ThermoCube II Liquid-to-Liquid Recirculating Chiller

Compact Vapor Compression Chillers; Cooling Capacity 450-1000 W @+25°C; Single and Twin Versions; 1 to 5.5 l/min; Temperature Stability ≥±0.05K; Interface USB/Serial, Ethernet AMS Technologies’ mRC-KITs are “mini Recirculating Chiller” development kits for creating particularly compact compressor-based water cooling systems. All mRC-KIT versions feature vapor compression circuits and closed, pressurized recirculating water circuits. On the refrigeration side, miniature rotary compressors as well as customized condensers and evaporators are utilized to reduce the size. The compressor’s BLDC motor is speed controlled by an inverter, eliminating annoying switching noise of hot gas bypass known from ON/OFF compressors. Throughout its speed range, the compressor twin pump design offers low vibration and low noise. Compact centrifugal pumps on the water circuit side also contribute to the compact size Since the water circuit is pressurized, the mRC-KITs manage with very small tanks – without the risk of cavitation in the smoothly operating centrifugal pumps. Overpressure on the cooling system also prevents the ingress of bacteria and oxygen and thus extends the maintenance intervals. While mRC-C-450-24-KIT and mRC-C-450-100/240 feature full chiller power and up to 450 W cooling capacity in a shoe box form factor, DmRC-C-900-100/240-KIT provides two independent water cooling systems in a 19-inch rackmount insert, which can provide a combined maximum cooling capacity of 900 W – either with each circuit cooling two heat loads independently of each other or with both circuits coupled in series, if only one circuit is needed. Our mRC-KITs are available either with a 24 VDC or with a 90 to 264 VAC wide-input-range power supply. The mRC-C-1000-100/240 can also be shipped as a 24V option to target OEM integration applications, that need a cooling capacity of around 1000W and where noise and vibrations are an issue. Automatic fill and drain: Using automatic air and water pump technology integrated into the unit, the cooling water in the tank and pipe system of the mRC-KITs can be easily filled and drained at the push of a button – without the need for time-consuming tilting or removing the unit or the tank from the system and avoiding annoying spills or leaks. mRC Recirculating ChillersIn addition to our mRC-KITs, AMS Technologies provides two recirculating chillers that are CE certified and available from stock. mRC-C-450-100/240 provides up to 500 W cooling capacity, while mRC-C-1000-100/240 features a more powerful compressor, capable of cooling capacities up to 1000 W. Both systems come with an integrated 90 to 264 VAC wide-input-range power supply.  IoT ready: An integrated Ethernet interface allows access to system parameters of the mRC recirculating chillers as well as remote control of the cooling systems via a web browser. Your customized mRC-KIT: For customer requirements that cannot be covered by mRC-C-450-24-KIT, mRC-C-450-100/240 or DmRC-C-900-100/240-KIT, our thermal management specialists at AMS Technologies are happy to develop a completely tailor-made solution and offer all services from development and proof-of-concept all the way to series production. Contact us now to discuss your customized mRC-KIT! Key Features: Recirculating Water Chilling Kits Ideal for Water Cooling Tasks up to 1000 W Cooling Capacity (Twater +25°C, Tambient +35°C) High Cooling Capacity in Compact Format, Easy to be Integrated in Customer Application 24 VDC and 100 to 240 VAC Derivatives Available Temperature Stability: Down to ±0.05 K Flow Rate: 0.5 bar @ 5.5 lpm (standard), 5 bar @ 5 lpm (optional) Smooth, Low-noise Operation with Low Vibration Automatic Fill & Drain PID Parameters and Fan Speed Adjustable Interfaces: USB/Serial, Ethernet (IoT Enabled) Applications: Water Cooling of Lasers and Other Applications; Integration of Water Cooling Capabilities up to 1000 W in Systems with Limited Space

The ThermoCube II 650 is the newest addition to Solid State Cooling Systems’ renowned ThermoCube line, delivering enhanced thermal performance in a compact, energy-efficient design. With 650 watts of cooling capacity and ±0.05°C temperature stability, this benchtop thermoelectric chiller is engineered for precision, reliability, and versatility across a wide range of scientific and industrial applications.Built on the proven architecture of the ThermoCube II series, the 650 model introduces a redesigned power subsystem, a more powerful controller, and expanded software capabilities. It offers 30% more cooling capacity than previous models while maintaining the same height and width, making it a plug-and-play upgrade for existing setups. With over 35,000 ThermoCube units sold globally, the ThermoCube II 650 continues the legacy of world-class reliability and ease of use.Key featuresHigh-capacity cooling: Provides 650 watts of cooling at 20°C ambient with an aluminum cold plate, ideal for demanding thermal control tasks.Exceptional precision: Maintains temperature stability within ±0.05°C at constant load, ensuring consistent performance.Compact footprint: Measures just 11” x 14.5” x 13” (28 x 37 x 33 cm), fitting easily into benchtop environments.Quiet operation: Operates at <50 dBA at 50% load and <63 dBA at full load, minimizing noise in sensitive settings.Flexible pump options: Supports centrifugal and gear pumps, including a new high-performance 5 lpm (5G) gear pump.Versatile fittings: Compatible with 1/4” or 3/8” (0.6 cm or 0.3 cm) fittings including John Guest, CPC, APC, swage, or FNPT.Advanced connectivity: Offers RS232, RS485, Ethernet, and TTL communication protocols for seamless integration.Smart features: Includes variable speed fan and auto-restart as standard, plus alarms for temperature, fluid level, and system failures.Wide operating range: Standard range of 5°C to 50°C, with optional extensions down to -5°C (LT) and up to 65°C (HT).Durable construction: Wetted materials include aluminum, copper, or stainless steel, with a 300 ml tank and level sensor.Universal power input: Operates on 100–240 VAC, 50/60 Hz, suitable for global deployment.Certified and safe: TUV listed to UL, CAN/CSA, EN 61010-1, CE 61010-1, and RoHS compliant.Warranty: Backed by a 2-year warranty for peace of mind.ApplicationsThe ThermoCube II 650 is ideal for a broad spectrum of temperature-sensitive environments:Laboratory research: Supports precise thermal control for experiments, sample preservation, and analytical instruments.Bioprocessing: Maintains stable conditions for biological reactions, fermentation, and fluid handling.Semiconductor manufacturing: Enables accurate cooling for MOCVD, etching, and deposition processes.Medical and life sciences: Regulates temperature for diagnostic devices, reagents, and biological samples.Industrial systems: Cools lasers, optics, and other heat-sensitive equipment with precision and reliability.What's next?Solid State Cooling Systems continues to lead the way in thermoelectric innovation, offering scalable, eco-friendly solutions for modern thermal management. The ThermoCube II 650 exemplifies this commitment, combining increased capacity, intelligent features, and compact design to meet the evolving needs of science and industry.To explore configuration options or request a quote contact AMS Technologies.

Peltier Cooling Assembly Kit; Cooling Capacity 130 W @+25°C; with Detachable Carrier Plate; Power Supply 24 VDC Key Features: Ideal for Precise Cooling of Medical and Industrial Lasers Efficient Peltier System, no Liquids, no Moving Parts (Except Fans) Allows for Excellent Temperature Stability Low Vibration, Low Noise Lightweight, Very Compact Easy to Integrate The compact mDC-T-130-24-KIT thermoelectric plate-to-air cooling kit was developed for precise temperature control of laser diode modules and direct heat transfer to the ambient air. The highly efficient, solid state mini direct cooling system reaches a cooling capacity of 130 W for 24 VDC supply voltage and +25°C on laser mounting plate and +25 °C ambient temperature. The mDC-T-130-24-KIT Peltier cooling assembly kit comes with a 108 mm x 108 mm mounting plate that can be removed without the need to dismantle the Peltier assembly and can be worked on, i.e. individual mounting patterns can be drilled by the customer. The kit comes with graphite foil and screws pre-mounted. The Peltier modules can be configured for either 12 or 24 VDC. Depending on cooling requirements, the 60 x 60 mm fans' speed can be reduced for quiet operation. We also carry a large range of suitable temperature controllers that can be found here. If your application requires higher cooling capacities, take a look at our mRC-C-450-100/240 mini Recirculating Chiller and our liquid cooling solutions offerings – or browse our large portfolio of liquid to air temperature management assemblies. Your customized direct cooler: AMS Technologies’ thermal management specialists are happy to develop a direct cooling solution tailored to your needs – based on Peltier or compressor technology – and offer all services from development and proof-of concept to series production. Get in touch with us now to discuss your customized direct cooler.  Specifications: Nominal Cooling Capacity: 130 W (@+25°C Ambient, +25°C Mounting Plate (Bottom)) Power Consumption per Fan (Manufacturer’s Data): 6 W Max. Noise (Manufacturer’s Data): 49 dB(A) Coefficient of Performance (COP): 0.57  Applications: Direct Cooling and Precise Temperature Control of Laser Diode Modules With Power Dissipation of up to 130 W  

