neoMOS High Power 1030 1064 nm Lasers

Product number: SW11991

Manufacturer: neoLASE

Downloads

Product information "neoMOS High Power 1030 1064 nm Lasers"

Pulse duration <100 fs – 70 ps; Output power levels 15 W – 100W; Pulse Energy ≤ 250 µJ – 500 µJ; Repetition rates single shot to 80 MHz; Beam quality TEM0,0 / M2 < 1.3

The neoMOS ultrashort pulse laser series combines the reliability and low maintenance of state of the art fiber oscillators with a solid-state amplifier. The ultra-compact laser head has the smallest footprint currently available and enable easy system integration. High stability and long lifetime are provided by design for 24/7 industrial use. The multi-megawatt level peak-power and ultrafast pulses delivered by the neoMOS series are suitable for processing the most demanding materials including transparent glasses and plastics. Typical applications include photovoltaic and electronics production, display glass processing as well as security and decorative marking.

The neoMOS laser is available with 10 ps and 70 ps pulse duration as well as the neoMOS SMAART, which combines pico- and femtosecond laser pulses within one compact laser system. The system is based on high reliable and low maintenance fiber oscillators and robust solid-state amplifiers. The new developed laser system further expands the neoMOS pulse duration range into the area of less than 900 fs up to a few ten picoseconds or even nanoseconds. With the short-pulse option the neoMOS SMAART can offer pulse duration down to 100 fs.

Key features neoMOS 10ps

Pulse durations <10 ps
Output power levels ≤ 50 W
Pulse energy ≤ 250 µJ
Repetition rates single shot to 40 MHz
Beam quality: TEM0,0 / M < 1.3

Key features neoMOS 70ps

Pulse durations 70 ps
Output power levels 15 W
Pulse energy ≤ 250 µJ
Repetition rates single shot to 80 MHz
FlexPulse Technologie
Beam quality: TEM0,0 / M2 < 1.3

Key features neoMOS SMAART

Pulse durations 40 ps / 900 fs
Output power levels 100 / 75 W
Pulse energy ≤ 500 / 400 µJ
Repetition rate 200 kHz – 2 MHz
TEM0,0 Beam quality, M2 < 1.3

Key features neoMOS SMAART with Short Pulse Option

Pulse durations <100 fs
Output power > 50 W
Pulse energy > 150 µJ

Applications: Photovoltaic and electronics production, display glass processing, security and decorative marking

Manufacturer "neoLASE"

neoLASE (an AMS Technologies company) is an innovative laser manufacturer providing industrial and scientific solutions from continuous wave down to femtosecond pulse durations. neoLASE was founded in 2007 as a start-up company from the laser development department of the Laser Zentrum Hannover e.V.. With long-term experience in the field of diode-pumped solid-state lasers, neoLASE offers a high degree of qualification and competence in developing customized laser solutions.

