WCB312 QCL Power Supply Wiring Kit

€101.58*

Content: 1 pcs

Prices excl. VAT plus shipping costs

Only 2 available

Available, delivery time: 1-2 days

Product number: C009455-1

Manufacturer: Wavelength Electronics

Available stock: 2

Downloads

Product information "WCB312 QCL Power Supply Wiring Kit"

The WCB312 wiring kit is used with following power supplies from Wavelength Electronics: PWRPAK-24V. The WCB312 kit simplifies wiring of the PWRPAK-24V switching power supplies for use with the QCL family of Quantum Cascade laser diode drivers: QCL500 OEM, QCL500 OEM(+), QCL1000 OEM, QCL1000 OEM(+), QCL1500 OEM, QCL1500 OEM(+), QCL2000 OEM or QCL2000 OEM(+).

This kit contains:

AC: 2 twisted pair black & white 14 ga 24" wires (blk is intended for line, white for neutral)
Qty 6, 14 ga ring terminals to attach the AC wires to the PWRPAK-24V screw terminals
AC Safety ground #1: 22 ga green wire, 10" with ring terminals on both ends - connect two FG terminals
AC Safety ground #2: 22 ga green wire, 10" with one ring terminal - connect FG to AC chassis ground
Common Ground: 24 ga black wire, 10€ with ring terminals on both ends - connect between -V of positive supply and +V of negative supply
Qty 3, 24 ga ring terminals to attach to the wires from the 3-pin power cable (V+, POWER GROUND, V-) [ WCB311 is 20 pin connector with cables]

Manufacturer "Wavelength Electronics"

Similar products

5R6-576 Digital Display for 5R7-001/5R7-002 TEC Temperature Controller

Accessory for TEC Temperature Controller; Display; 4-digit The 5R6-576 display is a 4-digit display for the 5R7-001/5R7-002 TEC temperature controller. The display features a minimum temperature display resolution of 0.1°. Using the switches on the display, the set point of the TEC temperature controller may be changed. There are two LED’s which indicate whether the readout is showing control temperature or set temperature. For instance, if the temperature is over 100° the readout will have a resolution of 0.1. Specifications: Temperature Readout: 4 Digit-Display Temperature Resolution: 0.01° Display Switches: Increasing the set point Decreasing the set point To choose whether to display the set temperature or the control temperature

Product number: C008977-6

Manufacturer:

€224.33*

5R7-551 Digital Display for 5R7-570 TEC Temperature Controller

Accessory for TEC Temperature Controller; Display Specifications: Temperature Readout: 4 Digit-Display Temperature Resolution: 0.01° Display Switches: Increasing the set point Decreasing the set point To choose whether to display the set temperature or the control temperature

Product number: C008983-1

Manufacturer:

€134.49*

5R7-584 Digital Display for 5R7-582 TEC Temperature Controller

Accessory for TEC Temperature Controller; Display; 4-digit; for 5R7-582 The 5R7-584 display is a 4-digit display for the 5R7-582 TEC temperature controller. The display features a minimum temperature display resolution of 0.1°. Using the switches on the display, the set point of the TEC temperature controller may be changed. There are two LED’s which indicate whether the readout is showing control temperature or set temperature. For instance, if the temperature is over 100° the readout will have a resolution of 0.1. Specifications: Temperature Readout: 4 Digit-Display Temperature Resolution: 0.01° Display Switches: Increasing the set point Decreasing the set point To choose whether to display the set temperature or the control temperature

Product number: C019404-6

Manufacturer:

€254.88*

Butterfly mount for MW-PK-0090-02 Laser Diode Driver

User interchangeable mount for using the cLDD base unit with butterfly type devices, including adapter boards for Type 1, Type 2 and custom pin-out routing (mount only).

Product number: C019427-6

Manufacturer:

€134.00*

Cables for Laser Diode Drivers and TEC Drivers

Connect Laser Diode Drivers and TEC Drivers With Loads, Power Supplies or Other Instrumentation; Unterminated or Pre-Confectioned With USB, SMA, BNC, DB, Teflon, Ring or Other Connector An extensive range of cables for Wavelength Electronics‘ laser diode drivers, quantum cascade laser drivers and temperature controllers is available. The spectrum reaches from simple USB, BNC or SMA cables to cables with DB or other connectors, one or both sides unterminated, all the way to sophisticated cable and connector assemblies and connector kits. These cables can be used to connect the Wavelength Electronics driver series with the power supply, the load, a computer or other instrumentation. More information can be found in the datasheet of the different series. Please contact AMS Technologies for more information. Free, effective and responsive technical support is available to simplify integration of Wavelength products into your OEM design. Standard products can be easily modified to meet your application requirements. Get in touch with the AMS Technologies experts to discuss your customized solution!

Product number: SW10845

Manufacturer:

DIL mount for MW-PK-0090-02 Laser Diode Driver

User interchangeable mount for using the cLDD base unit with DIL type devices (mount only).

Product number: C019425-6

Manufacturer:

€134.00*

Only 3 available

DISP-573 Digital Display for 5R-573 TEC Temperature Controller

Accessory for TEC Temperature Controller; DisplayThe DISP-573 display is a 4-digit display for the 5R-573 TEC temperature controller. The display features a minimum temperature display resolution of 0.1°. Using the switches on the display, the set point of the TEC temperature controller may be changed. There are two LED’s which indicate whether the readout is showing control temperature or set temperature. For instance, if the temperature is over 100° the readout will have a resolution of 0.1. Specifications: Temperature Readout: 4 Digit-Display Temperature Resolution: 0.01° Display Switches: Increasing the set point Decreasing the set point To choose whether to display the set temperature or the control temperature

Product number: C009011-1

Manufacturer:

€127.03*