Super High-power LCS-Series Collimated LED Light Sources

EFL 3.10 mm; NA 0.68 mm; CA 5.00 mm; OD 6.325 mm; D-ZK3 GlassThe Zemax file of this lens can be downloaded here: file. Do you need...a different coating? A range of standard coatings is available, click here to select your coating option.a mounted aspheric lens? Click here to learn morea customised lens? Click here to contact us!All products supplied by GH Optics are RoHS compliant and meet the requirements of the current EU RoHS Directive 2011/65/EU. The RoHS certificate can be provided on request.

Input Voltage 90-253 VAC; Max. Output Voltage 1-60 kVDC; Max. Power 75 W; Efficiency >75%; Voltage Regulation <0.005% + 1 mV/mA; Current Regulation <0.1% XP Glassman’s MK Series of 75 W high voltage AC/DC power supplies are air-insulated, fast-response, chassis-mount units with tight regulation and low arc discharge currents. A broad range of models is available with output voltage ranges from 0 to 1 kVDC through 0 to 60 kVDC. The MK Series’ current regulation is unequalled in a module of this price range. For example, the regulation from short circuit to rated voltage for the 15 kV, 5 mA model is +2.5 µA. Overload, short circuit and arc protection is provided by automatic current regulation and by careful surge limiting design. XP Glassman’s “Air Insulated” designs are completely serviceable, these modules are not epoxy block “throw-away” power supplies. The MK Series’ standard operation mode is constant voltage/current with less than 800 mJ of stored energy. A “multi-mode” operation mode permits maximum user flexibility. Local voltage or current control is user selectable, and the MK Series power supplies feature remote voltage and/or current control via 0 to +10 V signal or potentiometers. External interlock terminals allow enable/disable of the power supply via TTL signal. Standard accessories for the MK Series include a detachable 2,4 m shielded output cable, mating control connector and line cord. The MK Series supplies with 230 VAC input option (198 to 253 VAC RMS, 48 to 63 Hz) are fully compliant with the following European directives: EN61000-3-2, Line Harmonics EN61010/ IEC61010, Safety EN61000-6-4, Conducted and Radiated Emissions EN61000-6-2:2005, Conducted and Radiated Immunity 2011/65/EU, Restriction of the Use of Hazardous Substances (RoHS) Key Features: Compact Module Air Insulated Low Ripple: <0.03% RMS of Rated Voltage + 0.5 V at Full Load Tight Regulation Static Voltage Regulation: <0.005% + 1 mV/mA, Line and Load Current Regulation: <0.1% From Short Circuit to Rated Voltage at Any Load Condition Constant Voltage/Constant Current Operation Maximum Output Power: 75 W Maximum Output Voltage: 1 to 60 kVDC Maximum Output Current: 1.2 to 75 mA Input Voltage: 105 to 125, 198 to 253 VAC RMS, 48 to 420 Hz, Single Phase Efficiency: >75% at Full Load Output Voltage Accuracy: 1% of Setting + 0.5% of Rated Stored Energy: 200 mJ (10 kV Model), 1 J (50 kV Model) Voltage Monitor: 0 to +10 VDC Signal for 0 to Rated Voltage Current Monitor: 0 to +10 VDC Signal for 0 to Rated Current Stability: 0.01%/h After 0.5 h Warm-up, 0.05% per 8 h Polarity: Positive or Negative Polarity With Respect to Chassis Ground Protection: Against All Overload Conditions, Including Arcs and Short Circuits Remote Controls: DB25S D-Sub Connector and Mating Plug Provided for All Control Input Functions Control Input Functions: +10 V Reference, External Interlock, Current Monitor, Current Program, Voltage Monitor, Voltage Program, TTL, Ground, Local Control Options: 100, 230 VAC Input, 400 Hz Input, Control and Monitor via RS232, USB, Ethernet 3 Year Warranty Approvals: IEC61010-1:2010; EN61000-6-4:2007, Class A EN61000-6-2:2005 Operating Temperature: -10 to +60 °C Dimensions: 120.6 x 131.7 x 279.4 mm Applications: High Voltage, High Power Applications; Photonics; Healthcare (Analytical, Diagnostics, Detectors); Industrial; Semiconductor Manufacturing; Research; Other

260-280 nm; UVC Output Power 50 mW; Supply Voltage 12 VDC; Forward Current 350 mA; Radiation Angle 120° NTT AT Advanced Technology's newly introduced UVC LED module features a very high light output power of 50 mW in the UVC wavelength range from 260 nm to 280 nm. This makes the module ideal for sterilizing surfaces (e.g. the handrail of an escalator) or for use in air purifiers and air conditioners. For example, as an essential functional element of the NTT-AT Advanced Technology GUV-C105 sterilization box, this UVC LED module allows a very short sterilization time of only 90 seconds. The module is very easy to design into devices and systems due to its integrated driver circuit for a 12 VDC power supply as well as performance data such as a beam angle of 120°, very low heat emission or compact dimensions of only 56 x 42 x 27 mm. Key Features: UVC Wavelength: 260 to 280 nm, Ideal for Sterilization High UVC Output Power: 50 mW Radiation Angle: 120° High Irradiation Power Supply Voltage: 12 VDC Power Consumption: 4.2 W Forward Current: 350 mA Forward Voltage Vf:6 to 6.5 V Driving Circuit Included for 12 VDC, 350 mA UVC LED Mounted on Heat Sink Very Low Heat Emission Heat Dissipation: Tj≤+100 °C @ Ta=+40 °C, 350 mA Operating Temperature: 0 °C to +50 °C Compact Size: 56 x 42 x 27 mm, Including Heat Sink Applications: Air Purifiers; Air Conditioners; Water Sterilization; Belt Conveyer Surface Sterilization; Escalator Handrail Sterilization; Surface Sterilization