Customers also viewed

Andarta

The Andarta sensor by Singular Photonics represents a breakthrough in SPAD (Single Photon Avalanche Diode) imaging technology, designed to meet the demanding requirements of modern research and industrial applications. Developed with a focus on flexibility, precision, and scalability, Andarta integrates advanced photon processing capabilities directly into a compact 5mm x 5mm form factor. This sensor is engineered to perform a wide range of imaging tasks, from ultra-high-speed imaging to correlation spectroscopy, making it a versatile tool for scientists and engineers working at the forefront of photonics.Leveraging noiseless performance and highly accurate photon timing, Andarta enables users to extract rich spatial and temporal data from light, even under low-light conditions. Its reprogrammable architecture and support for multiple operational modes allow for tailored imaging workflows, enhancing productivity and enabling new experimental possibilities.Key FeaturesNoiseless Performance: Andarta’s SPAD architecture ensures ultra-low noise levels, enabling precise photon detection even in challenging environments.High Sensitivity in Compact Form: Measuring just 5mm x 5mm, Andarta delivers exceptional sensitivity in a miniature package, ideal for integration into portable and wearable devices.Advanced Photon Processing: Features such as in-pixel histograms and on-chip preprocessing allow for real-time data analysis and reduced post-processing overhead.Multi-Mode Operation: Supports autocorrelation measurements, gated mode, and ultra-high-speed imaging, offering flexibility across diverse imaging scenarios.Reprogrammable Architecture: Users can adapt the sensor’s functionality to specific tasks, enhancing experimental control and scalability.Ideal for Correlation Spectroscopy: Optimized for time-resolved measurements, Andarta is particularly suited for applications requiring precise temporal resolution.Technical SpecificationsFeature SpecificationSensor Type SPAD (Single Photon Avalanche Diode)Form Factor 5mm x 5mmOperational Modes Autocorrelation, Gated Mode, Ultra High-Speed ImagingData Processing In-pixel histograms, On-chip preprocessingReprogrammability YesApplication Focus Correlation Spectroscopy, Wearables, Health ImagingApplicationsAndarta is engineered for use in a wide range of scientific and industrial domains:Biomedical Imaging: High sensitivity and compact size make it ideal for wearable health monitoring and diagnostic devices.Spectroscopy: Time-resolved and autocorrelation capabilities support advanced spectroscopic analysis.Photonics Research: Enables precise photon timing and spatial-temporal imaging for quantum optics and photonics experiments.Industrial Inspection: Suitable for high-speed imaging in automated quality control systems.What's Next?Singular Photonics continues to innovate in SPAD sensor technology, with future developments aimed at expanding pixel arrays, enhancing multispectral capabilities, and integrating AI-driven photon analysis. Researchers and developers are encouraged to explore Andarta’s capabilities and collaborate with Singular Photonics to push the boundaries of what’s possible in photon-based sensing.

Product number: SW12026

Manufacturer:

17OPO-1-50 S MID-IR (1700 nm) Tunable OPO Source

1700-1750 nm; Output Energy ≤50 µJ; Repetition Rate ≤10 kHz; Pulse Width 2-5 ns; Pump Laser and OPO in Single Rugged Housing Our 170P0-1-50-S MID-IR tunable OPO (optical parametric oscillator) source combines pump laser and OPO in a single, rugged housing and generates laser pulses in the mid-infrared (MID-IR) range around 1700 nm – the applications for such wavelengths are mainly in the field of photoacoustic imaging, in addition to gas chromatography and other analysis tasks. The OPO’s wavelength can be tuned in an extended range from 1700 nm to 1750 nm. Other wavelength ranges (e.g. 1500 nm to 2000 nm) are available on demand. Using an electro-optical Q-switch, very short pulses with typical pulse widths of 2 ns to 5 ns are generated. If different wavelengths, repetition rates, pulse energies or pulse widths is what you are looking for, the laser experts at Elforlight (an AMS Company) are happy to specify, design and manufacture your customized OPO solution. Get in touch with us now to discuss your project’s requirements! Key Features: Tunable Wavelength Range: 1700 nm to 1750 nm (1500 nm to 2000 nm on request) Ideal for Cardiovascular Photoacoustic Imaging Pump Laser and OPO in Single Rugged Housing Operation Mode: Pulsed Pulse Width: 2 ns to 5 ns Pulse Repetition Rate: Up to 10 kHz Pulse Energy: 50 µJ @1 kHz, 30 µJ @5 kHz Beam Quality: Close to TEM00, M2 < 1.3. (Capable of Launch into Multimode Optical Fiber) Beam Profile: Circular Triggering: External Laser Pulse Trigger Option (Input Trigger Signal 5 V) Control: RS232 Interface With: Switch Laser On/Off, Set Laser Energy, Enable/Disable Emission Power Supply: 110 VAC to 240 VAC, 50/60 Hz, ~200 W Safety Features: Redundant Interlock, Warning Outputs Applications: Biomedical Photoacoustic Imaging; Gas Chromatography; Other

Product number: SW11772

Manufacturer: