Skip to main content

SF8XXX Laser Diode Drivers and TEC Temperature Controllers

Product information "SF8XXX Laser Diode Drivers and TEC Temperature Controllers"

Output Current LD 0.25-1.5 A; Output Current TEC ±4 A; Chassis Mount; Compatible with Butterfly Type 1 & Type 2 Lasers; Current Stability <0.1%  

Maiman Electronics’ SF8XXX series of laser diode drivers and TEC temperature controllers are suitable for driving fiber coupled laser diodes in a butterfly package with 10 or 14 pins. SF8XXX series drivers are available with pinouts for Type 1 (Pump) or Type 2 (Telecom, SF8XXX-T) butterfly laser diodes.

The SF8XXX drivers include highly stable (±0.01 A) current sources for the laser diode and a thermoelectric Peltier cooler (TEC). The integrated temperature controller keeps the temperature on the Peltier element with high precision within ±0,01 °C.

The laser diode driver circuit of the SF8XXX series is a non-isolated low drop-out (LDO) regulator with constant current output, producing current with high stability and low ripple. The TEC driver circuit is a non-isolated DC/DC converter, producing low current ripple.

Additional features of the SF8XXX series include an adjustable TEC output current limit and an integrated self-adjusting PID controller, providing optimal temperature regulation. All SF8XXX can be controlled by analog signal or digital signals and switches on the board.

The SF8xxx series drivers are housed in a 61 × 101.6 mm enclosure with aluminium base plate to aid thermal dissipation from the laser diode. SF8xxx series drivers can be mounted on any surface that is thermally conductive enough to dissipate the laser diode’s power loss.

The laser diode mount is located on the board – either with landing pads for soldering a butterfly laser diode directly into driver board or with an integrated mounting Azimuth socket for butterfly packaged devices (-ZIF types).

Key Features:

  • All-in-One Current Source, Temperature Controller and Mount (ZIF-10/ZIF 14 types with Azimuth ZIF Socket) for Butterfly Laser Diodes
  • Compatible with Type 1 Butterfly 10-pin, Type 1 / Type 2 Butterfly 14-pin Laser Diode (Depending on Model)
  • Low Laser Diode Current Ripple: ≤10 µA
  • Laser Diode Current Stability <0.1%
  • Integrated PID Controller, Does Not Require Setup
  • Soft-Start Current Ramp, Current Limit, Temperature Limit for Laser Diode Protection
  • Free Software
  • NTC Thermistor Input
  • Analog Control Signal / RS-232
  • Possibility to Calibrate Current Within 5%


Applications: Supplying Laser Diodes in Butterfly Package; Laser Pumping; Laser Spectroscopy; Laboratory Test Set-ups

Manufacturer "Maiman Electronics"
Related links of the manufacturer

Similar products

0,5A Laser Diode Driver PCB Mount PLD500
The PLD Series Laser Diode Drivers deliver the reliability and performance you expect from a Wavelength Electronics laser driver in a compact and easy-to-integrate package. Tens of thousands of  PLD drivers are deployed in particle counters, manufacturing vision systems, wavefront scanners, fiber aligners, and other laser systems around the world, proving beyond doubt the reliability and  stability of the design.The PLD drivers operate from a single 5 V power supply. To accommodate high compliance lasers, or multiple stacked lasers, the PLD laser diode drivers allow the laser to be driven from a separate power supply up to 30 V.
Product number: C009004-1
Manufacturer:

€487.12*
1,5A QCL Driver - QCL1500
The QCL OEM Series drivers use patented1 circuitry to produce the lowest current noise density of any commercially available QCL driver. The 500 mA QCL driver exhibits noise performance of 0.5 µA RMS to 100 kHz, and average current noise density of 1 nA / √Hz - the lowest available. In order to maintain their characteristically tight center linewidths and minimize jitter, quantum cascade lasers must be powered by drivers with exceptionally low current noise density. Our customers have reported achieving narrower linewidths with these drivers than any other they've used.Key Features Off-the-shelf models at 500 mA, 1 A, 1.5 A, 2 A Can be delivered in other current ranges up to 2 A Compliance voltage 16 V (standard), Compliance 7-20 V with factory modification Safety features protect your QCL investment Adjustable soft-clamping current limit Brown-out, reverse-voltage, & over-voltage protection Driver over-temperature protection circuit Relay shorts output when current is disabled Local and Remote Power-On and Enable control,TTL-compatible Analog modulation input between -5V and +5V.
Product number: C019337-6
Manufacturer:

