neoVAN 1064 nm Laser Amplifier

Customized, Turnkey Solutions for Optical Technologies Systems; Full Service From Concept to Serial Production With its "Optical Rack" concept, AMS Technologies offers the development and production of customized optical systems and subsystems in a convenient, modular rack format. The spectrum ranges from the combination and integration of optical and fiberoptic components to the installation of lasers and beam delivery up to the creation of complex control and evaluation electronics (hardware and software) as well as extensive thermal management concepts. Concept: Review of Customer Application; Discussion of Target ParametersRight at the beginning of a project, AMS Technologies can support the concept design by reviewing the customer's application and discussing the target parameters. Schematics: Selection of Key Components; Review of Engineering Needs; Development of SOW, Quotation & OrderOur team of optics experts then creates block diagrams and other schematics, selects suitable key components and takes into account all engineering needs, even beyond system integration. BOM Creation: Development of Bill of Material; Development & Design of Customized Components & Subassemblies; Documentation and Revision Control of DesignOnce the statement of work has been finalized, we generate a Bill of Material (BOM), define and develop custom components and sub-assemblies and manage design documentation and revision control. Drawings: Physical Layout of System-level Designs; Simulation & Modeling of System-level Designs; Systems Integration; Realization of Entire Design Projects; Review With CustomerUsing modern design and CAD software, the specialists in the AMS Technologies team then produces the physical layout of the design at system level, including simulation and modelling – the whole process is strictly customer centric with a close involvement of the customer in the entire process. Turnkey Solution: Supply Chain Management for All Components; Assembly & Test of Optical Rack; Installation, Documentation & Training; Maintenance & Service OptionsOnce the final design has been approved, the optical rack is assembled and tested and, if necessary, installed in the customer's system. For series production in small to medium quantities, we take care of the supply chain management for all components, generate comprehensive documentation and offer training, maintenance and service options. We are happy to realize an optical rack that covers your specific requirements and is optimally tailored to your application. Get in touch with our optical technologies experts and discuss your customized optical rack today!

Output power 5 – 50 W; Pulse duration 1 ns – 5 ps; Pulse energy ≤ 1 mJ; Mode of operation single shot to MHz repetition rates; Beam quality TEM0,0 / M²<1.3 The neoVAN 1064 nm Laser Amplifier with Pulse Picker allow customers to combines the reliability and low maintenance of the neoVAN solid-state amplifiers with fiber coupled seed oscillators. Customized combinations are integrated into ultra-compact laser heads enabling easy system integration. High stability and long lifetime are provided by the neoLASE amplifier design for 24/7 industrial use. neoLASE developed a customized MOPA solution with integrated pump diodes specialy designed for OEM customers. The module type technology allows self-service and therefore dramatically increases system up time and duty cycle. The platform allows new system integration possibilities for short pulse laser applications. Key features: Output power: 5 – 50 WPulse duration: 1 ns – 5 psPulse energy: ≤ 1 mJMode of operation: single shot to MHz repetition ratesBeam quality: TEM0,0 / M²<1.3 Applications: Mode-locked fiber oscillators; short-pulse laser applications

Viscosity 70->20,000 mPas; Shear Bond Strength > 69->200 kgf/cm²; Bending Adhesion Strength 9-25 kgf/cm²; UV Curing Conditions 10-100 mW/cm², 5, 10 min; Colour Light Yellow, Colourless, White; Tg +42-+219 °C NTT-AT’s series of adhesives for fiber array assemblies feature high moisture resistance and excellent workability for v-groove fixing or optical fiber fixing. Fiber arrays are used for the input and output of optical waveguide devices. NTT-AT’s AT3925M, AT9390, AT9968, AT3727E and AT3728E epoxy-based optical adhesives are used for fixing the v-grooves and have realized price reductions while enhancing moisture resistance compared to conventional products. These adhesives can be polished after assembly. NTT-AT’s AT9575M (epoxy) and AT8105 (acrylate) adhesives for optical fiber fixing have gained popularity for their good workability as non-fluid adhesives. NTT-AT has executed durability tests that have shown no peeling of a fiber array after 2,000 hours at +85 °C and 85% of humidity. With viscosities that are appropriate for the usage location, the adhesives for fiber array assemblies are easy to use. While the adhesives for fixing v-grooves show fluidity, the optical fiber fixing adhesives’ consistency is that of a paste, suitable for protecting the fiber. In case you need any consulting regarding issues related to adhesion, please contact the AMS Technologies optical adhesives experts to discuss the detailed challenges of your application. Key Features: Excellent Durability Just the Right Viscosity for Easy Application: Non-liquid Viscosity for Fiber Fixation, Low Viscosity Fluid for Fiber Fixation into V-Type Groove Heat-proof: Maximum Glass Transition Temperature Tg of Over +200 °C (AT3925M) Viscosity: 70 to >20,000 mPas Shear Bond Strength: > 69 to >200 kgf/cm² Bending Adhesion Strength: 9 to 25 kgf/cm² UV Curing Conditions: 10 to 100 mW/cm², 5, 10 min Colour (Pre-Curing): Light Yellow, Colourless, White Glass Transition Temperature Tg: +42 to +219 °C Applications: Gluing of Fiber Array Assemblies; V-Groove Fixing; Optical Fiber Fixing

304.8 mm x 95.3 mm, 0.004 °C/W, tubed cold plate.Components can be mounted on both sides of CP15™, making this compact and lightweight cold plate ideal for applications where heat loads are moderating and space is at a premium. The tubes of the CP15™ cold plates are coplanar with the plate to allow for dual-sided mounting. The cold plate's tube side offers higher performance as the copper tubes are in direct contact with the component being cooled. Our range of standard tubed cold plates provide cost-effective thermal solutions for component cooling applications where the heat load is low-to-moderate. These tubed cold plates consist of copper tubes pressed into a channeled aluminum extrusion. This “Press-Lock” technology eliminates the need for performance-limiting epoxy between the tube and the plate, resulting in superior thermal performance. Each tubed cold plate has a single tube with no joint, ensuring leak-free operation.

Refractive Index 1.315; 15 cps Viscosity at 25°C Norland Optical Adhesive 1315 (2g syringe) is clear liquid adhesive that will cure when exposed long wavelength ultraviolet light. NOA 1315 is recommended for bonding for glass to glass. Adhesion is also good to cellulose acetate butyrate. NOA 1315 is cured by ultraviolet light between 320 to 450 nm. Full cure requires 6 Joules/cm 2. The adhesive exhibits oxygen inhibition when used exposed to air. To overcome this the adhesive must be cured under an inert atmosphere, such as nitrogen. When used as a coating the liquid adhesive's temperature must be kept below 9C to prevent vaporization.Typical Properties of NOA 1315 Temperature Range -15°C to 90°C   Keep NOA 1315 in a cool ( 5 to 20°C) dark place. If refrigerated, allow the adhesive to come to room temperature before using.