SDS High Voltage
APD HV4479 High-Voltage DC/DC Converters
Ultra-compact, Adjustable Output; Input Voltage 11.5 – 13.5 VDC, 22.5 – 26.5 VDC; Output Voltage 300 V, 600 V, 1 kV, 2 kV
The HV4479 series is a direct replacement and pin-to-pin compatible to the standard 4479 converters. The micro-size and lightweight converters feature very low noise and low drift and are available as 12V and 24V models. The HV4479 has voltage and current monitors, a low temperature coefficient and is protected against arc and short-circuit. It is available with output voltages of 300 V, 600V, 1kV and 2kV.
Key features:
Very low noise – very low drift
Vout: 300V, 600V, 1kV or 2kV models
Vin: 12 or 24V options
Polarity: fixed, negative or positive options
Remote voltage programming or embedded potentiometer
Voltage & current monitors
Output overshoot free, limited slew rate
Applications: Photomultiplier tubes and avalanche photo diodes
Product number:
SW11992
Manufacturer:
SDS High Voltage
APD Series High Voltage DC/DC Converters
Compact Size; Input Voltage 4.5 to 15.5 VDC; Output Voltage 200 to 500 VDC, programmable from 0 to 100%; Output Power 100 mW
The highly compact SDS's APD series is specially designed to meet the high voltage power requirements of scientific instrumentation used in the industrial, medical and military sectors. These modules provide access to voltages of up to 500 VDC in instruments where space is an important factor in order to achieve greater quantum efficiency and reduced total leakage current. With its ultra-miniaturized (5.75 cm³) metal case, the APD HV DC/DC converter series features low radiation noise. The devices are also lightweight (13 g) and allow for flat mounting on printed circuit boards with a height of only 11 mm. 64 models provide voltages from 200 VDC to 500 VDC at a power level of 0.1 W.Tight line and load regulation of <±0.01%, a low temperature coefficient of 50 ppm/°C and a low ripple of 7mVp-p all contribute to the APD series’ very high output stability.
Key Features:
Micro size and lightweight
PCB flat mounting
Voltage monitor
Tight line & load regulation
Arc and short circuit protected
Inhibition mode
Low ripple
Low temperature coefficient
Optional flying lead for HV output
Applications: Small, Lightweight, Portable Devices; Fiber-optic Telecom Detectors; Particle Physics Detectors; Laser Range Finder Detectors; Thin-film Bias; Avalanche Photo Diodes (APD); Silicon Photomultipliers (SiPM); Multi-pixel Photon Counter (MPPC); Ionization Detectors; Ultrasonic Transducers; Small PZT Drivers; ATE Leakage Testing; Bias Supplies
Product number:
SW10332
Manufacturer:
SDS High Voltage
APD12N0.2-0.1-C2.5 (former APD12N201501) High Voltage DC/DC Converter
€123.13*
Input Voltage 12-15 VDC; Output Voltage 200 VDC; Output Power 0.1 W; PCB flat Mounting; Negative Output Voltage
This item is compatible with Advanced Energy item number 0.2US12-N0.1
Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.
Product number:
C014055-6
Manufacturer:
SDS High Voltage
APD12N0.3-0.1-C2.5 (former APD12N301331) High Voltage DC/DC Converter
€123.14*
Input Voltage 12-15 VDC; Output Voltage 300 VDC; Output Power 0.1 W; PCB flat Mounting; Negative Output Voltage
This item is compatible with Advanced Energy item number 0.3US12-N0.1
Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.
Product number:
C014065-6
Manufacturer:
SDS High Voltage
APD12N0.5-0.1-C2.5 (former APD12N501201) High Voltage DC/DC Converter
€123.13*
Input Voltage 12-15 VDC; Output Voltage 500 VDC; Output Power 0.1 W; PCB flat Mounting; Negative Output Voltage
This item is compatible with Advanced Energy item number 0.5US12-N0.1
Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.
Product number:
C014068-6
Manufacturer:
SDS High Voltage
APD5N0.2-0.1-C2.5 (former APD5N201501) High Voltage DC/DC Converter
€123.13*
Input Voltage 5 VDC; Output Voltage 200 VDC; Output Power 0.1 W; PCB flat Mounting; Negative Output Voltage
This item is compatible with Advanced Energy item number 0.2US5-N0.1
Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.
