SF8025-14T Laser Diode Driver and TEC Temperature Controller

4 UVC-LEDs; 260-280 nm; Total UVC Power 105 mW; Sterilization Time 90 s; Dimensions Sterilization Chamber 20x9x11 cm; Power Supply 5 VDC, 2 A High-speed sterilization in 90 seconds: NTT Advanced Technology’s GUV-C105 UVC sterilization box allows its contents to be sterilized quickly and effectively with the power of deep ultraviolet (UVC) light. Simply insert the item to be sterilized, close the lid and press the button - thanks to the high UVC output of the four built-in UVC LEDs totalling 105 mW, it takes just 90 seconds to sterilize 99.9% of the bacteria present! We follow the distance rules, wear masks and wash our hands. But are the mask, glasses, watch, other accessories or the smartphone that you have with you all day safe? Use the GUV-C105 UVC sterilization box and sterilize masks, glasses, cutlery, stationery, smartphones, etc. with the power of deep ultraviolet light. The procedure is simple, fast and reliable. Disturbing or unpleasant odours known from ozone sterilizers do not occur here. The GUV-C105 UVC sterilization box is based on NTT Advanced Technology's UVC LED Module with 50 mW UVC light output. Thanks to consistent low-power design, the power consumption is very low at 5 VDC and 2 A, so the unit can be operated with standard USB power supplies. The compact driver circuit with GaN FET maximises the available space in the box and minimises the external dimensions. The GaN FET inside the sterilization box is manufactured using NTT AT technology. Key Features: Sterilization Time: 90 s Low Power Consumption: Standard USB Power is Sufficient Large Sterilization Chamber: 20.0 x 9.0 x 11.0 cm Small Outside Dimensions (22.8 x 13.9 x 13.8 cm), Compact Drive Circuit Saves Space Drive Circuit Using GaN FET Enables High-power LED Drive With Low Power Consumption and Small Size UVC LED: 4 Pieces UVC Wavelength: 260 to 280 nm Total UVC Power : 105 mW (2 x 50 mW, 2 x 2.5 mW) Power Supply: 5 VDC, 2 A Applications: Sterilizing Items in 90 s; Removing 99.9% of the Bacteria Present

Small Bowl; Optimized for Fiber Splicing; Fiber Cladding 50-1,500 µm; Fiber Coating 80-2,000 µm; Cleaning Cycle Time 3-48 s; Frequency Tuned Oscillation; Power Supply 100-240 VAC 3SAE Technologies’ USC Ultrasonic Cleaner is a purpose-built ultrasonic fiber cleaner that was designed specifically for fiber splicing applications. Many years of splicing experience went into the functional, ergonomic design that ensures consistent cleaning results and easy fiber loading. Operation of the 3SAE Technologies Ultrasonic Cleaner is easy and intuitive. The fiber holder rail can be configured to accommodate Fitel, Fujikura, Ericsson or 3SAE Technologies fiber holders. To operate, simply lower the fiber holder down the rail and press the start button. Audible and visual indicators indicate when the fiber should be removed. Additionally, the unit is designed to dip fibers in the ultrasonic bath without the use of fiber holders. The intensity of cleaning can be adjusted to optimize results for different fiber types and sizes. Programmable presets can be provided for special applications. 3SAE Technologies' complete line of preparation tools, including the ultrasonic cleaners, are configurable for use with Fitel, Fujikura, 3SAE or Ericsson fiber holders. Use of fiber holders provides a repeatable handling process across strip, clean, cleave and splice equipment for high-strength splicing and improved yield. 3SAE Technologies' complete line of fiber holder compatible preparation tools incorporates the thermal stripper, ultrasonic cleaner and fiber cleavers. Ultrasonic cleaning has long been the preferred means of cleaning optical fibers for critical splicing applications. Today's high-power glass processing applications are sensitive to contamination and fatigue that results from hand cleaning and demand a thorough, non-contact cleaning alternative. Use of an ultrasonic cleaner ensures ultimate cleanliness and is essential for maximizing post process optical fiber performance and reliability. Key Features: Optimized for Fiber Splicing Fiber Cladding: 50 µm to 1.5 mm Fiber Coating: 80 µm to 2.0 mm Fiber Holder Compatible for all Fusion Splicers Fitel, Fujikura, 3SAE Technologies or Ericsson Fiber Holder Compatible Platforms Available Compact, Low-maintenance Bench-top Design Fast Cycle Time Adjustable Cleaning Times, Cycle Time: 3 to 48 s One-touch Operation Frequency Tuned Oscillation One-step Alcohol Disposal Operator Independent Dimensions: 76 x 134 x 191 mm Power Supply: 100 to 240 VAC No PC Connection Required No Calibration Required Application: Ultrasonic Cleaning of Optical Fibers; Fiber Splicing

