and controlled by a central control system. The cold water is reliably fed to where it is required by a pump. An optional particle filter in the cold water outlet keeps the circuit clean, and a flow sensor for the return flow guarantees the required stable operation. The waste heat is either emitted to the environment via speed-controlled fans or transferred to a central water circuit via heat exchangers, so that the waste heat can be used, for example, for preheating the process water. Key Features: Compact, Stand-alone Enclosure Compact and Flexible in Terms of Installation Small Footprint - Excellent Cooling Power to Size Ratio Extremely High Level of Temperature Stability: ±0.1 to ±0.5 K Reliable Operation Low Noise and Vibration Levels Low Maintenance Requirements Small Water Tank Cooling Capacity 1 to 15 kW Flow Rate: 3 to 30 l/min and More on Demand Designed for Water With Additions or De-ionized Water Alarm Dry Contacts via 9-pole Sub-D on Rear Panel Water Level Display Speed-controlled Fan RS232 Interface Remote Start Via 24 VDC Signal 50/60 Hz Design Refrigerant: R134a Applications: Cooling of Lasers (CO2, Passively Cooled Lasers, Fiber Lasers); Cooling of Medical and Laboratory Equipment; Printing Industry; HSC Spindles; Tooling Machines; Laboratories; Optical Assemblies