Product number:
C014061-6
Manufacturer:
SDS High Voltage
APD5P0.2-0.1-C.2.5 (former APD5P201501) High Voltage DC/DC Converter
€124.61*
Input Voltage 5 VDC; Output Voltage 200 VDC; Output Power 0.1 W; PCB flat Mounting; Positive Output Voltage
This item is compatible with Advanced Energy item number 0.2US5-P0.1
Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.
Product number:
C014062-6
Manufacturer:
SDS High Voltage
APD5P0.2-0.1-C2.5-L (former APD5P201501L) High Voltage DC/DC Converter
€147.69*
Input Voltage 5 VDC; Output Voltage 200 VDC; Output Power 0.1 W; PCB flat Mounting; Positive Output Voltage
This item is compatible with Advanced Energy item number 0.2US5-P0.1-WS
Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.
Product number:
C014063-6
Manufacturer:
SDS High Voltage
APD5P0.3-0.1-C2.5 (former APD5P301331) High Voltage DC/DC Converter
€123.14*
Input Voltage 5 VDC; Output Voltage 300 VDC; Output Power 0.1 W; PCB flat Mounting; Positive Output Voltage
This item is compatible with Advanced Energy item number 0.3US5-P0.1
Further variants of this series with various inputs, outputs voltages and powers are available.For more information or to place an order please look into the datasheet or contact us.
Product number:
C014066-6
Manufacturer:
SDS High Voltage
APD5P0.4-0.1-C.2.5 (former APD5P401251) High Voltage DC/DC Converter
€123.13*
Input Voltage 5 VDC; Output Volage 400 VDC; Output Power 0.1 W; PCB flat Mounting; Positive Output Voltage
This item is compatible with Advanced Energy item number 0.4US5-P0.1
Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.
Product number:
C014067-6
Manufacturer:
SDS High Voltage
APD5P0.5-0.1-C2.5 (former APD5P501201) High Voltage DC/DC Converter
€123.13*
Input Voltage 5 VDC; Output Voltage 500 VDC; Output Power 0.1 W; PCB flat Mounting; Positive Output Voltage
This item is compatible with Advanced Energy item number 0.5US5-P0.1
Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.
Product number:
C014069-6
Manufacturer:
SDS High Voltage
DA Series High Voltage DC/DC Converters
Ultra-compact, Adjustable Output; Input Voltage 15, 24 VDC; Output Voltage 0 to 4,000 VDC; Output Power 1 to 4 W
The DA series of PCB mount, ultra compact, regulated, high voltage DC/DC converters is particularly adapted to controlling photonic detectors that need high bias voltages and currents. Industrials, integrators and researchers will benefit from the units small size, lightweight design, excellent voltage regulation and reduced residual undulation.
Key Features:
Small Height and Lightweight
Tight Line/Load Regulation
Low Ripple (0.005% p. to p.)
PCB Flat Mounting
Voltage Monitoring
Input Monitoring
Logical ON/OFF Input
Applications: Avalanche Photo Diodes (APD); Electrostatic Chuck (E-chuck); Gas Chromatography; Geiger-Mueller Tubes (GM Tubes); Particle Physics Detectors; Scanning Electron Microscopes; Laser Range Finder Detectors; Photomultiplier Tubes (PMT); PZT Drivers
Product number:
SW10491
Manufacturer:
SDS High Voltage
DA24N1-1-C5 (former DA24N102102-5) High Voltage DC/DC Converter
€351.14*
Input Voltage 24 VDC; Output Voltage 1000 VDC; Output Power 1 W; PCB flat Mounting; Negative Output Voltage
This item is compatible with Advanced Energy item number 1D24-N1
Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.
Product number:
C014072-6
Manufacturer:
SDS High Voltage
Only 1 available
DA24N4-2-C5 (former DA24N402501-5) High Voltage DC/DC Converter
€389.14*
Input Voltage 24 VDC; Output Voltage 4000 VDC; Output Power 2 W; PCB flat Mounting; Negative Output Voltage
This item is compatible with Advanced Energy item number 4D24-N2
Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.
Product number:
C014074-6
Manufacturer:
SDS High Voltage
DA24P1-2-C5 (former DA24P102202-5) High Voltage DC/DC Converter
€351.15*
Input Voltage 24 VDC; Output Voltage 1000 VDC; Output Power 2 W; PCB flat Mounting; Positive Output Voltage
This item is compatible with Advanced Energy item number 1D24-P2
Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.
