AT3862P 100g Adhesives and Sealants

Refractive Index 1.44; 45-60 cps Viscosity at 25°C Norland Optical Adhesive 144 is clear liquid adhesive that will cure when exposed long wavelength ultraviolet light. NOA 144 is recommended for bonding glass to glass. Adhesion is also good to cellulose acetate butyrate. NOA 144 is cured by ultraviolet light between 315 and 395 nm. Peak absorption is 365nm. Full cure requires 6 Joules/cm2. The adhesive exhibits oxygen inhibition and must be cured under an inert atmosphere if used as a coating to assure surface is tack free.Typical Properties of NOA 144 Shore D Hardness 65 Color Clear  Keep NOA 144 in a cool (5-22°C) dark place. If refrigerated, allow the adhesive to come to room temperature before using.

Adhesive;High Precision;Epoxy;10g

NEOCLEAN;Stick;Single-Core;MU;LC

Refractive Index 1.458-1.567; Viscosity 145-2,000 mPas; Optical Transmittance (@1 mm, 1.3 µm) 82%-94%; Bond Strength 99->247 kgf/cm²; UV Curing Conditions 10, 30 mW/cm², 5, 10 minYou are looking for PLC and fiber array adhesion with high reliability? Try NTT Advanced Technology Corporation’s series of adhesives for optical waveguides!Within this series you find acrylate-based adhesives (AT6001, AT8224)with excellent durability that have cleared a large number of reliability tests. Epoxy adhesives are also part of this series, with a refractive index that can be accurately controlled within a range of 1.456 to 1.567 (±0.005, Na-D) – or with a fixed refractive index that is the same as quartz to deliver low reflectance (GA700L, GA700H).UV curing of the adhesives for optical waveguides allows for adhesion in a short time frame and makes alignment easy. The adhesives withstand a solder reflow process for Si Photonics (+260 °C).In order to achieve high reliability, a product must clear the tests conducted by the users themselves. If you have had even just a bit of dissatisfaction in reliability test results in the past, please put NTT Advanced Technology Corporation’s adhesives for optical waveguides to the test.In case you need any consulting regarding issues related to adhesion, please contact the AMS Technologies optical adhesives experts to discuss the detailed challenges of your application.Key Features:Optical Adhesive Used for PLC to Fiber Link-upPrecision Refraction Index of 1.458 to 1.567 (±0.005, Na-D) Provides ControllabilityUltraviolet (UV) Curing Conditions: 10, 30 mW/cm², 5, 10 minVery Little Adhesion Loss Due to Heat or Moisture, Providing High DurabilityViscosity: 145 to 2,000 mPasOptical Transmittance: 82% to 94% (@1 mm Thickness, Wavelength 1.3 µm)Bond Strength: 99 to >247 kgf/cm²Applications: Gluing of Optical Waveguides; PLC to Fiber Link-up; Silicon Waveguide to Fiber Link-up