Multipurpose Fiber Splicing & Processing System; Fiber Diameter 125-2,500 µm; “Ring of Fire” Heat Source for Even Heating; Alignment of up to 10 Axes; Pitch & Yaw Axes Alignment to 0.01° The LDS 2.5 Large Diameter Splicing System is the latest version of 3SAE Technologies’ multipurpose fiber splicing and processing system for fiber diameters ranging from 125 to 2,500 µm. The LDS 2.5 is utilizing 3SAE Technologies’ 30 years of fiber splicing and processing experience and it is specifically designed with flexibility in mind. The LDS 2.5 is a modular system which can be adapted and customized for production of different fused optical components such as high-power fiber combiners, mode field adapters, fiber probes, end cap splicing and splicing dissimilar sized standard or exotic fiber combinations. Various System Upgrade Packages are available: Tapering Package, Bundling Convenience Package (Tapering Package Required), Polarization Maintaining (PM) Splicing Package, and Integrated Piezo LDF Cleaving System Package. The LDS 2.5 provides capabilities that overcome the hurdles of current fiber component fabrication processes to meet the most demanding requirements. Designed for reproducibility, precision, and user-friendly operation, the LDS 2.5 provides the user a manufacturing approach to optical component product development. Its extreme flexibility enables customers to realize current and future glass processing and fusion splicing possibilities. Precision mechanical design, high-contrast optics and absolute control of positional and angular fiber alignment sets the LDS 2.5 apart from competing technologies. A sophisticated image processing software package allows the user to view, in real time, the progress of a splice or taper. The system handles fiber diameters from 125 µm to 2.5 mm, as well as optics such as prisms, end caps, and lenses, with alignment and fusion of unsurpassed quality. 3SAE Technologies has the ability to offer customized LDS 2.5 systems to meet very specific customer requirements. Please get in touch with the AMS Technologies fiber processing equipment experts to discuss your specific application. Key Features: Powerful, Positionable “Ring of Fire®” Heat Source Provides Even Heating for Fiber Splicing, Fiber End-capping, Photonic Crystal Fiber (PCF) Splicing and Many Other Applications Including Tapering, Collapsing and Fusing Splicing of 125 μm to 2.5 mm Diameter Fibers Using One Machine System Capable of Splicing Materials With High Melting Temperatures Ability to Splice Dissimilar Fiber Diameters or Materials Unique Capability to Fuse Pre-made End Caps With Vastly Dissimilar Diameters Than the Input Fibers Pitch and Yaw Axes Provide +/- 5° Range of Motion With Automatic 0.01° Alignment Up to 10 Axes of Alignment Easy to Use GUI Features Configurable Operator Levels for Production Environments Scanning Software Scans Fiber Diameters Before or After Splice or Taper Real-time Data and High-quality Process Images Can Be Captured and Automatically Saved “Hot” Imaging With Two Independent, Orthogonally Mounted Cameras Enables Users to View Fiber Processes in Real Time Many Photonic Crystal Fibers (PCF) Can be Spliced With Little or No Air Hole Collapse Capability of Uniformly Collapsing Photonic Crystal Fiber (PCF) “Ionic Ablation” Fiber Cleaning Provides a Secondary Cleaning of Optical Fibers Extremely High Splice Strengths Achievable Without Repetitive Passes of the Plasma Field Piezo-driven Flexure Stage and Software Package Providing 130 μm of Vibration-free Z-axis Motion With 0.25 μm Theoretical Resolution Vacuum Holding System for Stable, Precise Control of Hard-to-handle Optical Components Mechanical Platform Easily Interchangeable With Optional 16 mm Standard Fiber Holder Platform Applications: Splicing of Fiber End Caps; Splicing Dissimilar Sized Standard or Exotic Fiber Combinations; Tapering; Fabrication of High-power Fiber Laser Components Such as Mode Field Adapters, Pump Combiners and Pump/Signal Combiners