Product number:
C014073-6
Manufacturer:
SDS High Voltage
Only 1 available
DA24P4-2-C5 (former DA24P402501-5) High Voltage DC/DC Converter
€389.14*
Input Voltage 24 VDC; Output Voltage 4000 VDC; Output Power 2W; PCB flat Mounting; Positive Output Voltage
This item is compatible with Advanced Energy item number 4D24-P2
Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.
Product number:
C014075-6
Manufacturer:
SDS High Voltage
DE Series High Voltage DC/DC Converters
Ultra-compact, Adjustable Output; Input Voltage 15, 24 VDC; Output Voltage 0 to 6,000 VDC; Output Power 1 to 6 W
The DE series of PCB mount ultra compact, regulated, high voltage DC/DC converters is particularly adapted to controlling photonic detectors that need high bias voltages and currents. Industrials, integrators and researchers will benefit from the units small size, lightweight design, excellent voltage regulation and reduced residual undulation.
Key Features:
Small Height and Lightweight
Tight Line/Load Regulation
Low Ripple (0.02% p. to p.)
PCB Flat Mounting
Voltage Monitoring
Input Monitoring
Logical ON/OFF Input
Applications: Avalanche Photo Diodes (APD); Electrostatic Chuck (E-chuck); E-Beam Lithography and Welding; Focused Ion Beam (FIB); Gas Chromatography; Geiger-Mueller Tubes (GM Tubes); General Laboratory; High Voltage Testing; Image Intensifiers (II); Insulator Testing; Lithography; Microchannel Plates (MCP); Photodiodes (PD); Photomultiplier Tubes (PMT); Scanning Electron Microscopes; Spectrometers
Product number:
SW10490
Manufacturer:
SDS High Voltage
DE24N1-6-C5 (former DE24N102602-5) High Voltage DC/DC Converter
€386.25*
Input Voltage 24 VDC; Output Voltage 1000 VDC; Output Power 6 W; PCB flat Mounting; Negative Output Voltage
This item is compatible with Advanced Energy item number 1D24-N6
Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.
Product number:
C014071-6
Manufacturer:
SDS High Voltage
DE24N6-4-C5 (former DE24N602661-5) High Voltage DC/DC Converter
€470.97*
Input Voltage 24 VDC; Output Voltage 6000 VDC; Output Power 4 W; PCB flat Mounting; Negative Output Voltage
This item is compatible with Advanced Energy item number 6D24-N4
Further variants of this series with various inputs, outputs voltages and powers are available. For more information or to place an order please look into the datasheet or contact us.
Product number:
C014070-6
Manufacturer:
SDS High Voltage
DEP Series High Voltage DC/AC Power Supplies
Ionizer for Medical Devices; Input Voltage 24 VDC; Output Voltage 300 to 5,000 VAC rms; Output Power 5 W
Powerful & highly efficient, the DEP series of high voltage DC/AC power supply produces a high AC Output up to 5,000 V (5 kV) rms with 270 Hz. With these features, the power supply is suitable for depollution, surface treatment and depolarization applications in various systems using corona discharges.
This single output space-saving regulated high voltage inverter is available in block configuration and is equipped with voltage and current monitoring and protection against overload, short circuit and arc.
Key Features:
Input Voltage: 24 VDC
Output Voltage: Adjustable from 300 V to 5 kV rms
Output Power (nominal): 5 W
Frequency: 250 Hz or 700 Hz
Applications: Depollution; Surface Treatment; Depolarization
Product number:
SW10333
Manufacturer:
SDS High Voltage
GIPO Series High Voltage Pulse Generators
Small Size; Input Voltage 85 to 264 VAC; Output Voltage -500 to -5,500 VDC; Pulse Rising Edge from 2.5 ns
The GIPO series is the instrumented stand-alone version of the GIPO series. It features a clear screen display control panel. Based upon the use of field-effect transistor technology, the GIPO-SAU series of high voltage pulse generators can produce pulses up to 5.5 kVDC, with a rise time of just a few nanoseconds (generally 3 ns), with an adjustable pulse length as short as 200 ns and as long along as 30 μs for charging capacitive loads.
A high-voltage power supply with very high stability (10 ppm/°C) is integrated in the GIPO high-voltage pulse generator. For stand-alone operation, the user can set the amplitude. width and frequency of the HV pulse output with the help of 10-turn potentiometers. For remote control operation, the equipment is fitted with an input for external 0/10 VDC analog signal. HV pulses are triggered manually with a frontpanel pushbutton (one shot), periodically in internal mode or by an external trigger signal. This stand-alone pulse generator is fully qualified and has been tested by some of the major optical and photonics companies.
Key Features:
Stand-alone HV pulse generator
Pulses can reach 5.5 kVDC; <3 ns (typ. 2.5 ns)
Pulse width adjustable from 22 ns to 30 µs
Adjustments can be made locally via 10-turn potentiometers or remotely
Applications: Pockel Cells, Multi-Channel Plates, Intensified CCDs, Laser Diodes, Flash Lamps
Product number:
SW10331
Manufacturer:
SDS High Voltage
GIPO-SAU Series High Voltage Pulse Generators
Stand-alone Device; Input Voltage 85 to 264 VAC; Output Voltage -500 to -5,500 VDC; Pulse Rising Edge from 2.5 ns
The GIPO-SAU series is the instrumented stand-alone version of the GIPO series. It features a clear screen display control panel. Based upon the use of field-effect transistor technology, the GIPO-SAU series of high voltage pulse generators can produce pulses up to 5.5 kVDC, with a rise time of just a few nanoseconds (generally 3 ns), with an adjustable pulse length as short as 200 ns and as long along as 30 μs for charging capacitive loads.
A high-voltage power supply with very high stability (10 ppm/°C) is integrated in the GIPO high-voltage pulse generator. For stand-alone operation, the user can set the amplitude, width and frequency of the HV pulse output with the help of 10-turn potentiometers. For remote control operation, the equipment is fitted with an input for external 0/10 VDC analog signal. HV pulses are triggered manually with a frontpanel pushbutton (one shot), periodically in internal mode or by an external trigger signal. This stand-alone pulse generator is fully qualified and has been tested by some of the major optical and photonics companies.
Key Features:
Stand-alone HV pulse generator
Pulses can reach 5.5 kVDC; <3 ns (typ. 2.5 ns)
Pulse width adjustable from 22 ns to 30 µs
Adjustments can be made locally via 10-turn potentiometers or remotely
Applications: Pockel Cells, Multi-Channel Plates, Intensified CCDs, Laser Diodes, Flash Lamps
Product number:
SW10330
Manufacturer:
SDS High Voltage
HV-LAB Series High Voltage AC/DC Power Supplies
Bench-top Configuration; Input Voltage 85 to 264 VAC; Output Voltage 0 to 6,000 VDC; Output Power 0.1 to 6 W
The HV LAB Series is a compact AC-DC bench-top high voltage power supply with adjustable output voltage. The HV-LAB power supply series is equipped with 4.3” resistive touch LCD screen on the front panel and is associated with a rota- ting knob for instantaneous and precise adjustment of settings.
For remote operation, the device offers a USB-B and a SUBD9 connectors on the rear panel for voltage / current control and monitoring via USB serial (COM) and RS232 protocols. Others communications buses can be implement on rear panel SUBD9 connector upon request (ex: CAN interface, RS485…).
Key Features:
Bench top configurations
Wide range of outputs
Overload, short circuits and arc protections
Single positive or negative output
Current and / or voltage monitoring
Power: 0.1 W up to 6 W
Applications: General high voltage; Bias supplies; Detectors (PMTs-APDs); Lasers, Electrophoresis; Electrostatic chucks
Product number:
SW10334
Manufacturer:
SDS High Voltage
Micro APD Series High Voltage DC/DC Converters
Ultra-compact, Adjustable Output; Input Voltage 5, 12 VDC; Output Voltage 0 to 100 VDC; Output Power 100 mW
SDS High Voltage's Micro APD series of PCB-mount, ultra compact, regulated, high voltage DC/DC-converters is the smallest regulated DC-DC power supply for APDs and MPPCs that need a bias voltage ranging from 0 to 100V.
Key Features:
Ultra Miniature and Lightweight
Tight Line/Load Regulation
Low Ripple (<50 V p. to p.)
PCB Flat Mounting
Output Current Limit Protection
Applications: Avalanche Photo Diodes (APD); Silicon Photomultipliers (SIPM)
Product number:
SW10495
Manufacturer:
SDS High Voltage
SDS High Voltage designs, manufactures and distributes high voltage power supplies from 100 V to 50 kV with power from 100 mW up to 100 W. The offer includes both DC-DC and custom AC-DC high-voltage power supplies, specifically adapted to customer needs.
SDS High Voltage has a unique expertise in the high voltage power conversion and the high stability fields. The products are available in various forms such as non-instrumented blocks, bench-tops and socket assemblies.
From the beginning of the 80’s, the HV high quality power supplies are used for various fields as medical, research, defense and scientific instrumentation.