Vapor Compression Chiller; 1000 W @+35°C (amb)/+25°C (water); Flow Rate 5.5 lpm @ 0.5 bar, Temperature Stability ≥±0.05 K at constant load; Power Supply 90-264 VAC Key Features: Recirculating Water Chiller Easy to be Integrated in Customer Application User-Definable PID Parameters and Fan Velocity Silent Operation with Low Vibration and Noise Ideal for Water Cooling Tasks up to 1000 W Customizable booster cooling capacity IoT Ready as an Option: Remote Operation, Monitoring and Service over Integrated Ethernet Interface Depending on the temperatures of coolant (water) and ambient, AMS Technologies’ mRC-C-1000-100/240 recirculating chiller provides approximately 1000 W (Twater = +25°C, Tambient = +35°C) in silent mode boostable to higher cooling capacities with higher fan speeds. The chiller contains a compressor-based refrigerant circuit as well as a closed, recirculating coolant (water) circuit. Due to its speed-controlled compressor, the mRC-C-1000-100/240 recirculating chiller offers low vibration and noise throughout the compressor’s BLDC speed range. The system’s features include global operability due to a universal 90 to 264 VAC power supply, as well as an optional integrated Ethernet interface allowing remote operation, monitoring and service. Further options are a gear pump providing 5 bar @5 l/min, CPC inlet and/or outlet fittings, external coolant filters or dust filters, and a hardware set for 19” rack mount (6U). For lower heat loads, we also carry a mRC-C-450-100/240 mini Recirculating Chiller with up to 450 W cooling capacity. Specifications: Cooling Capacity: nominal 1 kW (Twater = +25 °C, Tambient = +35 °C) Temperature Stability: +-0.05°C at constant load Available Pressure Head: 0.5 bar @ 5.5 lpm (standard), 5 bar @ 5 lpm (optional) Control: Local, RS232, IoT Ready, Interlock Power Supply: 90 to 264 VAC, 24 VDC Derivative for OEM integrations available on Demand Power Consumption: <750 W Options: 19” Rack Mount (6U); Ethernet / IoT Ready; Optional Pumps; CPC Inlet/Outlet Fittings; External Coolant Filters; External Dust Filters; Green Version Based on Propane (R290) as Refrigerant Dimensions: 443 x 283 x 675 mm, Main Body Without Filter Approval: CE (in process) Applications: Water Cooling of Lasers and Other Applications with up to 1000 W Heat Load

Vapor Compression Chiller; 450W @+25°C; 230VAC; 2lpm; USB/ Ethernet; Benchtop Key Features: Miniature Recirculating Water Chiller Compact Size, Easy to be Integrated in Customer Application User-Definable PID Parameters and Fan Velocity Calm Operation With Low Vibration and Noise Ideal for Water Cooling Tasks up to 450 W IoT Ready: Remote Operation, Monitoring and Service over Integrated Ethernet Interface Full chiller power in a shoebox form factor: the mRC-C-450-100/240 mini recirculating chiller provides to 450 W cooling capacity and contains a compressor-based refrigerant circuit as well as a closed, recirculating coolant (water) circuit that is pressurized – all that in a compact, 350 x 290 x 230 mm housing. This small size is enabled by utilizing a miniature rotary compressor, customized miniature evaporator and condenser. On the coolant side, pressurizing the circuit allows a very small tank, and a compact centrifugal pump also contributes to reduced space requirements. Due to the speed-controlled compressor, the mRC-C-450-100/240 chiller offers low vibration and noise throughout the compressor’s BLDC speed range. Further features are automatic fill and drain of the coolant circuit, global operability due to a universal 90 to 264 VAC power supply, and an integrated Ethernet interface allowing remote operation, monitoring and service. Specifications: Cooling Capacity: 300 W (Twater = +20°C, Tambient = +40°C) to 500 W (Twater = +20°C, Tambient = +20°C) Temperature Stability: +2/-1.5 K Over-/undershoot at 250 W Heat Load ON/OFF, Down to 0.05 K Continuous Operation Available Pressure Head: 1.5 bar @1 lpm; 0.5 bar @5.5.lpm Noise Level: 63 dBA (fan 40%, compressor 100%) Control: Local, USB/Serial, Internet (Web Browser) via Ethernet (IoT Ready) Interlock I/O Alarms: Liquid Level, Tank Pressure, Coolant Feed Temperature, Coolant Flow Rate, Condenser Pressure Power Supply: 90 to 264 VAC, 24 VDC Derivative Available on Demand Power Consumption: <300 W Dimensions: 350 x 280 x 230 mm, Main Body Without Filter Weight: 13 kg Approval: CE Applications: Water Cooling of Lasers and Other Applications; Integration of Water Cooling Capabilities in Systems with Limited Space