€3,136.15*
1.25A Laser Diode Driver PCB Mount - PLD1250
The PLD Series Laser Diode Drivers deliver the reliability and performance you expect from a Wavelength Electronics laser driver in a compact and easy-to-integrate package. Tens of thousands of PLD drivers are deployed in particle counters, manufacturing vision systems, wavefront scanners, fiber aligners, and other laser systems around the world, proving beyond doubt the reliability and stability of the design. The PLD drivers operate from a single 5 V power supply. To accommodate high compliance lasers, or multiple stacked lasers, the PLD laser diode drivers allow the laser to be driven from a separate power supply up to 30 V. Key Features Models: 200 mA, 500 mA, 1.25 A, 5 A, and 6.5 A Operates from a 5 VDC supply Separate power supply can be used to drive high-compliance lasers up to 28 V Constant Current or Constant Power modes Safety features protect your laserAdjustable latching current limitSlow-start circuitryRelay shorts output when current is disabled Local and Remote Power-On and Enable controls Integral heatsink and fan on high current model
Product number: C019341-6
Manufacturer:

€529.48*
10A Laser Diode Driver Chassis Mount - PLD10K-CH
The PLD10K-CH is a 10 A Laser Diode Driver in a small chassis mount package. Operating from a single +5 V supply minimizes internal heat dissipation. Modular packaging makes it easy to integrate the PLD into your system. For applications that require a higher forward voltage, a separate laser diode power supply input lets you provide a higher compliance voltage.Key Features Models: 5 A, 10 A, 12.5 A 5 A and 10 A models operate from a single 5 VDC supply; 12.5 A model requires two supplies Separate power supply can be used to drive high-compliance lasers up to 28 V Constant Current or Constant Power modes Safety features protect your laserAdjustable latching current limitSlow-start circuitry Local and Remote Enable controls
Product number: C008974-6
Manufacturer:

€698.92*
Only 2 available
10A Laser Diode Driver PCB Mount - PLD10000
The PLD10000 is powered by a 5 V supply, and the laser can be driven from the same supply. High-compliance lasers can be driven by using a separate supply up to 30 V. Key Features Two models: 10 A and 12.5 A output current PLD10000 can be operated from a 5 VDC supply Separate power supply can be used to drive high-compliance lasers, up to 27.5 V Constant Current or Constant Power modes Safety features protect your laserAdjustable latching current limitSlow-start circuitry Remote Enable controls Optimized heatsink and fan simplifi es integration
Product number: C006586-6
Manufacturer:

€698.92*
12,5A Laser Diode Driver Chassis Mount PLD12.5K-CH
The PLD12.5K-CH is a 12.5 A Laser Diode Driver in a small chassis mount package. Modular packaging makes it easy to integrate the PLD into your system. For applications that require a higher forward voltage, a separate laser diode power supply input lets you provide a higher compliance voltage. One power supply is required for the internal electronics; a separate supply is required to power the laser diode.Key Features Models: 5 A, 10 A, 12.5 A 5 A and 10 A models operate from a single 5 VDC supply; 12.5 A model requires two supplies Separate power supply can be used to drive high-compliance lasers up to 28 V Constant Current or Constant Power modes Safety features protect your laser »» Adjustable latching current limit»» Slow-start circuitry Local and Remote Enable controls
Product number: C008990-6
Manufacturer:

€808.07*
Only 2 available
12,5A Laser Diode Driver PCB Mount - PLD12500
The high current PLD drivers couple the high-reliability architecture of Wavelength Electronics' lower-current PLD Series with a robust high-current output stage. Tens of thousands of PLD drivers are deployed in laser systems around the world, proving beyond doubt the reliability and stability of the design. PLD Series laser power supplies are found in fiber laser pumping, materials processing, pyrotechnic ignition, industrial welding and cutting applications, and laser diode LIV testers. It is CE certified. A PDF version of the Declaration of Conformance is available.The PLD10000 drives up to 10 A, and the PLD12500 drives up to 12.5 A. With a compliance voltage capability of 27.5 volts, these PLD drivers are ideal for driving laser bars and stacks for high-power industrial applications. Lower-current drivers are offered in the PLD Series, available in SIP PCB-mounted models at 200 mA, 500 mA, 1.25 A, 5 A, and 6.5 A output.Key Features Two models: 10 A and 12.5 A output current PLD10000 can be operated from a 5 VDC supply Separate power supply can be used to drive high-compliance lasers, up to 27.5 V Constant Current or Constant Power modes Safety features protect your laserAdjustable latching current limitSlow-start circuitry Remote Enable controls Optimized heatsink and fan simplifies integration
Product number: C006603-6
Manufacturer:

€808.83*

Customers also viewed

TCube Edge 4A (10-14072-4A-0-F2P3A7) TEC Chiller
330 W @ 20°C; >2 lpm @ 14 psig; 1/4 Valved CPC Fittings; Centrifugal Pump; Aluminum This thermoelectric recirculating chiller is a low-cost, high-performance device optimized for lasers, optics and life sciences. It features precise temperature control (±0.05°C repeatability), long-life reliability, quiet operation and environmental friendliness in a compact size. Using universal power, the TEC chiller is very energy efficient only drawing power when required.
Product number: C021530-6
Manufacturer:

€3,775.00*
Only 1 available
PLDEVALPCB Evaluation Board
The PLDEVALPCB evaluation board is used with following laser diode drivers from Wavelength Electronics: PLD6500, PLD5000, PLD1250, PLD500 or PLD200. It simplifies benchtop operation of the PCB mount drivers and reduces prototyping time. This evaluation board does not include the laser diode driver itself. It includes a terminal strip for easy wiring to the power supply and laser diode. DVM cable ready test points monitor the setpoint, current limit, and photodiode signal voltages. These voltages are also on the terminal strip along with the LD Enable and Modulation inputs. Onboard switches select main power on, enable / disable, and whether the DVM point monitors laser or photodiode current. An LED indicates when main power is on. A shorting bar ties the high compliance input to +5 V. It can be removed for high compliance voltage operation. Remote computer control is available using the separate available USBKIT, which also allows graphing and datalogging.
Product number: C006568-6
Manufacturer:

€287.50*
PMJ PM Patch Cables
Polarization Maintaining; 480 to 1625 nm; Fiber Type PANDA, others; Insertion Loss ≤0.4 to ≤1.5 dB; Operating Temperature Range -20 to +70 °C OZ Optics’ PMJ series of polarization maintaining (PM) patchcords are based on a high precision butt-style connection technique. The PM axis orientation is maintained by using male connectors with a positioning key and a bulkhead female receptacle with a tightly toleranced keyway, ensuring good repeatability in extinction ratios and insertion losses.The polarization axis of a fiber is aligned with the connector key by rotating either the connector frame or the fiber itself until the polarization axis is in line with keyway of the connector. Once the fiber is correctly aligned, the alignment can be fixed with a drop of glue or epoxy. OZ Optics minimizes backlash and rotational errors in the PM axis alignment by using specially designed PM ferrules and connector housings.Patchcords are normally offered pre-aligned and referenced with the slow axis aligned to the connector key for optimum coupling efficiency and extinction ratios. Non-angled FC PM connectors are also available unaligned and unlocked (rotatable) for lab use. Unless otherwise specified, pre-aligned patchcords are oriented such that the slow axis of the fiber is aligned with the key of the connector and locked. These patchcords maintain polarization to better than 20 dB. Higher extinction ratios are available upon request. In general, OZ Optics uses polarization maintaining fibers based on the PANDAfiber structure when building polarization maintaining components and patchcords. However OZ Optics can construct devices using other PM fiber structures, including 80 µm cladding sizes. If necessary, OZ Optics is willing to use customer supplied fibers to build devices. OZ Optics uses a 2.00 mm housing key for its standard FC/PC PM connector design. This is known also as a type “R” keywidth. Also available are FC/PC connectors with a 2.14 mm housing key (Type “N”). Sleeve through adaptors are available to connect same size keys or to convert from a 2.00 mm to a 2.14 mm key connector. In addition to patchcords and sleeve through adaptors, OZ Optics provides male PM connectors and ferrules for fiber termination, bulkhead receptacles to attach fibers to devices as well as ferrules for different fiber sizes. Key Features: Terminations Available: FC/PC, SC, ST, LC, MU, E2000 Custom Ferrule Terminations Available High Extinction Ratios (20 dB to 40 dB) Low Insertion Losses (<0.2 dB typ.) Custom Angles Available Compatible with Industry Standard Connectors Designed to Meet Telcordia Specifications Applications: High-speed (10 Gbs / 40 Gbs) Telecommunications; Interferometric Sensors; Integrated Optics; Fiber Amplifiers; Coherent Telecommunications
Product number: SW10534
Manufacturer: